HART设备字典

Loading…

引用ID	字符串
0	FLXA402
1	Device Status
2	PV Out of Limit
3	Non-PV Out of Limit
4	Loop Current Saturated
5	Loop Current Fixed
6	More Status Available
7	Cold Start
8	Configuration Changed
9	Device Malfunction
10	Extended Device Status
11	Failure
12	Out of Specification
13	Function Check
14	Standardized Status 0
15	Device Configuration Locked
16	Device is in write-protect or is locked.
17	Standardized Status 1
18	Status Simulation Active
19	The device status reported to the host may not represent the current state of the device.
20	Discrete Variable Simulation Active
21	The device is in simulation mode and one or more of its discrete variables are not representative of the process.
22	Device Specific Status 0
23	Hardware failure
24	Internal com. error
25	IO mod. param. read error
26	Com. mod. param. read error
27	CPU param. read error
28	Device Specific Status 1
29	VGB calc. error
30	Ratio calc. error
31	Passage calc. error
32	Rejection calc. error
33	Deviation calc. error
34	Script error
35	Device Specific Status 2
36	mA 1 output burn out
37	mA 2 output burn out
38	mA 3 output burn out
39	mA 4 output burn out
40	mA 1 saturation
41	mA 2 saturation
42	mA 3 saturation
43	mA 4 saturation
44	Device Specific Status 3
45	AI exceeds limit
46	AI out of range
47	Expiry time exceeded
48	Wash response failure
49	Converter Error Simulation
50	Fail safe occur
51	Device Specific Status 4
52	Simulated mA value 1
53	Simulated mA value 2
54	Simulated mA value 3
55	Simulated mA value 4
56	Outputs in HOLD1
57	Outputs in HOLD2
58	Outputs in HOLD3
59	Outputs in HOLD4
60	Device Specific Status 5
61	Output configuration error
62	Other configuration error
63	Device Specific Status 6
64	Sensor 1-1 device failure
65	Sensor 1-2 device failure
66	Sensor 1-3 device failure
67	Sensor 1-4 device failure
68	Sensor 2-1 device failure
69	Sensor 2-2 device failure
70	Sensor 2-3 device failure
71	Sensor 2-4 device failure
72	Device Specific Status 7
73	Sensor 1-1 configuration error
74	Sensor 1-2 configuration error
75	Sensor 1-3 configuration error
76	Sensor 1-4 configuration error
77	Sensor 2-1 configuration error
78	Sensor 2-2 configuration error
79	Sensor 2-3 configuration error
80	Sensor 2-4 configuration error
81	Device Specific Status 8
82	Temp. 1-1 exceeds user limit
83	Temp. 1-2 exceeds user limit
84	Temp. 1-3 exceeds user limit
85	Temp. 1-4 exceeds user limit
86	Temp. 2-1 exceeds user limit
87	Temp. 2-2 exceeds user limit
88	Temp. 2-3 exceeds user limit
89	Temp. 2-4 exceeds user limit
90	Device Specific Status 9
91	Process 1-1 exceeds user limit
92	Process 1-2 exceeds user limit
93	Process 1-3 exceeds user limit
94	Process 1-4 exceeds user limit
95	Process 2-1 exceeds user limit
96	Process 2-2 exceeds user limit
97	Process 2-3 exceeds user limit
98	Process 2-4 exceeds user limit
99	Device Specific Status 10
100	Sensor 1-1 measurement warning
101	Sensor 1-2 measurement warning
102	Sensor 1-3 measurement warning
103	Sensor 1-4 measurement warning
104	Sensor 2-1 measurement warning
105	Sensor 2-2 measurement warning
106	Sensor 2-3 measurement warning
107	Sensor 2-4 measurement warning
108	Device Specific Status 11
109	Sensor 1-1 out of spec.
110	Sensor 1-2 out of spec.
111	Sensor 1-3 out of spec.
112	Sensor 1-4 out of spec.
113	Sensor 2-1 out of spec.
114	Sensor 2-2 out of spec.
115	Sensor 2-3 out of spec.
116	Sensor 2-4 out of spec.
117	Device Specific Status 12
118	Sensor 1-1 warning
119	Sensor 1-2 warning
120	Sensor 1-3 warning
121	Sensor 1-4 warning
122	Sensor 2-1 warning
123	Sensor 2-2 warning
124	Sensor 2-3 warning
125	Sensor 2-4 warning
126	Device Specific Status 13
127	Sensor 1-1 disable
128	Sensor 1-2 disable
129	Sensor 1-3 disable
130	Sensor 1-4 disable
131	Sensor 2-1 disable
132	Sensor 2-2 disable
133	Sensor 2-3 disable
134	Sensor 2-4 disable
135	Config changed count
136	06x
137	Loop current(AO1) test
138	QV
139	Status Bit Not Supported
140	No Effect
141	Maintenance Required
