| 0 |
YTA |
| 1 |
Output Too Low |
| 2 |
Output Too High |
| 3 |
Sensor1 Failure |
| 4 |
Sensor2 Failure |
| 5 |
S1 Signal Error |
| 6 |
S2 Signal Error |
| 7 |
Amb Temp Low |
| 8 |
Amb Temp High |
| 9 |
Snsr Bkup Start |
| 10 |
Illegal PV Map |
| 11 |
Term Sns Failure |
| 12 |
EEPROM Failure |
| 13 |
CPU Failure |
| 14 |
AD Conv Failure |
| 15 |
LRV Too Low |
| 16 |
LRV Too High |
| 17 |
URV Too Low |
| 18 |
URV Too High |
| 19 |
Span Too Small |
| 20 |
Snsr1 Temp Low |
| 21 |
Snsr1 Temp High |
| 22 |
Snsr2 Temp Low |
| 23 |
Snsr2 Temp High |
| 24 |
Illegal SV Map |
| 25 |
Illegal TV Map |
| 26 |
Illegal 4V Map |
| 27 |
Fixed Current |
| 28 |
Snsr Backup Set |
| 29 |
Soft Not Protect |
| 30 |
Last Sum Area |
| 31 |
Hard Not Protect |
| 32 |
Dynamic var |
| 33 |
Sensor 1 Measurement |
| 34 |
Sensor 2 Measurement |
| 35 |
Differential Measurement |
| 36 |
Avg |
| 37 |
Averaging Measurement |
| 38 |
Snsr1-Term |
| 39 |
Sensor 1 Measurement based Terminal temperature |
| 40 |
Snsr2-Term |
| 41 |
Sensor 2 Measurement based Terminal temperature |
| 42 |
Term |
| 43 |
Terminal Temperature Measurement |
| 44 |
Sensor 1 Measurement- Measurement of input channel 1. |
| 45 |
Sensor 2 Measurement- Measurement of input channel 2. |
| 46 |
Differential Measurement- Measurement derived by computing the difference between two Sensor inputs. |
| 47 |
Averaging Measurement- Measurement derived by computing the averaging between two Sensor inputs. |
| 48 |
Sensor1-Term Measurement- Sensor 1 Measurement derived by computing the difference based Terminal temperature. |
| 49 |
Sensor2-Term Measurement- Sensor 2 Measurement derived by computing the difference based Terminal temperature. |
| 50 |
Terminal Measurement- Measurement of Terminal temperature. |
| 51 |
Sensor 2 inp |
| 52 |
6.0f |
| 53 |
.3f |
| 54 |
.2f |
| 55 |
Avg unit |
| 56 |
Snsr1-Term Unit |
| 57 |
Snsr2-Term Unit |
| 58 |
Term Unit |
| 59 |
8u |
| 60 |
Term snsr s/n |
| 61 |
Avg USL |
| 62 |
Snsr1-Term USL |
| 63 |
Snsr2-Term USL |
| 64 |
Term USL |
| 65 |
Avg LSL |
| 66 |
Snsr1-Term LSL |
| 67 |
Snsr2-Term LSL |
| 68 |
Term LSL |
| 69 |
Avg min span |
| 70 |
Snsr1-Term min span |
| 71 |
Snsr2-Term min span |
| 72 |
Term min span |
| 73 |
.0f |
| 74 |
2.0f |
| 75 |
Snsr2 damp |
| 76 |
Avg damp |
| 77 |
Snsr1-Term damp |
| 78 |
Snsr2-Term damp |
| 79 |
Term damp |
| 80 |
Sensor Variables |
| 81 |
Which sensor |
| 82 |
Snsr1 Type |
| 83 |
Type-B (IEC584) |
| 84 |
Type-W3 (ASTM E988) |
| 85 |
Type-W5 (ASTM E988) |
| 86 |
Type-E (IEC584) |
| 87 |
Type-J (IEC584) |
| 88 |
Type-K (IEC584) |
| 89 |
Type-L (DIN43710) |
| 90 |
Type-N (IEC584) |
| 91 |
Type-R (IEC584) |
| 92 |
Type-S (IEC584) |
| 93 |
