Variable Name: level_offset

Variable ID: 0x401F

Variable Label: Offset

Variable Help: Offset is a parameter which may be used to compensate for an un-measureable area below a probe OR to align the measurement of the MT5xxx with another device. The value entered in the Offset will be Added to or subtracted from the LVL indication on the main display as well as the output signal. Example: If the end of the probe were 4 inches off the bottom of the tank, the OFFSSET would be 4 inches. If the actual Measured Level were 21 inches after entering the OFFSET, the local indicator would indicate 25 inches (21 +4) and the output signal would indicate a level of 25 inches.

Variable Handling: R/W

Variable Class: Device

Variable Size: 4

Variable DataType: Float

Variable Display Format:

Variable Edit Format:

Variable Unit:

Variable Max:

Variable Min:

Variable Read Command List

Command Number	Command ID	Command Name
151	4075	read_basic_device_setup

Variable Write Command List

Command Number	Command ID	Command Name
155	4079	write_offset