| 0 |
SC202 |
| 1 |
Warning: not applicable |
| 2 |
|
| 3 |
Burn is deactivated |
| 4 |
Soft-fail active |
| 5 |
HOLD is active |
| 6 |
Device in resistivity mode |
| 7 |
E1 Polarisation detected |
| 8 |
E2 Temp. coeff. incorrect |
| 9 |
E3 Calibration out of limits |
| 10 |
E4 Temp. matrix make no sense |
| 11 |
E5 Conductivity too high |
| 12 |
E6 Conductivity too low |
| 13 |
E7 Temperature sensor open |
| 14 |
E8 Temperature sensor shorted |
| 15 |
E9 Air set not possible |
| 16 |
E10 EEprom write failed |
| 17 |
E13 USP limit exceeded |
| 18 |
E15 Temperature adjust not possible |
| 19 |
E17 Output span too small |
| 20 |
E18 Table values not acceptable |
| 21 |
E19 Programmed values outside limits |
| 22 |
E20 Not initialized instrument |
| 23 |
E21 EEprom read error |
| 24 |
g |
| 25 |
dummy float |
| 26 |
dummy_3integer_value |
| 27 |
8u |
| 28 |
dummy_transfer_func |
| 29 |
The conductivity value that changes magnitude with respect to time with no user intervention. |
| 30 |
The resistivity value that changes magnitude with respect to time with no user intervention. |
| 31 |
µS |
| 32 |
mS |
| 33 |
MOhm |
| 34 |
kOhm |
| 35 |
5.3f |
| 36 |
5.2f |
| 37 |
5.1f |
| 38 |
4.0f |
| 39 |
Uncomp. |
| 40 |
Conductivity/resistivity value without temperature compensation. |
| 41 |
5.3e |
| 42 |
.1f |
| 43 |
Ref.Temp. |
| 44 |
Reference temperature used for temp. compensation |
| 45 |
TC1 perc |
| 46 |
Temperature compensation percentage 1 |
| 47 |
.2f |
| 48 |
4.2f |
| 49 |
TC2 perc |
| 50 |
Temperature compensation percentage 2 |
| 51 |
Conc. % |
| 52 |
Concentration percentage |
| 53 |
CC nom |
| 54 |
/cm |
| 55 |
Nominal value of cell constant |
| 56 |
.3f |
| 57 |
6.3f |
| 58 |
10.3e |
| 59 |
Hold fix |
| 60 |
mA-output value when Hold-Fixed selected |
| 61 |
4.1f |
| 62 |
Err.1 |
| 63 |
Error message configuration. Soft fail will give a flashing FAIL flag. Hard fail will give a steady FAIL flag and, when enabled an updated mA-output value |
| 64 |
Soft fail |
| 65 |
Hard fail |
| 66 |
Err.5 |
| 67 |
Err.6 |
| 68 |
Err.7 |
| 69 |
Err.8 |
| 70 |
Err.13 |
| 71 |
0% |
| 72 |
mA-output table 0% value (4.0 mA) |
| 73 |
5% |
| 74 |
mA-output table 5% value (4.8 mA) |
| 75 |
10% |
| 76 |
mA-output table 10% value (5.6 mA) |
| 77 |
15% |
| 78 |
mA-output table 15% value (6.4 mA) |
| 79 |
20% |
| 80 |
mA-output table 20% value (7.2 mA) |
| 81 |
25% |
| 82 |
mA-output table 25% value (8.0 mA) |
| 83 |
30% |
| 84 |
mA-output table 30% value (8.8 mA) |
| 85 |
35% |
| 86 |
mA-output table 35% value (9.6 mA) |
| 87 |
40% |
| 88 |
mA-output table 40% value (10.4 mA) |
| 89 |
45% |
| 90 |
mA-output table 45% value (11.2 mA) |
| 91 |
50% |
| 92 |
mA-output table 50% value (12.0 mA) |
| 93 |
55% |
| 94 |
mA-output table 55% value (12.8 mA) |
| 95 |
60% |
| 96 |
mA-output table 60% value (13.6 mA) |
| 97 |
65% |
| 98 |
mA-output table 65% value (14.4 mA) |
| 99 |
70% |
| 100 |
mA-output table 70% value (15.2 mA) |
| 101 |
75% |
| 102 |
mA-output table 75% value (16.0 mA) |
| 103 |
80% |
| 104 |
mA-output table 80% value (16.8 mA) |
| 105 |
85% |
| 106 |
mA-output table 85% value (17.6 mA) |