142	Disabled
143	Enabled
144	Reset
145	Set
146	Primary Variable Out of Limits
147	Non-Primary Variable Out of Limits
148	Reserved
149	Critical Power Failure
150	Simulation active
151	Non-Volatile memory failure
152	Volatile memory error
153	Watchdog reset executed
154	Power supply conditions out of range
155	Environmental conditions out of range
156	Electronic failure
157	Device configuration locked
158	Status simulation active
159	Discrete Variable Simulation active
160	Event Notification Overflow
161	Secondary Analog Channel Saturated
162	Tertiary Analog Channel Saturated
163	Quaternary Analog Channel Saturated
164	Quinary Analog Channel Saturated
165	Subdevice list changed
166	Duplicate master detected
167	Sub-device mismatch
168	Sub-devices with duplicate IDs found
169	Stale data notice
170	Capacity Denied
171	Bandwidth allocation pending
172	Block transfer pending
173	Radio failure
174	Secondary Analog Channel Fixed
175	Tertiary Analog Channel Fixed
176	Quaternary Analog Channel Fixed
177	Quinary Analog Channel Fixed
178	Condensed status simulation
179	Allows simulation of different status conditions.
180	Condensed status value
181	Starting Status Map Index must be even value.
182	Bit Index
183
184	Sensor type
185	None
186	PH
187	SC
188	ISC
189	DO
190	Device status Simulate
191	Extended Device Status Simulate
192	Standardized Status 0 Simulate
193	Standardized Status 1 Simulate
194	AO saturated Simulate
195	AO fixed Simulate
196	Latched Device Diagnostic Status 2 Simulate
197	Latched Device Diagnostic Status 3 Simulate
198	Device Specific Status 0 Simulate
199	Device Specific Status 1 Simulate
200	Device Specific Status 2 Simulate
201	Device Specific Status 3 Simulate
202	Device Specific Status 4 Simulate
203	Device Specific Status 5 Simulate
204	Device Specific Status 6 Simulate
205	Device Specific Status 7 Simulate
206	Device Specific Status 8 Simulate
207	Device Specific Status 9 Simulate
208	Device Specific Status 10 Simulate
209	Device Specific Status 11 Simulate
210	Device Specific Status 12 Simulate
211	Device Specific Status 13 Simulate
212	Squawk
213	Off
214	On
215	Squawk Once
216	Current date
217	Current time
218	AI
219	.1f
220	.6e
221	.2f
222	g
223	Temp 1-1
224	Temp 1-2
225	Temp 1-3
226	Temp 1-4
227	Temp 2-1
228	Conduct1 1-1
229	Conduct1 1-2
230	Conduct1 1-3
231	Conduct1 1-4
232	Conduct1 2-1
233	Conduct2 1-1
234	Conduct2 1-2
235	Conduct2 1-3
236	Conduct2 1-4
237	Conduct2 2-1
238	Resist1 1-1
239	Resist1 1-2
240	Resist1 1-3
241	Resist1 1-4
242	Resist1 2-1
243	Resist2 1-1
244	Resist2 1-2
245	Resist2 1-3
246	Resist2 1-4
247	Resist2 2-1
248	ao1 current unit
249	ao_current unit
250	ai unit
251	diff_pH unit
252	diff_orp unit
253	diff_conduct unit
254	S/m
255	siemens per meter
256	uS/m
257	micro siemens per meter
258	S/cm
259	siemens per centimeter
260	diff_resist unit
261	Ohm m
262	ohm per meter
263	MOhm m
264	mega ohm per meter
265	diff_do unit
266	%SAT
267	pounds per square inch
268	average_ph unit
269	average_orp unit
270	average_conduct unit
271	average_resist unit
272	average_do unit
273	pH 1-1 unit
274	pH 1-2 unit
275	pH 1-3 unit
276	pH 1-4 unit
277	pH 2-1 unit
278	rH
279	nA
280	User select code 1
281	User select code 2
282	User select code 3
283	User select code 4
284	User select code 5
285	User select code 6
286	User select code 7
287	User select code 8
288	Temp coef(TC pH) unit
289	pH/degC
290	pH/degF
291	Temp coef(TC ORP) unit
292	mV/degC
293	mV/degF
294	Temp coef unit
295	%/degC
296	%/degF
297	Not supported
298	AO1 current
299	mA
300	AO2 current
301	AO3 current
302	AO4 current
303	AO1 precent
304	.3f
305	AO2 precent
306	AO3 precent
307	AO4 precent
308	AI current
309	AI temp
310	AI press
311	Contact in/out
312	S1
313	S2
314	S3
315	S4
316	DI1
317	DI2
318	Differential pH
319	pH
320	Differential ORP
321	mV
322	Differential Conduct
323	Differential Resist
324	Differential DO
325	Average pH
326	Average ORP
327	Average Conduct
328	Average Resist
329	Average DO