Type-T (IEC584) |
| 94 |
Type-U (DIN43710) |
| 95 |
PT100 (IEC751) |
| 96 |
PT200 (IEC751) |
| 97 |
PT500 (IEC751) |
| 98 |
JPt100 (JIS) |
| 99 |
Cu (SAMA RC21-4) |
| 100 |
Non-Standard1 |
| 101 |
Non-Standard2 |
| 102 |
Non-Connection |
| 103 |
Snsr2 Type |
| 104 |
Snsr1 Wire |
| 105 |
Snsr2 Wire |
| 106 |
Snsr1 Trim Act |
| 107 |
Clear |
| 108 |
Snsr2 Trim Act |
| 109 |
Snsr1 Lower trim |
| 110 |
Snsr1 Upper trim |
| 111 |
Snsr2 Lower trim |
| 112 |
Snsr2 Upper trim |
| 113 |
Snsr1 Match Enbl |
| 114 |
Snsr2 Match Enbl |
| 115 |
Snsr1 Match R0 |
| 116 |
Snsr1 Match A |
| 117 |
.6E |
| 118 |
14.7E |
| 119 |
Snsr1 Match B |
| 120 |
Snsr1 Match C |
| 121 |
Snsr2 Match R0 |
| 122 |
Snsr2 Match A |
| 123 |
Snsr2 Match B |
| 124 |
Snsr2 Match C |
| 125 |
EEPROM initialize |
| 126 |
Completion |
| 127 |
Not complete |
| 128 |
Unit mode |
| 129 |
degF degR degC Kelvin |
| 130 |
degC Kelvin |
| 131 |
Com. Protocol |
| 132 |
HART |
| 133 |
BRAIN |
| 134 |
Max snsrs |
| 135 |
1-input |
| 136 |
2-input |
| 137 |
Spcl snsr No1 Inst |
| 138 |
Spcl snsr No2 Inst |
| 139 |
Snsr1 Matching |
| 140 |
Snsr2 Matching |
| 141 |
S2 4wire |
| 142 |
Spcl snsr No1 Wire |
| 143 |
3-4 Wire |
| 144 |
Spcl snsr No2 Wire |
| 145 |
Accuracy type |
| 146 |
Meter installation |
| 147 |
YTA110 |
| 148 |
YTA310 |
| 149 |
YTA320 |
| 150 |
Prcs var Valid cod |
| 151 |
PV |
| 152 |
PV SV |
| 153 |
PV TV |
| 154 |
PV SV TV |
| 155 |
PV 4V |
| 156 |
PV SV 4V |
| 157 |
PV TV 4V |
| 158 |
PV SV TV 4V |
| 159 |
Snsr trim |
| 160 |
Both Off |
| 161 |
S1 Only |
| 162 |
S2 Only |
| 163 |
Both On |
| 164 |
Snsr1 menu ctrl |
| 165 |
Inhibit |
| 166 |
Show |
| 167 |
Snsr2 menu ctrl |
| 168 |
Sensor Backup- It operates under setting PV to Snsr1 and SV to Snsr2. |
| 169 |
Snsr Bkup |
| 170 |
Bkup State |
| 171 |
Waiting |
| 172 |
Snsr burnout type |
| 173 |
User(mA) |
| 174 |
User(%) |
| 175 |
Snsr burnout val |
| 176 |
Diff direction |
| 177 |
Snsr1-Snsr2 |
| 178 |
Snsr2-Snsr1 |
| 179 |
PV damp point |
| 180 |
2d |
| 181 |
Process Disp |
| 182 |
SV |
| 183 |
TV |
| 184 |
4V |
| 185 |
PV,SV |
| 186 |
PV,SV,TV |
| 187 |
PV,SV,TV,4V |
| 188 |
%/mA Disp |
| 189 |
mA,% |
| 190 |
Err-No Disp |
| 191 |
Bar graph |
| 192 |
Matrix Disp |
| 193 |
Process |
| 194 |
Type |
| 195 |
Wire |
| 196 |
Process,Type |
| 197 |
Type,Wire |
| 198 |
Disp Update |
| 199 |
Fast |
| 200 |
Slow |
| 201 |
Tag extension part |
| 202 |
Tag Ex |
| 203 |
Long Tag |
| 204 |
PV Max |
| 205 |
PV Min |
| 206 |
SV Max |
| 207 |
SV Min |
| 208 |
TV Max |
| 209 |
TV Min |
| 210 |
4V Max |
| 211 |
4V Min |
| 212 |
Tm Max |
| 213 |
Tm Min |
| 214 |
Error logs |
| 215 |
Newest |
| 216 |
Newest Error Log |
| 217 |
2nd newer |