| 107 |
90% |
| 108 |
mA-output table 90% value (18.4 mA) |
| 109 |
95% |
| 110 |
mA-output table 95% value (19.2 mA) |
| 111 |
100% |
| 112 |
mA-output table 100% value (20.0 mA) |
| 113 |
Matrix T1 |
| 114 |
Matrix 1st temperature |
| 115 |
Matrix T2 |
| 116 |
Matrix 2nd temperature |
| 117 |
Matrix T3 |
| 118 |
Matrix 3rd temperature |
| 119 |
Matrix T4 |
| 120 |
Matrix 4th temperature |
| 121 |
Matrix T5 |
| 122 |
Matrix 5th temperature |
| 123 |
Matr.sel |
| 124 |
Selecting predefined matrix for temperature compensation |
| 125 |
HCl |
| 126 |
AMMON. |
| 127 |
MORPH. |
| 128 |
HCl 0-5% |
| 129 |
NaOH |
| 130 |
Free |
| 131 |
M1_1 |
| 132 |
Matrix 1st value at 1st temperature |
| 133 |
M1_2 |
| 134 |
Matrix 2nd value at 1st temperature |
| 135 |
M1_3 |
| 136 |
Matrix 3rd value at 1st temperature |
| 137 |
M1_4 |
| 138 |
Matrix 4th value at 1st temperature |
| 139 |
M1_5 |
| 140 |
Matrix 5th value at 1st temperature |
| 141 |
M2_1 |
| 142 |
Matrix 1st value at 2nd temperature |
| 143 |
M2_2 |
| 144 |
Matrix 2nd value at 2nd temperature |
| 145 |
M2_3 |
| 146 |
Matrix 3rd value at 2nd temperature |
| 147 |
M2_4 |
| 148 |
Matrix 4th value at 2nd temperature |
| 149 |
M2_5 |
| 150 |
Matrix 5th value at 2nd temperature |
| 151 |
M3_1 |
| 152 |
Matrix 1st value at 3rd temperature |
| 153 |
M3_2 |
| 154 |
Matrix 2nd value at 3rd temperature |
| 155 |
M3_3 |
| 156 |
Matrix 3rd value at 3rd temperature |
| 157 |
M3_4 |
| 158 |
Matrix 4th value at 3rd temperature |
| 159 |
M3_5 |
| 160 |
Matrix 5th value at 3rd temperature |
| 161 |
M4_1 |
| 162 |
Matrix 1st value at 4th temperature |
| 163 |
M4_2 |
| 164 |
Matrix 2nd value at 4th temperature |
| 165 |
M4_3 |
| 166 |
Matrix 3rd value at 4th temperature |
| 167 |
M4_4 |
| 168 |
Matrix 4th value at 4th temperature |
| 169 |
M4_5 |
| 170 |
Matrix 5th value at 4th temperature |
| 171 |
M5_1 |
| 172 |
Matrix 1st value at 5th temperature |
| 173 |
M5_2 |
| 174 |
Matrix 2nd value at 5th temperature |
| 175 |
M5_3 |
| 176 |
Matrix 3rd value at 5th temperature |
| 177 |
M5_4 |
| 178 |
Matrix 4th value at 5th temperature |
| 179 |
M5_5 |
| 180 |
Matrix 5th value at 5th temperature |
| 181 |
0% Weight |
| 182 |
The 0% weight indication value |
| 183 |
.0f |
| 184 |
3.0f |
| 185 |
100% Weight |
| 186 |
The 100% weight indication value |
| 187 |
Sec. |
| 188 |
Second value in transmitter |
| 189 |
2.0f |
| 190 |
Min. |
| 191 |
Minute value in transmitter |
| 192 |
Hrs. |
| 193 |
Hour value in transmitter |
| 194 |
Day. |
| 195 |
Day value in transmitter |
| 196 |
Mth. |
| 197 |
mth_unit |
| 198 |
Month value in transmitter |
| 199 |
Yr. |
| 200 |
year_unit |
| 201 |
Year value in transmitter |
| 202 |
Maintenance |
| 203 |
Passcode for maintenance level in SC202 Possible values: 0, 111, 333, 777, 888, 123, 957, 331, 546, 847 |
| 204 |
Commissioning |
| 205 |
Passcode for commisioning access in SC202 Possible values: 0, 111, 333, 777, 888, 123, 957, 331, 546, 847 |
| 206 |
Service |
| 207 |
Passcode for service access in SC202 Possible values: 0, 111, 333, 777, 888, 123, 957, 331, 546, 847 |
| 208 |
CC act |
| 209 |
Actual cell constant after calibration |