330	Ratio
331	Passage
332	%
333	Rejection
334	Deviation
335	pH calc
336	Script 1
337	Script 2
338	Script 3
339	Script 4
340	Script 5
341	Script 6
342	Script 7
343	Script 8
344	Device failure
345	SSA temp out. Design spec
346	pH temp comp failure
347	input volt. ORP2 low
348	input volt. ORP2 high
349	input volt. ORP1 low
350	input volt. ORP1 high
351	input volt. pH low
352	input volt. pH high
353	temp. resistance low
354	temp. resistance high
355	ID chip data param. read error
356	Sensor mod. not working
357	Factory param. read error
358	User param. read error
359	EEPROM error
360	Sensor status
361	imp2 glasbreak detect
362	imp1 glasbreak detect
363	calibration due
364	LE not detect
365	ID chip failure
366	Temp element not detect
367	Sensor not detect
368	Measurement warning
369	SSA temp out. Operating spec
370	pH temp comp warning
371	imp(ref) too low
372	imp(ref) too high
373	imp(pH/ORP) too low
374	imp(pH/ORP) too high
375	rH too low
376	rH too high
377	ORP too low
378	ORP too high
379	pH too low
380	pH too high
381	temp too low
382	temp too high
383	Device status
384	SENCOM Comm. Error
385	pH 1-1
386	ORP 1-1
387	rH 1-1
388	Sensor mV1 1-1
389	Sensor mV2 1-1
390	Sensor mV3 1-1
391	IMP1 1-1
392	ohm
393	IMP2 1-1
394	temp comp2 failure
395	temp comp1 failure
396	input resistance too low
397	input resistance too high
398	conc table error
399	matrix2 error
400	matrix1 error
401	Polarization detected
402	measurement unstable
403	USP margin exceeded
404	USP limit exceeded
405	temp comp2 warning
406	temp comp1 warning
407	conductivity too low
408	conductivity too high
409	Concent1 1-1
410	7g
411	Concent2 1-1
412	Sensor Ohms 1-1
413	Polarization 1-1
414	USP 1-1
415	input current too low
416	input current too high
417	sensor membrane failure
418	DO too low
419	DO too high
420	Oxygen1-1
421	Sensor current 1-1
422	Available KOH 1-1
423	pH 1-2
424	ORP 1-2
425	rH 1-2
426	Sensor mV1 1-2
427	Sensor mV2 1-2
428	Sensor mV3 1-2
429	IMP1 1-2
430	IMP2 1-2
431	Concent1 1-2
432	Concent2 1-2
433	PERCENT
434	PPM
435	PPB
436	PPTR
437	NONE
438	Sensor Ohms 1-2
439	Polarization 1-2
440	USP 1-2
441	Oxygen1-2
442	Sensor current 1-2
443	Available KOH 1-2
444	pH 1-3
445	ORP 1-3
446	rH 1-3
447	Sensor mV1 1-3
448	Sensor mV2 1-3
449	Sensor mV3 1-3
450	IMP1 1-3
451	IMP2 1-3
452	Concent1 1-3
453	Concent2 1-3
454	Sensor Ohms 1-3
455	Polarization 1-3
456	USP 1-3
457	Oxygen1-3
458	Sensor current 1-3
459	Available KOH 1-3
460	pH 1-4
461	ORP 1-4
462	rH 1-4
463	Sensor mV1 1-4
464	Sensor mV2 1-4
465	Sensor mV3 1-4
466	IMP1 1-4
467	IMP2 1-4
468	Concent1 1-4
469	Concent2 1-4
470	Sensor Ohms 1-4
471	Polarization 1-4
472	USP 1-4
473	Oxygen1-4
474	Sensor current 1-4
475	Available KOH 1-4
476	pH 2-1
477	ORP 2-1
478	rH 2-1
479	Sensor mV1 2-1
480	Sensor mV2 2-1
481	Sensor mV3 2-1
482	IMP1 2-1
483	IMP2 2-1
484	Concent1 2-1
485	Concent2 2-1
486	Sensor Ohms 2-1
487	Polarization 2-1
488	USP 2-1
489	Oxygen2-1
490	Sensor current 2-1
491	Available KOH 2-1
492	Polarization Voltage
493	V
494	Pressure level(process)
495	Sensor connect status
496	AO1 simulate ext host
497	AO2 simulate ext host
498	AO3 simulate ext host
499	AO4 simulate ext host
500	DO simulatte mode
501	DO simulatte value
502	Sub unit select
503	Sensor 1-1 subunit enable
504	Sensor 1-2 subunit enable
505	Sensor 1-3 subunit enable
506	Sensor 1-4 subunit enable
507	Sensor 2-1 subunit enable
508	Sensor 2-2 subunit enable
509	Sensor 2-3 subunit enable
510	Sensor 2-4 subunit enable
511	Test auto release time
512	10 min.
513	30 min.
514	60 min.
515	3 hours
516	6 hours
517	12 hours
518	AO1 mode
519	Output
520	Simulate
521	AO1 parameter
522	Temperature
523	ORP
524	Conductivity-TC1
525	Conductivity-TC2
526	Resistivity-TC1
527	Resistivity-TC2
528	Concentration-TC1
529	Concentration-TC2
530	Oxygen
531	Differential pH
532	Differential CONDUCT
533	Differential RESIST
534	Average CONDUCT
535	Average RESIST
536	Passage(%)
537	Rejection(%)
538	Deviation(%)
539	pH calc.(VGB)
