Loading…
Loading…
变量名称: Log_EventItem
变量ID: 0x41D8
变量标签: Logbook EventID
变量描述:
变量处理: 读
变量分类: InputBlock
变量长度: 2
变量数据类型: 枚举
变量枚举值 | 变量枚举文本 |
---|---|
0x0001 | Power on |
0x0002 | SYSTEM ERROR |
0x004A | EEPROM error (CPU) |
0x004B | Checksum error (CPU) |
0x004C | EEPROM error |
0x004D | Checksum error |
0x0003 | Logbook erased |
0x0004 | Logbook saved |
0x0005 | Initialization |
0x0006 | Operator ID |
0x0007 | Temp offset |
0x0008 | Set hold last |
0x0009 | Set hold fixed |
0x000A | User Settings saved |
0x000B | Factory Settings load |
0x000C | User Settings load |
0x000D | Interval time |
0x000E | Wash time |
0x000F | Recovery time |
0x0010 | Damping time |
0x0011 | Hold fixed |
0x0012 | Set Burn off |
0x0013 | Set Burn low |
0x0014 | Set Burn high |
0x0015 | Set mA type output |
0x0016 | Set mA type simulate |
0x0017 | Set mA func linear |
0x0018 | Set mA func table |
0x0019 | linear 0% |
0x001A | linear 100% |
0x0047 | Sensor washed by hand |
0x0048 | Module replaced |
0x0049 | Sensor replaced |
0xEA60 | |
0x001B | pH zero |
0x001C | pH slope |
0x001D | ITP |
0x001E | Resp after cal |
0x001F | Imp2 after cal |
0x0020 | ORP zero |
0x0021 | ORP slope |
0x2711 | Err on: pH too high |
0x2712 | Err on: pH too low |
0x2713 | Err on: temp too high |
0x2714 | Err on: temp too low |
0x2715 | Err on: pH comp |
0x2716 | Err on: ORP comp |
0x2717 | Err on: wash response |
0x2718 | Err on: meas unstable |
0x2719 | Err on: ORP too high |
0x271A | Err on: ORP too low |
0x271B | Err on: rH too high |
0x271C | Err on: rH too low |
0x271D | Err on: imp1 too high |
0x271E | Err on: imp1 too low |
0x271F | Err on: imp2 too high |
0x2720 | Err on: imp2 too low |
0x2721 | Err on: matrix |
0x2722 | Err on: cal due |
0x2723 | Err on: eeprom |
0x2724 | Err on: checksum |
0x4E21 | Err off: pH too high |
0x4E22 | Err off: pH too low |
0x4E23 | Err off: temp too high |
0x4E24 | Err off: temp too low |
0x4E25 | Err off: pH comp |
0x4E26 | Err off: ORP comp |
0x4E27 | Err off: wash response |
0x4E28 | Err off: meas unstable |
0x4E29 | Err off: ORP too high |
0x4E2A | Err off: ORP too low |
0x4E2B | Err off: rH too high |
0x4E2C | Err off: rH too low |
0x4E2D | Err off: imp1 too high |
0x4E2E | Err off: imp1 too low |
0x4E2F | Err off: imp2 too high |
0x4E30 | Err off: imp2 too low |
0x4E31 | Err off: matrix |
0x4E32 | Err off: cal due |
0x4E33 | Err off: eeprom |
0x4E34 | Err off: checksum |
0x0022 | Temp coef |
0x002B | Temp coef |
0x0023 | Zero low limit |
0x0024 | Zero high limit |
0x0025 | Slope low limit |
0x0026 | Slope high limit |
0x0027 | Reference temp |
0x0028 | Stabilization time |
0x0029 | Imp2 low limit |
0x002A | Imp2 high limit |
0x002C | ORP zero high |
0x002D | ORP zero low |
0x002E | ORP slope high |
0x002F | ORP slope low |
0x0030 | Imp1low limit |
0x0031 | Imp1high limit |
0x0045 | Impedance2 |
变量显示格式:
变量编辑格式:
变量单位:
变量最大值: N/A
变量最小值: N/A
变量读取命令列表
命令号 | 命令ID | 命令名称 |
---|---|---|
134 | 4273 | read_logbook |
变量写入命令列表
无