| 210 |
E6 lim. |
| 211 |
Limit for E6 (Conductivity too low) |
| 212 |
E5 lim. |
| 213 |
Limit for E5 (Conductivity too high) |
| 214 |
Temp.sens |
| 215 |
Selection of the temperature compensation sensor |
| 216 |
Pt1000 |
| 217 |
Ni100 |
| 218 |
Pb36 |
| 219 |
Pt100 |
| 220 |
8K55 |
| 221 |
Auto.Ret |
| 222 |
When Auto-return is ON, the converter reverts to the measuring mode from anywhere in the configuration menu, when no button is pressed during the set time interval of 10 minutes |
| 223 |
Percent |
| 224 |
When Percent by weight is ON, the 0% and 100% points can be entered |
| 225 |
Burn func. |
| 226 |
Diagnostic error messages can signal a problem by sending the output signals upscale or downscale (22mA or 3.9mA). The Pulse burnout setting gives a 22mA signal for the first 30 seconds of an alarm condition. After the pulse the signal returns to normal to activate a latching alarm |
| 227 |
Pls |
| 228 |
Pol.check |
| 229 |
When Polarisation check is ON, error 1 will be displayed in case of polirisation |
| 230 |
Electrodes |
| 231 |
Selection of the number of electrodes in the sensor |
| 232 |
2 |
| 233 |
4 |
| 234 |
Hold fnc. |
| 235 |
Enable or disable of the HOLD feature |
| 236 |
Hold type |
| 237 |
Sets the Hold function to Last measured value or Fixed value. |
| 238 |
Last |
| 239 |
Fixed |
| 240 |
Hold status |
| 241 |
Sets the mA-output of the instrument in hold. No influence from the process anymore The HOLD feature must first be enabled |
| 242 |
Temp.unit |
| 243 |
Celsius or fahrenheit scales to suit user preference |
| 244 |
°C |
| 245 |
°F |
| 246 |
USP |
| 247 |
Enable or disable USP limit test |
| 248 |
TC1 type |
| 249 |
Temperature compensation type (Disp 1) |
| 250 |
NaCl |
| 251 |
T.C. |
| 252 |
Matrix |
| 253 |
TC2 type |
| 254 |
Temperature compensation type (Disp 2) |
| 255 |
mA func. |
| 256 |
Linear output on primary process value when activated or a table function which allows the configuration of an output curve by 21 steps. |
| 257 |
PV-Linear |
| 258 |
PV-Table |
| 259 |
Fmt |
| 260 |
Format for displaying conductivity/resistivity |
| 261 |
Automatic |
| 262 |
x.xxx µS/cm |
| 263 |
xx.xx µS/cm |
| 264 |
xxx.x µS/cm |
| 265 |
x.xxx mS/cm |
| 266 |
xx.xx mS/cm |
| 267 |
xxx.x mS/cm |
| 268 |
xxxx mS/cm |
| 269 |
x.xxx MOhm.cm |
| 270 |
xx.xx MOhm.cm |
| 271 |
xxx.x MOhm.cm |
| 272 |
x.xxx kOhm.cm |
| 273 |
xx.xx kOhm.cm |
| 274 |
xxx.x kOhm.cm |
| 275 |
xxxx kOhm.cm |
| 276 |
month string |
| 277 |
Jan |
| 278 |
Feb |
| 279 |
Mar |
| 280 |
Apr |
| 281 |
May |
| 282 |
Jun |
| 283 |
Jul |
| 284 |
Aug |
| 285 |
Sep |
| 286 |
Oct |
| 287 |
Nov |
| 288 |
Dec |
| 289 |
logbook function |
| 290 |
Lgb1 Reset |
| 291 |
Lgb1 Read next item |
| 292 |
Lgb2 Reset |
| 293 |
Lgb2 Read next item |
| 294 |
logbook event nr |
| 295 |
logbook minute |
| 296 |
logbook hour |
| 297 |
logbook day |
| 298 |
logbook month |
| 299 |
logbook year |
| 300 |
logbook event code |
| 301 |
Powerup |
| 302 |
Powerdwn |
| 303 |
System |
| 304 |
Defaults |
| 305 |
Lgb.clr |
| 306 |
init |
| 307 |
L.R.V |
| 308 |
U.R.V |
| 309 |
Hld.on |
| 310 |
Hld.off |
| 311 |
Err.on |