| 218 |
2nd newer Error Log |
| 219 |
3rd newer |
| 220 |
3rd newer Error Log |
| 221 |
Oldest |
| 222 |
Oldest Error Log |
| 223 |
Which error log |
| 224 |
Log1-A |
| 225 |
Log1-B |
| 226 |
Log2-A |
| 227 |
Log2-B |
| 228 |
Log3-A |
| 229 |
Log3-B |
| 230 |
Log4-A |
| 231 |
Log4-B |
| 232 |
Warn enbl group1 |
| 233 |
Warn enbl group2 |
| 234 |
Warn enbl group3 |
| 235 |
Warn enbl group4 |
| 236 |
Spcl snsr No1 Info |
| 237 |
Spcl snsr No2 Info |
| 238 |
Power Check |
| 239 |
Operate Time |
| 240 |
.1f |
| 241 |
PV unit |
| 242 |
PV Damp |
| 243 |
CJC Select |
| 244 |
Internal CJC |
| 245 |
Constant CJC |
| 246 |
CNST CJC Temp |
| 247 |
Enable wrt passwd |
| 248 |
New password |
| 249 |
Software seal |
| 250 |
Break |
| 251 |
Keep |
| 252 |
Self Test- Commands the YTA electronics to perform a selftest. Reports any errors that occured. |
| 253 |
Master Reset- Commands the YTA electronics to reset and perform a selftest. Reports any errors that occured. |
| 254 |
Variable map |
| 255 |
Max/Min log Clear |
| 256 |
Exit log restart |
| 257 |
Error log Clear |
| 258 |
Error log view |
| 259 |
S1 Trim Zero/Gain |
| 260 |
S2 Trim Zero/Gain |
| 261 |
D/A Clr to Default |
| 262 |
Exit clr to Def. |
| 263 |
Bkup Return Snsr1 |
| 264 |
Snsr1 Match coefs |
| 265 |
Snsr2 Match coefs |
| 266 |
PV max/min log |
| 267 |
SV max/min log |
| 268 |
TV max/min log |
| 269 |
4V max/min log |
| 270 |
Term max/min log |
| 271 |
Enable wrt 10min |
| 272 |
Aborting |
| 273 |
Exiting |
| 274 |
Variable view |
| 275 |
Variable setting |
| 276 |
Unit&Damp |
| 277 |
PV Unit&Damp |
| 278 |
SV Unit&Damp |
| 279 |
TV Unit&Damp |
| 280 |
4V Unit&Damp |
| 281 |
Max/Min log |
| 282 |
Set warning enbl |
| 283 |
Sensor Trim |
| 284 |
Snsr 1 inp trim |
| 285 |
Snsr 2 inp trim |
| 286 |
AO D/A Trim |
| 287 |
Error log |
| 288 |
Power monitoring |
| 289 |
Snsr 1 config |
| 290 |
Snsr 2 config |
| 291 |
Process sensor 1 |
| 292 |
Snsr 1 Info. |
| 293 |
Process sensor 2 |
| 294 |
Snsr 2 Info. |
| 295 |
Term temp sensor |
| 296 |
Term temp Limits |
| 297 |
Snsr Backup |
| 298 |
Snsr burnout |
| 299 |
Meter output |
| 300 |
Display select |
| 301 |
Sensor 1 Review |
| 302 |
Sensor 2 Review |
| 303 |
Term temp Review |
| 304 |
Out&Meter Review |
| 305 |
Device Review |
| 306 |
Upload variables |
| 307 |
Wrt protect menu |
| 308 |
FMU860 |
| 309 |
DT |
| 310 |
DVC |
| 311 |
FCX |
| 312 |
AS800 |
| 313 |
340T |
| 314 |
340C |
| 315 |
344 |
| 316 |
Siemens Micro K |
| 317 |
SITRANS L |
| 318 |
SIPAN PH |
| 319 |
SITRANS P |
| 320 |
75SMT |
| 321 |
UNIDELTA |
| 322 |
8320 |
| 323 |
SX5100 |
| 324 |
TSV175 |
| 325 |
DMU |
| 326 |
3780 |
| 327 |
BM70 |
| 328 |
low |
| 329 |
high |
