Loading…
Name ID Label Description Type Access Class
upperRange_value 00EA PV URV URV (ｱｯﾊﾟｰ ﾚﾝｼﾞ ﾊﾞﾘｭｰ) - ｱﾅﾛｸﾞ出力に対するｵﾍﾟﾚｰｼｮﾝ上のｴﾝﾄﾞ ﾎﾟｲﾝﾄのことで, ﾊﾟｰｾﾝﾄ ﾚﾝｼﾞの 100% に相当します。 R/W Float 32
lowerRange_value 00EB PV LRV LRV (ﾛｳｱｰ ﾚﾝｼﾞ ﾊﾞﾘｭｰ) - ｱﾅﾛｸﾞ出力に対するｵﾍﾟﾚｰｼｮﾝ上のｴﾝﾄﾞ ﾎﾟｲﾝﾄのことで, ﾊﾟｰｾﾝﾄ ﾚﾝｼﾞの 0% に相当します。 R/W Float 32
pv_Value 4036 PV R Float 10
pv_Units 4037 PV ｾﾝｻｰ単位 ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 R/W Enum 8
pv_USL 400B USL USL 値 (ｱｯﾊﾟｰ ｾﾝｻｰ ﾘﾐｯﾄ値) - Upper ﾚﾝｼﾞ値で使用できる最高の値を示しています。 R Float 8
pv_LSL 400A LSL USL 値 (ｱｯﾊﾟｰ ｾﾝｻｰ ﾘﾐｯﾄ値) - Upper ﾚﾝｼﾞ値で使用できる最高の値を示しています。 R Float 8
pv_Min_Span 400C Minimum Span 最小ｽﾊﾟﾝ - Lower ﾚﾝｼﾞ値から Upper ﾚﾝｼﾞ値までの使用できる最小幅を示しています。 R Float 8
pv_Damp 4038 Damping ﾀﾞﾝﾋﾟﾝｸﾞ - ﾀﾞﾝﾋﾟﾝｸﾞ ﾀｲﾑはﾃﾞｼﾞﾀﾙ表示とｱﾅﾛｸﾞ出力に関係するｱﾅﾛｸﾞ ﾊﾞﾘｭｰの両方に作用します。単位は常に秒で表します。 R/W Float 8
pv_SSN 4007 ｾﾝｻｰ S/N ｾﾝｻｰ ｼﾘｱﾙ ﾅﾝﾊﾞｰ - ﾃﾞｼﾞﾀﾙ値表示又はﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙを主に導出するｾﾝｻｰを一意に識別します。 R/W Unsigned 2048
analog_value 400D AO AO (ｱﾅﾛｸﾞ出力値) - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでのﾃﾞｼﾞﾀﾙ値で表示します。 R/W Float 66
fail_mode 400E AO ｱﾗｰﾑ ﾀｲﾌﾟ AO ｱﾗｰﾑ ﾀｲﾌﾟ (ｱﾅﾛｸﾞ出力ｱﾗｰﾑ ﾀｲﾌﾟ) - ｱﾅﾛｸﾞ出力がﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙに追従できないときにｱﾅﾛｸﾞ出力をどうするか定義します。Note - ﾃﾞｼﾞﾀﾙ値表示には影響しません。 R Enum 64
transfer_function 1F84 伝送ﾀｲﾌﾟ 伝送ﾀｲﾌﾟ - ﾌｨｰﾙﾄﾞ機器のｱﾅﾛｸﾞ出力とﾊﾟｰｾﾝﾄ ﾚﾝｼﾞの伝送ﾀｲﾌﾟを定義します。これはﾃﾞｼﾞﾀﾙ値表示には影響しません。 R Enum 32
percent_range 4039 PV % ﾚﾝｼﾞ % ﾚﾝｼﾞ - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでの Lower/Upper ﾚﾝｼﾞ値によるﾃﾞｼﾞﾀﾙ値表示です。単位は常にﾊﾟｰｾﾝﾄです。 R Float 34
sv_Value 403A Temp (SV) Secondary variable temperature R Float 10
sv_Units 403B Temp (SV) unit Secondary variable temperature engineering units R/W Enum 8
tv_Value 403C Cond/Conc (TV) Device Tertiary Variable (TV). TV = Concentration value when PV type = Conductivity. TV = Conductivity value when PV type = Concentration. R Float 10
tv_Units 403D Cond/Conc (TV) unit Tertiary variable conductivity or concentration engineering units R/W Enum 8
qv_Value 403E Uncomp Cond (QV) Quaternary variable temp-uncompensated conductivity R Float 10
qv_Units 403F Uncomp Cond (QV) unit Quaternary variable uncompensated conductivity engineering units R/W Enum 8
var_TB82_primary_value_type 400F PV type Primary Value (PV) type selection. When PV type = Conductivity, PV value = Conductivity and TV value = Concentration. When PV type = Concentration, PV value = Concentration and TV value = Conductivity. R/W Enum 8
var_TB82_sensor_group 4010 Snsr group Three sensor groups are applied and defined by the sensor cell constant: A, B and C. R/W Enum 8
var_TB82_sensor_diagnostics 4021 Snsr diagnostics Sensor Diagnostics selection determines whether certain sensor diagnostics are enabled or disabled R/W Enum 8
var_TB82_solution 4011 Solution type The solution type defines the solute algorithm used for concentration configurations. Both predefined and user-defined concentration configurations are available. The available solution types are dependent upon the current SENSOR_GROUP. Sensor Group A: 0 to 15% NaOH, 0 to 20% NaCl, 0 to 18% HCl, 0 to 20% H2SO4, User Defined. Sensor Group B: User Defined. Sensor Group C: User Defined. R/W Enum 8
var_TB82_usrdef_secondary 4012 Concen curve name This is a six character text name for the concentration curve. It could be modified in user-defined concentration configuration R/W ASCII 2048
var_TB82_usrdef_unit 4013 User def conc unit Engineering units for user defined concentration curve This will be used as the concentration value units when a user defined concentration curve is selected. R/W Enum 8
var_TB82_concentration_range 4014 Concen range The concentration range can be set when the solution type is set to user defined. For all other solution types it is read-only R/W Enum 8
