Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
y4 | 400C | Y4 Point | Y4 - Part of an (X,Y) pair defining one of the seven points on a six segment user defined curve. (X0,Y0) and (X6,Y6) are the fixed endpoints. The curve defines an application specific relationship between the input pressure and the output value. | R/W | Float | 64 |
y5 | 400D | Y5 Point | Y5 - Part of an (X,Y) pair defining one of the seven points on a six segment user defined curve. (X0,Y0) and (X6,Y6) are the fixed endpoints. The curve defines an application specific relationship between the input pressure and the output value. | R/W | Float | 64 |
xmtr_lcd_select | 4028 | LCD Configuration | LCD Configuration - Defines what information the optional LCD indicator will display. The available display options are: Secondary Output (user defined value), PV Applied Pressure (primary input), PV % of range, or Pressure Sensor (Cell) Temperature. | W | Enum | 256 |
mfg_sn | 402A | Mfg S/N | Manufacturing Serial Number - Device serial number assigned during the manufacturing process. | R | ASCII | 2048 |
mfg_date | 402B | Mfg Date | Date of Manufacture - Date when the assembly and testing of the transmitter was completed. Format is mmddyyyy. | R | ASCII | 2048 |
mfg_loc | 402C | Mfg Location | Manufacturing Location - Manufacturer's identification code indicating the factory where the transmitter was built. | R | ASCII | 2048 |
nomenclature | 402E | Nomenclature | Product Nomenclature - Manufacturer part number for the transmitter. | R | ASCII | 2048 |
max_cell_temp | 4030 | Max Cell Temp | Maximum Cell Temperature - The highest temperature the pressure sensor (cell) has been exposed to during its life. | R | Float | 2048 |
max_elect_temp | 4031 | Max Elec Temp | Maximum Electronics Temperature - The highest temperature the transmitter electronics has been exposed to during its life. | R | Float | 2048 |
lo_cal_point | 4032 | Lower Cal Point | Lower Calibration Point - The lower pressure point in the two point calibration process. The calibration point must be within the range of the transmitter and must be lower than the Upper Calibration Point pressure. | W | Float | 8 |
Name | ID | Label | Description | Type | Access | Class |