540	Script1
541	Script2
542	Script3
543	Script4
544	Script5
545	Script6
546	Script7
547	Script8
548	AO1 target
549	Sensor 1-1
550	Sensor 1-2
551	Sensor 1-3
552	Sensor 1-4
553	Sensor 2-1
554	Sensor 2-2
555	Sensor 2-3
556	Sensor 2-4
557	Converter
558	AO1 function select
559	Linear
560	Table
561	AO1 LRV
562	AO1 URV
563	AO1 sub LRV
564	AO1 sub URV
565	AO1 burnout
566	Low
567	High
568	AO1 damping time
569	s
570	AO1 simulation value
571	AO1 hold Last/Fixed select
572	Last
573	Fixed
574	AO1 hold fixed value
575	AO1 hold during calibration
576	AO2 mode
577	AO2 parameter
578	AO2 target
579	AO2 function select
580	AO2 LRV
581	AO2 URV
582	AO2 sub LRV
583	AO2 sub URV
584	AO2 burnout
585	AO2 damping time
586	AO2 simulation value
587	AO2 hold Last/Fixed select
588	AO2 hold fixed value
589	AO2 hold during calibration
590	AO3 mode
591	AO3 parameter
592	AO3 target
593	AO3 function select
594	AO3 LRV
595	AO3 URV
596	AO3 sub LRV
597	AO3 sub URV
598	AO3 burnout
599	AO3 damping time
600	AO3 simulation value
601	AO3 hold Last/Fixed select
602	AO3 hold fixed value
603	AO3 hold during calibration
604	AO4 mode
605	AO4 parameter
606	AO4 target
607	AO4 function select
608	AO4 LRV
609	AO4 URV
610	AO4 sub LRV
611	AO4 sub URV
612	AO4 burnout
613	AO4 damping time
614	AO4 simulation value
615	AO4 hold Last/Fixed select
616	AO4 hold fixed value
617	AO4 hold during calibration
618	reserved
619	S1 type
620	Alarm
621	Hold
622	Wash
623	Fail
624	USP
625	S1 alram parameter
626	S1 alram target
627	S1 setpoint value
628	S1 direction select
629	S1 hysteresis value
630	S1 delay time
631	S1 expiry time
632	S1 interval time
633	h
634	S1 wash time
635	min
636	S1 recovery time
637	S1 manual wash select
638	Disabled + Imp2 high
639	Enabled + Imp2 high
640	S1 imp2high target
641	S1 continuous wash select
642	S1 USP target select
643	S1 fail setup
644	Hard + Soft Fail
645	Hard Fail only
646	S1 fail target select
647	S1 hold target AO
648	mA1
649	mA2
650	mA3
651	mA4
652	S1 simulation value
653	S2 type
654	S2 alram parameter
655	S2 alram target
656	S2 setpoint value
657	S2 direction select
658	S2 hysteresis value
659	S2 delay time
660	S2 expiry time
661	S2 interval time
662	S2 wash time
663	S2 recovery time
664	S2 manual wash select
665	S2 imp2high target
666	S2 continuous wash select
667	S2 USP target select
668	S2 fail setup
669	S2 fail target select
670	S2 hold target AO
671	S2 simulation value
672	S3 type
673	S3 alram parameter
674	S3 alram target
675	S3 setpoint value
676	S3 direction select
677	S3 hysteresis value
678	S3 delay time
679	S3 expiry time
680	S3 interval time
681	S3 wash time
682	S3 recovery time
683	S3 manual wash select
684	S3 imp2high target
685	S3 continuous wash select
686	S3 USP target select
687	S3 fail setup
688	S3 fail target select
689	S3 hold target AO
690	S3 simulation value
691	S4 type
692	Fail safe
693	S4 alram parameter
694	S4 alram target