| 312 |
Err.off |
| 313 |
Tmp.adj |
| 314 |
Cell c. |
| 315 |
Aircal. |
| 316 |
Calibr. |
| 317 |
Reftemp |
| 318 |
T.C. 1 |
| 319 |
T.C. 2 |
| 320 |
logbook unit |
| 321 |
Ohm |
| 322 |
|
| 323 |
logbook value |
| 324 |
12.1f |
| 325 |
dummy byte |
| 326 |
The event Powerup to be enabled/disabled in logbook1 or logbook2 |
| 327 |
Off |
| 328 |
On.LGB1 |
| 329 |
On.LGB2 |
| 330 |
The event Powerdown to be enabled/disabled in logbook1 or logbook2 |
| 331 |
Systemerr |
| 332 |
The event system error to be enabled/disabled in logbook1 or logbook2 |
| 333 |
The event Default loaded to be enabled/disabled in logbook1 or logbook2 |
| 334 |
Lg.Erased |
| 335 |
The event Logbook erased to be enabled/disabled in logbook1 or logbook2 |
| 336 |
Lg.Init |
| 337 |
The event initialization to be enabled/disabled in logbook1 or logbook2 |
| 338 |
Low range |
| 339 |
The event new output low range value to be enabled/disabled in logbook1 or logbook2 |
| 340 |
High range |
| 341 |
The event new output high range value to be enabled/disabled in logbook1 or logbook2 |
| 342 |
Hold on |
| 343 |
The event Hold-on to be enabled/disabled in logbook1 or logbook2 |
| 344 |
Hold off |
| 345 |
The event Hold-off to be enabled/disabled in logbook1 or logbook2 |
| 346 |
Error on |
| 347 |
The event Error-on to be enabled/disabled in logbook1 or logbook2 |
| 348 |
Error off |
| 349 |
The event Error-off to be enabled/disabled in logbook1 or logbook2 |
| 350 |
Temp. adj |
| 351 |
The event temperature adjusted to be enabled/disabled in logbook1 or logbook2 |
| 352 |
Cell const |
| 353 |
The event Cell Constant changed to be enabled/disabled in logbook1 or logbook2 |
| 354 |
Air cal. |
| 355 |
The event Air calibration to be enabled/disabled in logbook1 or logbook2 |
| 356 |
Calibrate |
| 357 |
The event Calibration to be enabled/disabled in logbook1 or logbook2 |
| 358 |
Ref. temp |
| 359 |
The event Ref. temperature changed to be enabled/disabled in logbook1 or logbook2 |
| 360 |
Temp.coef1 |
| 361 |
The event Temperature coefficient 1 changed to be enabled/disabled in logbook1 or logbook2 |
| 362 |
The event Matrix code changed to be enabled/disabled in logbook1 or logbook2 |
| 363 |
Temp.coef2 |
| 364 |
The event Temperature coefficient 2 changed to be enabled/disabled in logbook1 or logbook2 |
| 365 |
Invalid selection |
| 366 |
All read |
| 367 |
rec. broke |
| 368 |
Reads transmitter status and reports any transmitter errors. |
| 369 |
Logbook1 |
| 370 |
Reads content of logbook 1 from the SC202 transmitter |
| 371 |
Logbook2 |
| 372 |
Reads content of logbook 2 from the SC202 transmitter |
| 373 |
Offline |
| 374 |
Logbook |
| 375 |
Logbook conf. |
| 376 |
Param.specific |
| 377 |
Temp.specific |
| 378 |
Temp.compensation |
| 379 |
Matrix table |
| 380 |
Output function |
| 381 |
mA-table |
| 382 |
User Interface |
| 383 |
Error prog. |
| 384 |
Display |
| 385 |
Passcodes |
| 386 |
Write variables |
| 387 |
FMU860 |
| 388 |
DT |
| 389 |
DVC |
| 390 |
FCX |
| 391 |
AS800 |
| 392 |
340T |
| 393 |
340C |
| 394 |
344 |
| 395 |
Siemens Micro K |
| 396 |
SITRANS L |
| 397 |
SIPAN PH |
| 398 |
SITRANS P |