| 330 |
tmp_av |
| 331 |
Self test in progress please wait |
| 332 |
Device maybe stuck in selftest. |
| 333 |
Self Test OK |
| 334 |
It will reset the master CPU, OK ? |
| 335 |
Exit;Execute |
| 336 |
WARN-Loop should be removed from automatic control |
| 337 |
Master Reset in progress please wait |
| 338 |
Device maybe stuck in master reset. |
| 339 |
Master Reset OK |
| 340 |
PV is %{0}
SV is %{1}
TV is %{2}
4V is %{3}
Press 'OK' to change them. |
| 341 |
PV is |
| 342 |
SV is |
| 343 |
TV is |
| 344 |
4V is |
| 345 |
PV is %{0}
SV is %{1}
TV is %{2}
4V is %{3}
Pressing 'OK' will send them. |
| 346 |
Do you wish to re-send ? |
| 347 |
yes;no |
| 348 |
Snsr1 type |
| 349 |
Snsr2 type |
| 350 |
Execute OK ? |
| 351 |
Performing log clear |
| 352 |
Show the: |
| 353 |
Log1(newest);Log2;Log3;Log4(oldest);Exit |
| 354 |
No error |
| 355 |
Trim activate is not On. You should set it on. |
| 356 |
Connect Snsr1 Zero ref input in the range:
-10 to +40 mV
(Recommended value:
0 mV) |
| 357 |
Connect Snsr1 Zero ref input in the range:
-10 to +100 mV
(Recommended value:
0 mV) |
| 358 |
Connect Snsr1 Zero ref input in the range:
0 to 500 ohm
(Recommended value:
40 ohm) |
| 359 |
Connect Snsr1 Zero ref input in the range:
0 to 2000 ohm
(Recommended value:
40 ohm) |
| 360 |
Connect Snsr1 Zero ref input in the special range. |
| 361 |
Press OK when ref input is stable. |
| 362 |
Enter Snsr1 Zero trim ref input value (mV): |
| 363 |
Enter Snsr1 Zero trim ref input value (ohm): |
| 364 |
Enter Snsr1 Zero trim ref input value (mV or ohm): |
| 365 |
Connect Snsr1 Gain ref input in the range:
-10 to +40 mV
(Recommended value:
25 mV) |
| 366 |
Connect Snsr1 Gain ref input in the range:
-10 to +100 mV
(Recommended value:
75 mV) |
| 367 |
Connect Snsr1 Gain ref input in the range:
0 to 500 ohm
(Recommended value:
330 ohm) |
| 368 |
Connect Snsr1 Gain ref input in the range:
0 to 2000 ohm
(Recommended value:
1600 ohm) |
| 369 |
Connect Snsr1 Gain ref input in the special range. |
| 370 |
Enter Snsr1 Gain trim ref input value (mV): |
| 371 |
Enter Snsr1 Gain trim ref input value (ohm): |
| 372 |
Enter Snsr1 Gain trim ref input value (mV or ohm): |
| 373 |
Trim was not done |
| 374 |
Performing Sensor trim |
| 375 |
Connect Snsr2 Zero ref input in the range:
-10 to +40 mV
(Recommended value:
0 mV) |
| 376 |
Connect Snsr2 Zero ref input in the range:
-10 to +100 mV
(Recommended value:
0 mV) |
| 377 |
Connect Snsr2 Zero ref input in the range:
0 to 500 ohm
(Recommended value:
40 ohm) |
| 378 |
Connect Snsr2 Zero ref input in the range:
0 to 2000 ohm
(Recommended value:
40 ohm) |
| 379 |
Connect Snsr2 Zero ref input in the special range. |
| 380 |