695	S4 setpoint value
696	S4 direction select
697	S4 hysteresis value
698	S4 delay time
699	S4 expiry time
700	S4 fail setup
701	S4 fail target select
702	S4 simulate
703	AI type
704	Current
705	Pressure
706	Pressure comp.(DO70G)
707	AI Temp. LRV
708	AI Temp. URV
709	AI Press. LRV
710	AI Press. URV
711	AI damping time
712	AI upper Limit
713	AI lower limit
714	DI1 type
715	Contact input Wash
716	Contact input change range
717	DI1 wash target
718	DI1 change range target
719	DI2 type
720	DI2 wash target
721	DI2 change range target
722	Auto return time select
723	Luminance select
724	10%
725	20%
726	30%
727	40%
728	50%
729	60%
730	70%
731	80%
732	90%
733	100%
734	Backlight auto off time select
735	Squawk setting
736	AI temp unit
737	degC
738	degF
739	AI press unit
740	kPa
741	PSI
742	YYYY/MM/DD
743	MM/DD/YYYY
744	DD/MM/YYYY
745	Serial No.
746	Housing assy
747	mA output module
748	Communication module
749	Analog sensor module 1
750	Analog sensor module 2
751	Hardware devices
752	Software rev
753	Sensor memo
754	Method(pH)
755	TC
756	Matrix
757	NEN6411
758	Method(ORP)
759	ORP1 (uncomp)
760	ORP1 (comp.temp.coef)
761	ORP2 (uncomp)
762	ORP2 (comp.temp.coef)
763	Temp offset
764	Manual temp.
765	Reference temp.
766	Temp coef(TC pH)
767	Temp coef1(TC ORP)
768	Temp coef2(TC ORP)
769	Zero
770	Slope
771	ITP
772	Zero2
773	Slope2
774	zero high limit
775	zero low limit
776	slope high limit
777	slope low limit
778	Temp. high limit
779	Temp. low limit
780	Unit
781	Zero unit
782	Slope unit
783	mV/pH
784	pH + ORP
785	Temp. element
786	Pt1000
787	Pt100
788	3kBalco
789	6k8
790	500ohm
791	8k55
792	PTC10k
793	Compensation
794	Manual
795	Automatic
796	External input
797	Impedance 1
798	Impedance 2
799	pH high limit
800	pH low limit
801	ORP high limit
802	.0f
803	ORP low limit
804	rH high limit
805	rH low limit
806	High limit
807	k ohm
808	Low limit
809	FINE
810	M ohm
811	Select Buffer
812	NIST/DIN 19266
813	DIN 19267
814	US
815	Free programmable
816	Stabilization time
817	Step Range
818	Step Range(ORP)
819	Step Range(rH)
820	Calibr. Interval
821	d
822	Impedance measure
823	Progress time
824	BAD Limit
825	Heat cycle
826	cycles
827	Heat cycle temperature
828	Heat cycle time
829	Sterilized temp.
830	Sterilized time
831	High temp.1
832	High temp.2
833	High pH value
834	Low pH value
835	Modbus address
836	SC1 sel./comp.
837	Cond.(Uncomp.)
838	Cond.(TC1)
839	Cond.(Nacl)
840	Cond.(Matrix1)
841	Resist.(Uncomp.)
842	Resist.(TC1)
843	Resist.(Nacl)
844	Resist.(Matrix1)
845	SC2 sel./comp.
846	Cond.(TC2)
847	Cond.(Matrix2)
848	Resist.(TC2)
849	Resist.(Matrix2)
850	Concent1 sel./comp.
851	Matrix 1
852	Table and SC1
853	Reference temp
854	c.c.(factory)
855	c.c.(adjusted)
856	Temp coef1
857	Temp coef2
858	Select matrix1
859	NH3 0..50ppb
860	Morpholine 0..500ppb
861	NH3 15..30%
862	H2SO4 1..5%
863	H2SO4 0..27%
864	NaOH 1..5%
865	NaOH 0..15%
866	HCl 0..200ppb
867	HCl 0..5%