var_TB82_temp_sensor_type 4022 Temp snsr type Temperature sensor type R/W Enum 8
var_TB82_temp_comp_type 4023 Temp comp type Determines the type of Temperature Compensation algorithm applied to the Primary Value R/W Enum 8
var_TB82_manual_temp_setpoint_unit 4043 Manual temp unit R/W Enum 8
var_TB82_manual_temp_setpoint 4028 Manual Temp. Manual Temperature value is used in the temp comp algorithm when the temp comp type is MANUAL. R/W Float 8
var_TB82_temp_auto_sol 4024 Auto TC option This is valid when temp comp type is Automatic. The Automatic Temperature Compensation option applies an algorithm that adjusts for the temperature effect of a solute. The available options are dependent upon the current SENSOR_GROUP. Sensor Group A: Std KCl, TC Coeff, NaOH, NaCl, HCl, H2SO4, User Defined. Sensor Group B: Std KCl, TC Coeff, User Defined. Sensor Group C: Std KCl, TC Coeff, Pure H2O, User Defined. R/W Enum 8
var_TB82_temp_pure_h2o 4025 Auto TC pure H2O options This is valid when temp-comp type is Automatic and Auto TC option is Pure H2O. This parameter provides Pure H2O option selection for temp-comp. This selection is restricted to Sensor Group C. R/W Enum 8
var_TB82_tc_coef 4026 Temp comp coeff Temperature Compensation Coefficient: This is valid when tem-comp type is Automatic and Auto TC option is TC-coeff. The Temp Coeff is applied as percent of change of conductivity from a reference temp per deg C. Valid range is 0 to 9.99% per deg C. R/W Float 8
var_TB82_var_ref_temp 4027 Variable ref temp Variable Reference Temperature provides the ability to use use any temp as the reference temp used to determine the temp-compensated conductivity value (i.e., Primary value). R/W Float 8
var_TB82_user_defined_tc_t1 404B Temp 1 Temp 1 of user defined temperature coefficient. First end point of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t2 404C Temp 2 Temp 2 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t3 404D Temp 3 Temp 3 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t4 404E Temp 4 Temp 4 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t5 404F Temp 5 Temp 5 of user defined temperature coefficient. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_t6 4050 Temp 6 Temp 6 of user defined temperature coefficient. Last end point of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k1 4051 K1/Kref Ratio of uncompensated conductivity at Temp 1 to conductivity at reference temperature (K1/Kref). First endpoint of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k2 4052 K2/Kref Ratio of uncompensated conductivity at Temp 2 to conductivity at reference temperature (K2/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k3 4053 K3/Kref Ratio of uncompensated conductivity at Temp 3 to conductivity at reference temperature (K3/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k4 4054 K4/Kref Ratio of uncompensated conductivity at Temp 4 to conductivity at reference temperature (K4/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k5 4055 K5/Kref Ratio of uncompensated conductivity at Temp 5 to conductivity at reference temperature (K5/Kref). Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_tc_k6 4056 K6/Kref Ratio of uncompensated conductivity at Temp 6 to conductivity at reference temperature (K6/Kref). Last endpoint of the curve. Valid only when Auto-TC option is user-defined R/W Float 8
var_TB82_user_defined_conc_x1 4015 x1 Cond x1 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x2 4017 x2 Cond x2 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x3 4019 x3 Cond x3 Conductivity point of the user defined concentration curve. R/W Float 8
var_TB82_user_defined_conc_x4 401B x4 Cond x4 Conductivity point of the user defined concentration curve. R/W Float 8
Name ID Label Description Type Access Class