| 399 |
75SMT |
| 400 |
UNIDELTA |
| 401 |
8320 |
| 402 |
SX5100 |
| 403 |
TSV175 |
| 404 |
DMU |
| 405 |
3780 |
| 406 |
BM70 |
| 407 |
Transmitter Busy. |
| 408 |
Hard-fail active |
| 409 |
Device in conductivity mode |
| 410 |
No Errors |
| 411 |
Reading logbook 1
--please wait-- |
| 412 |
Lgb%{logbnr} Rec%{dsp}
Powerup
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 413 |
Lgb%{logbnr} Rec%{dsp}
Powerdown
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 414 |
Lgb%{logbnr} Rec%{dsp}
System error
Code: %[2d]{lrvalueint}
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 415 |
Lgb%{logbnr} Rec%{dsp}
Defaults loaded
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 416 |
Lgb%{logbnr} Rec%{dsp}
Logbook erased
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 417 |
Lgb%{logbnr} Rec%{dsp}
Initialized
Code: %[2d]{lrvalueint}
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 418 |
Lgb%{logbnr} Rec%{dsp}
Low range changed
%[8.1f]{lrvalue} uS
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 419 |
Lgb%{logbnr} Rec%{dsp}
Low range changed
%[10.0f]{lrvalue} Ohm
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 420 |
Lgb%{logbnr} Rec%{dsp}
High range changed
%[8.1f]{lrvalue} uS
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 421 |
Lgb%{logbnr} Rec%{dsp}
High range changed
%[10.0f]{lrvalue} Ohm
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 422 |
Lgb%{logbnr} Rec%{dsp}
Hold on
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 423 |
Lgb%{logbnr} Rec%{dsp}
Hold off
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 424 |
Lgb%{logbnr} Rec%{dsp}
Error on
%[2d]{lrvalueint}
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 425 |
Lgb%{logbnr} Rec%{dsp}
Error off
%[2d]{lrvalueint}
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 426 |
Lgb%{logbnr} Rec%{dsp}
Temp. offset
%[4.1f]{lrvalue} °C
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 427 |
Lgb%{logbnr} Rec%{dsp}
Temp. offset
%[5.1f]{lrvalue} °F
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 428 |
Lgb%{logbnr} Rec%{dsp}
Cell constant
%[6.3f]{lrvalue} /cm
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 429 |
Lgb%{logbnr} Rec%{dsp}
Air calibration
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 430 |
Lgb%{logbnr} Rec%{dsp}
Calibration
%[6.3f]{lrvalue} /cm
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 431 |
Lgb%{logbnr} Rec%{dsp}
Ref. temperature
%[5.1f]{lrvalue} °C
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 432 |
Lgb%{logbnr} Rec%{dsp}
Ref. temperature
%[5.1f]{lrvalue} °F
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 433 |
Lgb%{logbnr} Rec%{dsp}
Temp. coeff.1
%[4.2f]{lrvalue} %
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 434 |
Lgb%{logbnr} Rec%{dsp}
Matrix code
%[1d]{lrvalueint}
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 435 |
Lgb%{logbnr} Rec%{dsp}
Temp. coeff.2
%[4.2f]{lrvalue} %
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 436 |
Lgb%{logbnr} Rec%{dsp}
Unknown/new event
%{lrday}-%{0}-%[04d]{lryear} %{lrhr}:%[02d]{lrmin}
Next record? |
| 437 |
All records read. |
| 438 |
Reading logbook 2
--please wait-- |