868	HCl 0..18%
869	HNO3 1..5%
870	HNO3 0..25%
871	User defined 1
872	User defined 2
873	Select matrix2
874	USP safety margin
875	c.c. high
876	c.c. low
877	Air calibration
878	uS
879	Calibr. interval
880	Temperature High Limit
881	Temperature Low Limit
882	Conductivity High Limit
883	Conductivity Low Limit
884	Resistance High Limit
885	Resistance Low Limit
886	Measuring unit
887	/cm
888	/m
889	2-electrode
890	4-electrode
891	Ni100
892	Pb36(JIS6k)
893	Polarization High Limit
894	H2SO4 39..85%
895	HCl 24..44%
896	HNO3 33..89%
897	NaOH 25..50%
898	NTC30k
899	AO1 hold
900	AO2 hold
901	AO3 hold
902	AO4 hold
903	Adjust touch screen flag
904	Measurement alarm
905	Script Error 4
906	Script Error 3
907	Script Error 2
908	Script Error 1
909	Internal com. Error
910	I/O alarm
911	Expiry time exceed 4
912	Expiry time exceed 3
913	Expiry time exceed 2
914	Expiry time exceed 1
915	AI exceed lower limit
916	AI exceed upper limit
917	mA 4 output saturation
918	mA 3 output saturation
919	mA 2 output saturation
920	mA 1 output saturation
921	mA output burn high 4
922	mA output burn high 3
923	mA output burn high 2
924	mA output burn high 1
925	mA output burn low 4
926	mA output burn low 3
927	mA output burn low 2
928	mA output burn low 1
929	Maintenance status
930	Simulated contact 4
931	Simulated contact 3
932	Simulated contact 2
933	Simulated contact 1
934	Wash 4 response failure
935	Wash 3 response failure
936	Wash 2 response failure
937	Wash 1 response failure
938	Outputs in HOLD 4
939	Outputs in HOLD 3
940	Outputs in HOLD 2
941	Outputs in HOLD 1
942	Simulated mA 4 value
943	Simulated mA 3 value
944	Simulated mA 2 value
945	Simulated mA 1 value
946	Setting alarm
947	DI configuration error
948	AI configuration error
949	Contact 4 configuration error
950	Contact 3 configuration error
951	Contact 2 configuration error
952	Contact 1 configuration error
953	Calc. setting error
954	HART setting error
955	Display 2-4 setting error
956	Display 2-3 setting error
957	Display 2-2 setting error
958	Display 2-1 setting error
959	Display 1-4 setting error
960	Display 1-3 setting error
961	Display 1-2 setting error
962	Display 1-1 setting error
963	Error in mA table 4
964	Error in mA table 3
965	Error in mA table 2
966	Error in mA table 1
967	mA 4 configuration error
968	mA 3 configuration error
969	mA 2 configuration error
970	mA 1 configuration error
971	PV map
972	Sensot mV1 1-1
973	Sensot mV2 1-1
974	Sensot mV3 1-1
975	Coundct1 1-1
976	Coundct2 1-1
977	Oxygen 1-1
978	Sensot mV1 2-1
979	Sensot mV2 2-1
980	Sensot mV3 2-1
981	Coundct1 2-1
982	Coundct2 2-1
983	Oxygen 2-1
984	Sensot mV1 1-2
985	Sensot mV2 1-2
986	Sensot mV3 1-2
987	Coundct1 1-2
988	Coundct2 1-2
989	Oxygen 1-2
990	Sensot mV1 1-3
991	Sensot mV2 1-3
992	Sensot mV3 1-3
993	Coundct1 1-3
994	Coundct2 1-3
995	Oxygen 1-3
996	Sensot mV1 1-4
997	Sensot mV2 1-4
998	Sensot mV3 1-4
999	Coundct1 1-4
