Loading…

Variable Name: diagnosisConditionDetailsCodes45_2

Variable ID: 0x4288

Variable Label: Ext. Diagnostics 3

Variable Help:

Variable Handling: R

Variable Class: Dynamic | Diagnostic

Variable Size: 1

Variable DataType: Enum

Variable Enum Value Variable Enum Text
0x0000 Data in simulation mode
0x0001 Alarm in simulation mode
0x0002 Electronics Non-volatile memory failure
0x0003 Sensor NV memory write failure
0x0004 Electronics NV memory write failure
0x0005 Replace sensor to electronics blocked
0x0006 Replace required sensor to electronics blocked
0x0007 Replace required both directions enabled
0x0008 Safety function flow error
0x0009 HMI validation test failure
0x000A Electronics temperature too low
0x000B Electronics temperature too high
0x000C Invalid input value
0x000D Fail-safe low
0x000E Span limit high
0x000F Span limit low
0x0010 Hardware limit low
0x0011 Hardware limit high
0x0012 System limit low
0x0013 System in fixed curent mode
0x0014 Power supply too low (<10.5 VDC)
0x0015 Power supply too high (>40.5 VDC)
0x0016 Current readback failed high
0x0017 Current readback failed low
0x0018 Electronics RAM failure
0x0019 Electronics ROM failure
0x001A Ambient temperature too high
0x001B Ambient temperature too low
0x001C Illegal memory access failure
0x001D Memory test failure
0x001E Electronics self-test failure
0x001F Level sensor failure
0x0020 Level sensor warning
0x0021 Level out of limits
0x0022 Interface out of limits
0x0023 Level sensor trim needed
0x0024 Temperature sensor failure
0x0025 Temperature sensor out of limits
0x0026 Temperature sensor trim needed
0x0027 Sensor Non-volatile write active
0x0028 Sensor Non-volatile write failure
0x0029 Sensor Non-volatile failure
0x002A Sensor Non-volatile busy
0x002B Sensor communication error
0x002C Device reset required
0x002D PV value out of range
0x002E Level low low alarm
0x002F Level low warning
0x0030 Level high warning
0x0031 Level high high alarm
0x0032 Ullage low low alarm
0x0033 Ullage low warning
0x0034 Ullage high warning
0x0035 Ullage high high alarm
0x0036 Interface low low alarm
0x0037 Interface low warning
0x0038 Interface high warning
0x0039 Interface high high alarm
0x003A Level in simulation mode
0x003B Interface in simulation mode
0x003C Ullage in simulation mode
0x003D Temperature in simulation mode
0x003E Volume-Level in simulation mode
0x003F Volume-Interface in simulation mode
0x0040 Flow in simulation mode
0x0041 Temperature low low alarm
0x0042 Temperature low warning
0x0043 Temperature high warning
0x0044 Temperature high high alarm
0x0045 Temperature sensor out of limits
0x00FF OFF

Variable Display Format:

Variable Edit Format:

Variable Unit:

Variable Max: N/A

Variable Min: N/A

Variable Read Command List

Command Number Command ID Command Name
199 428E read_diagnosis_condition_details

Variable Write Command List

None