Loading…
Name ID Label Description Type Access Class
upperRange_value 00EA PV URV Valor de faixa superior- Define o endpoint operacional do qual o valor analógico, e o ponto 100% da faixa de porcentagem são derivados. Além do que, o valor da faixa superior define um endpoint operacional no qual o alarme associado com o valor analógico, e os alarmes associados com a representação do valor digital são derivados. R/W Float 32
lowerRange_value 00EB PV LRV Valor da faixa inferior- Define o endpoint operacional do qual o valor analógico, e o ponto de )% da faixa de porcentagem são derivado. Além do valor da faixa inferior definir um endpoint operacional no qual o alarme associado com o valor analógico, e os alarmes associados com a representação de valor digital são derivados. R/W Float 32
pv_Value 4036 PV R Float 10
pv_Units 4037 Unidade de sensor PV Unidade de variável do dispositivo de campo- Unidade de engenharia para ser apresentada com a representação do valor digital, intervalo mínimo, valor da faixa superior, valor da faixa inferior, limite do sensor inferior, e limite do sensor superior R/W Enum 8
pv_USL 400B USL Valor do limite do sensor superior- Define o valor máimo usável para o valor de faixa superior. R Float 8
pv_LSL 400A LSL Valor do limite do sensor superior- Define o valor máimo usável para o valor de faixa superior. R Float 8
pv_Min_Span 400C Minimum Span Valor de intervalo mínimo- Define a menor diferença permitida entre o valor de faixa superior e o valor de faixa inferior. R Float 8
pv_Damp 4038 Damping Valor de amortecimento- a constante de tempo de amortecimento aplicada para a representação do valor digital e valor analógico da respectiva saída analógica. As unidades dessa variável são sempre em segundos. R/W Float 8
pv_SSN 4007 Número serial do sensor Número de série do sensor – Unicamente indentifica o sensor do qual a representação de valor digital ou variável do dispositivo de campo é primariamente derivada. R/W Unsigned 2048
analog_value 400D AO Valor de saída analógica – valor que segue a representação do valor digital, sob modo normal de operação R/W Float 66
fail_mode 400E Alarme do Tipo AO Tipo de alarme de saída analógica- Define como a saída analógica responderá quando o dispositivo de campo detectar a saída analógica poderá não seguir a variáveldo dispositivo de campo. NOTA- A representação do valor digital poderá não ser determinada. R Enum 64
transfer_function 1F84 Função Xfer Transferência de Função-Define a função de transformação que será aplicado a partir de a variável Dispositivo de Campo para a saída analógica, e Faixa de Porcentagem. A transferência Função não afeta a representação Valor Digital. R Enum 32
percent_range 4039 % da faixa PV Porcentagem da faixa – Variável que segue a representação do valor digital em relação à faixa definida pelo valor da faixa inferior e valor da faixa superior, para modos de operação normal. As unidades dessa variável são sempre em porcentagem. R Float 34
sv_Value 403A Temp (SV) Secondary variable temperature R Float 10
sv_Units 403B Temp (SV) unit Secondary variable temperature engineering units R/W Enum 8
tv_Value 403C Cond/Conc (TV) Device Tertiary Variable (TV). TV = Concentration value when PV type = Conductivity. TV = Conductivity value when PV type = Concentration. R Float 10
tv_Units 403D Cond/Conc (TV) unit Tertiary variable conductivity or concentration engineering units R/W Enum 8
qv_Value 403E Uncomp Cond (QV) Quaternary variable temp-uncompensated conductivity R Float 10
qv_Units 403F Uncomp Cond (QV) unit Quaternary variable uncompensated conductivity engineering units R/W Enum 8
var_TB82_primary_value_type 400F PV type Primary Value (PV) type selection. When PV type = Conductivity, PV value = Conductivity and TV value = Concentration. When PV type = Concentration, PV value = Concentration and TV value = Conductivity. R/W Enum 8
var_TB82_sensor_group 4010 Snsr group Three sensor groups are applied and defined by the sensor cell constant: A, B and C. R/W Enum 8
var_TB82_sensor_diagnostics 4021 Snsr diagnostics Sensor Diagnostics selection determines whether certain sensor diagnostics are enabled or disabled R/W Enum 8
var_TB82_solution 4011 Solution type The solution type defines the solute algorithm used for concentration configurations. Both predefined and user-defined concentration configurations are available. The available solution types are dependent upon the current SENSOR_GROUP. Sensor Group A: 0 to 15% NaOH, 0 to 20% NaCl, 0 to 18% HCl, 0 to 20% H2SO4, User Defined. Sensor Group B: User Defined. Sensor Group C: User Defined. R/W Enum 8