1000	Coundct2 1-4
1001	Oxygen 1-4
1002	SV map
1003	TV map
1004	QV map
1005	AO1 select
1006	AO2 select
1007	AO3 select
1008	AO4 select
1009	Galvanic
1010	Polarographic
1011	Others
1012	DO30G
1013	Sensor sensitivity
1014	0.45uA/ppm
1015	0.90uA/ppm
1016	Sensor sensitivity(User defined)
1017	nA/ppm
1018	Zero Current
1019	Pressure level(calibration)
1020	Salinity
1021	mS/cm
1022	DO (mgl) high limit
1023	mg/L
1024	DO (mgl) low limit
1025	DO (ppm) high limit
1026	ppm
1027	DO (ppm) low limit
1028	DO (ppb) high limit
1029	ppb
1030	DO (ppb) low limit
1031	DO (%SAT) high limit
1032	DO (%SAT) low limit
1033	Pressure unit
1034	NTC22k
1035	zero point
1036	span point
1037	Memo
1038	Wash response failure 1
1039	Wash response failure 2
1040	Wash response failure 3
1041	Wash response failure 4
1042	Contact config. error 1
1043	Contact config. error 2
1044	Contact config. error 3
1045	Contact config. error 4
1046	LE detect
1047	Bad
1048	Quarter
1049	Half
1050	Three fourth
1051	Good
1052	Impedance1
1053	Impedance2
1054	Last calcutrated date/time
1055	Next calibration date/time
1056	Projected maintenance time
1057	(no meaning)
1058	0-1month
1059	1-3months
1060	3-6months
1061	6-12months
1062	>12months
1063	Projected Maintenance status
1064	(good pred.)
1065	(proper pred.)
1066	(poor pred.)
1067	Projected replacement time
1068	Projected replacement status
1069	Cell constant
1070	Polarization
1071	Projected calibration status
1072	Projected calibration time
1073	RS485
1074	Ethernet
1075	SENCOM_SA
1076	DO70
1077	ANALOG_SENSOR
1078	Basic
1079	Advance
1080	NotConnect
1081	GALV_SENSOR
1082	POLA_SENSOR
1083	OTHER
1084	MANUAL
1085	EXTERNAL
1086	quality
1087	limit
1088	update period
1089	Update time period help
1090	AO1 current quality
1091	AO1 current limit
1092	AI quality
1093	AI limit
1094	Differential pH quality
1095	Differential pH limit
1096	Differential ORP quality
1097	Differential ORP limit
1098	Differential Conduct quality
1099	Differential Conduct limit
1100	Differential Resist quality
1101	Differential Resist limit
1102	Differential DO quality
1103	Differential DO limit
1104	Average pH quality
1105	Average pH limit
1106	Average ORP quality
1107	Average ORP limit
1108	Average Conduct quality
1109	Average Conduct limit
1110	Average Resist quality
1111	Average Resist limit
1112	Average DO quality
1113	Average DO limit
1114	Ratio quality
1115	Ratio limit
1116	Passage quality
1117	Passage limit
1118	Rejection quality
1119	Rejection limit
1120	Deviation quality
1121	Deviation limit
1122	pH calc quality
1123	pH calc limit
1124	Script 1 quality
1125	Script 1 limit
1126	Script 2 quality
1127	Script 2 limit
1128	Script 3 quality
1129	Script 3 limit
1130	Script 4 quality
1131	Script 4 limit
1132	Script 5 quality
1133	Script 5 limit
1134	Script 6 quality
1135	Script 6 limit
1136	Script 7 quality
1137	Script 7 limit
1138	Script 8 quality
1139	Script 8 limit