Enter Snsr2 Zero trim ref input value (mV): |
| 381 |
Enter Snsr2 Zero trim ref input value (ohm): |
| 382 |
Enter Snsr2 Zero trim ref input value (mV or ohm): |
| 383 |
Connect Snsr2 Gain ref input in the range:
-10 to +40 mV
(Recommended value:
25 mV) |
| 384 |
Connect Snsr2 Gain ref input in the range:
-10 to +100 mV
(Recommended value:
75 mV) |
| 385 |
Connect Snsr2 Gain ref input in the range:
0 to 500 ohm
(Recommended value:
330 ohm) |
| 386 |
Connect Snsr2 Gain ref input in the range:
0 to 2000 ohm
(Recommended value:
1600 ohm) |
| 387 |
Connect Snsr2 Gain ref input in the special range. |
| 388 |
Enter Snsr2 Gain trim ref input value (mV): |
| 389 |
Enter Snsr2 Gain trim ref input value (ohm): |
| 390 |
Enter Snsr2 Gain trim ref input value (mV or ohm): |
| 391 |
Performing DAC clear to default |
| 392 |
Pressing 'OK' will return to Sensor1 operation. |
| 393 |
Choose Coefs type: |
| 394 |
A B C; alpha delta beta |
| 395 |
R0=%[15.6f]{R0}
A=%[15.6E]{A}
B=%[15.6E]{B}
C=%[15.6E]{C}
Press 'OK' to change them. |
| 396 |
R0=%[15.6f]{R0}
alpha=%[15.6E]{alpha}
delta=%[15.6E]{delta}
beta=%[15.6E]{beta}
Press 'OK' to change them. |
| 397 |
Enter R0 value |
| 398 |
Enter A value |
| 399 |
Enter B value |
| 400 |
Enter C value |
| 401 |
R0=%[15.6f]{R0}
A=%[15.6E]{A}
B=%[15.6E]{B}
C=%[15.6E]{C}
Pressing 'OK' will send them. |
| 402 |
R0 |
| 403 |
Enter alpha value |
| 404 |
alpha |
| 405 |
Enter delta value |
| 406 |
delta |
| 407 |
Enter beta value |
| 408 |
beta |
| 409 |
R0=%[15.6f]{R0}
alpha=%[15.6E]{alpha}
delta=%[15.6E]{delta}
beta=%[15.6E]{beta}
Pressing 'OK' will send them. |
| 410 |
PV Max log value:
%{0} %{2}
PV Min log value:
%{1} %{2} |
| 411 |
SV Max log value:
%{0} %{2}
SV Min log value:
%{1} %{2} |
| 412 |
TV Max log value:
%{0} %{2}
TV Min log value:
%{1} %{2} |
| 413 |
4V Max log value:
%{0} %{2}
4V Min log value:
%{1} %{2} |
| 414 |
Term Max log val:
%{0} %{2}
Term Min log val:
%{1} %{2} |
| 415 |
Enter current password to enable to write for 10 minutes: |
| 416 |
Released the write protection for 10 minutes. |
| 417 |
If you wish to release completely, you have to change password to all of spaces. |
| 418 |
Enter new password to change state of write protect: |
| 419 |
Re-enter new password within 30 seconds: |
| 420 |
Aborting method due to last error |
| 421 |
Changed to new password. |
| 422 |
It changed the state of protection related password. |
| 423 |
'Snsr Bkup' now set to %{0} |
| 424 |
'Snsr1 Trim Act' now set to %{0} |
| 425 |
'Snsr2 Trim Act' now set to %{0} |
| 426 |
'Snsr1 Match Enbl' now set to %{0} |
| 427 |
'Snsr2 Match Enbl' now set to %{0} |
| 428 |
'CJC Select' now set to %{0} |
| 429 |
'CNST CJC Temp' now set to %{0} |