var_TB82_usrdef_secondary 4012 Concen curve name This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration R/W ASCII 2048
var_TB82_usrdef_unit 4013 User def conc unit Engineering units for user defined concentration curve This will be used as the concentration value units when a user defined concentration curve is selected. R/W Enum 8
var_TB82_concentration_range 4014 Concen range The concentration range can be set when the solution type is set to user defined. For all other solution types it is read-only R/W Enum 8
var_TB82_temp_sensor_type 4022 Temp snsr type Temperature sensor type R/W Enum 8
var_TB82_temp_comp_type 4023 Temp comp type Determines the type of Temperature Compensation algorithm applied to the Primary Value R/W Enum 8
var_TB82_manual_temp_setpoint_unit 4043 Manual temp unit R/W Enum 8
var_TB82_manual_temp_setpoint 4028 Manual Temp. Manual Temperature value is used in the temp comp algorithm when the temp comp type is MANUAL. R/W Float 8
var_TB82_temp_auto_sol 4024 Auto TC option This is valid when temp comp type is Automatic. The Automatic Temperature Compensation option applies an algorithm that adjusts for the temperature effect of a solute. The available options are dependent upon the current SENSOR_GROUP. Sensor Group A: Std KCl, TC Coeff, NaOH, NaCl, HCl, H2SO4, User Defined. Sensor Group B: Std KCl, TC Coeff, User Defined. Sensor Group C: Std KCl, TC Coeff, Pure H2O, User Defined. R/W Enum 8
var_TB82_temp_pure_h2o 4025 Auto TC pure H2O options This is valid when temp-comp type is Automatic and Auto TC option is Pure H2O. This parameter provides Pure H2O option selection for temp-comp. This selection is restricted to Sensor Group C. R/W Enum 8
var_TB82_tc_coef 4026 Temp comp coeff Temperature Compensation Coefficient: This is valid when tem-comp type is Automatic and Auto TC option is TC-coeff. The Temp Coeff is applied as percent of change of conductivity from a reference temp per deg C. Valid range is 0 to 9.99% per deg C. R/W Float 8
var_TB82_var_ref_temp 4027 Variable ref temp Variable Reference Temperature provides the ability to use use any temp as the reference temp used to determine the temp-compensated conductivity value (i.e., Primary value). R/W Float 8
var_TB82_user_defined_tc_t1 404B Temp 1 Temp 1 of user defined temperature coefficient. First end point of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t2 404C Temp 2 Temp 2 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t3 404D Temp 3 Temp 3 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t4 404E Temp 4 Temp 4 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t5 404F Temp 5 Temp 5 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t6 4050 Temp 6 Temp 6 of user defined temperature coefficient. Last end point of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k1 4051 K1/Kref Ratio of uncompensated conductivity at Temp 1 to conductivity at reference temperature (K1/Kref). First endpoint of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k2 4052 K2/Kref Ratio of uncompensated conductivity at Temp 2 to conductivity at reference temperature (K2/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k3 4053 K3/Kref Ratio of uncompensated conductivity at Temp 3 to conductivity at reference temperature (K3/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k4 4054 K4/Kref Ratio of uncompensated conductivity at Temp 4 to conductivity at reference temperature (K4/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k5 4055 K5/Kref Ratio of uncompensated conductivity at Temp 5 to conductivity at reference temperature (K5/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k6 4056 K6/Kref Ratio of uncompensated conductivity at Temp 6 to conductivity at reference temperature (K6/Kref). Last endpoint of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_conc_x1 4015 x1 Cond x1 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x2 4017 x2 Cond x2 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x3 4019 x3 Cond x3 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x4 401B x4 Cond x4 Conductivity point of the user defined concentration curve. R/W Float 8
Name ID Label Description Type Access Class