Loading…
Loading…
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |
|---|---|---|---|---|---|
| self_test | 402B | 自测试 | Self-test - Transmitter self-test in progress. The analog output is frozen. Recognised failures are displayed. | msrc_UNKNOWN | 详细信息 |
| master_test | 402C | Transmitter reset | Transmitter reset - The transmitter is restarted. Non-permanent stored data are lost. Self-test is subsequently conducted. | msrc_UNKNOWN | 详细信息 |
| wire_trim | 402D | Lead balancing | Lead balancing - The resistance of the connection lines to sensor can be compensated for. This step is only necessary for measurement resistors in 2- or 3-wire circuitry. | msrc_UNKNOWN | 详细信息 |
| reset_parameter | 402E | Data reset | Data reset - All data, which were not made permanent are reset to their original values. This allows the old data to be restored when a parameter setting is interrupted. | msrc_UNKNOWN | 详细信息 |
| configure_sensor | 4033 | Sensor config. | Input parameter - the parameters for wiring to the input (sensor type, etc.) can be fixed via the function. | msrc_UNKNOWN | 详细信息 |
| select_unit | 4034 | Process unit | 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 | msrc_UNKNOWN | 详细信息 |
| test_range | 4035 | 中止返回正常 | msrc_UNKNOWN | 详细信息 | |
| configure_output | 4038 | Output config. | Configuration of analog output - The setting determines the behaviour of the output in case of failure. | msrc_UNKNOWN | 详细信息 |
| send_data | 4039 | Send data | msrc_UNKNOWN | 详细信息 | |
| return_to_normal | 1016 | 中止返回正常 | msrc_UNKNOWN | 详细信息 | |
| burn_eeprom | 100C | 烧录EEPROM | 烧录电可擦除只读存储器——现场设备将随机存取存储器中数据复制到电可擦除只读存储器的操作，主机可做修改。 | msrc_UNKNOWN | 详细信息 |
| 名称 | ID | 标签 | 描述 | 类型 | 源代码 |