1140	Temp 1-1 quality
1141	Temp 1-1 limit
1142	pH 1-1 quality
1143	pH 1-1 limit
1144	ORP 1-1 quality
1145	ORP 1-1 limit
1146	rH 1-1 quality
1147	rH 1-1 limit
1148	Sensor mV1 1-1 quality
1149	Sensor mV1 1-1 limit
1150	Sensor mV2 1-1 quality
1151	Sensor mV2 1-1 limit
1152	Sensor mV3 1-1 quality
1153	Sensor mV3 1-1 limit
1154	Conduct1 1-1 quality
1155	Conduct1 1-1 limit
1156	Conduct2 1-1 quality
1157	Conduct2 1-1 limit
1158	Resist1 1-1 quality
1159	Resist1 1-1 limit
1160	Resist2 1-1 quality
1161	Resist2 1-1 limit
1162	Concent1 1-1 quality
1163	Concent1 1-1 limit
1164	Concent2 1-1 quality
1165	Concent2 1-1 limit
1166	USP 1-1 quality
1167	USP 1-1 limit
1168	Sensor Ohms 1-1 quality
1169	Sensor Ohms 1-1 limit
1170	Oxygen 1-1 quality
1171	Oxygen 1-1 limit
1172	Sensor current 1-1 quality
1173	Sensor current 1-1 limit
1174	Temp 2-1 quality
1175	Temp 2-1 limit
1176	pH 2-1 quality
1177	pH 2-1 limit
1178	ORP 2-1 quality
1179	ORP 2-1 limit
1180	rH 2-1 quality
1181	rH 2-1 limit
1182	Sensor mV1 2-1 quality
1183	Sensor mV1 2-1 limit
1184	Sensor mV2 2-1 quality
1185	Sensor mV2 2-1 limit
1186	Sensor mV3 2-1 quality
1187	Sensor mV3 2-1 limit
1188	Conduct1 2-1 quality
1189	Conduct1 2-1 limit
1190	Conduct2 2-1 quality
1191	Conduct2 2-1 limit
1192	Resist1 2-1 quality
1193	Resist1 2-1 limit
1194	Resist2 2-1 quality
1195	Resist2 2-1 limit
1196	Concent1 2-1 quality
1197	Concent1 2-1 limit
1198	Concent2 2-1 quality
1199	Concent2 2-1 limit
1200	USP 2-1 quality
1201	USP 2-1 limit
1202	Sensor Ohms 2-1 quality
1203	Sensor Ohms 2-1 limit
1204	Oxygen 2-1 quality
1205	Oxygen 2-1 limit
1206	Sensor current 2-1 quality
1207	Sensor current 2-1 limit
1208	Temp 1-2 quality
1209	Temp 1-2 limit
1210	pH 1-2 quality
1211	pH 1-2 limit
1212	ORP 1-2 quality
1213	ORP 1-2 limit
1214	rH 1-2 quality
1215	rH 1-2 limit
1216	Sensor mV1 1-2 quality
1217	Sensor mV1 1-2 limit
1218	Sensor mV2 1-2 quality
1219	Sensor mV2 1-2 limit
1220	Sensor mV3 1-2 quality
1221	Sensor mV3 1-2 limit
1222	Conduct1 1-2 quality
1223	Conduct1 1-2 limit
1224	Conduct2 1-2 quality
1225	Conduct2 1-2 limit
1226	Resist1 1-2 quality
1227	Resist1 1-2 limit
1228	Resist2 1-2 quality
1229	Resist2 1-2 limit
1230	Concent1 1-2 quality
1231	Concent1 1-2 limit
1232	Concent2 1-2 quality
1233	Concent2 1-2 limit
1234	USP 1-2 quality
1235	USP 1-2 limit
1236	Sensor Ohms 1-2 quality
1237	Sensor Ohms 1-2 limit
1238	Oxygen 1-2 quality
1239	Oxygen 1-2 limit
1240	Sensor current 1-2 quality
1241	Sensor current 1-2 limit
1242	Temp 1-3 quality
1243	Temp 1-3 limit
1244	pH 1-3 quality
1245	pH 1-3 limit
1246	ORP 1-3 quality
1247	ORP 1-3 limit
1248	rH 1-3 quality
1249	rH 1-3 limit
1250	Sensor mV1 1-3 quality
1251	Sensor mV1 1-3 limit
1252	Sensor mV2 1-3 quality
1253	Sensor mV2 1-3 limit
1254	Sensor mV3 1-3 quality
1255	Sensor mV3 1-3 limit
1256	Conduct1 1-3 quality
1257	Conduct1 1-3 limit
1258	Conduct2 1-3 quality
1259	Conduct2 1-3 limit
1260	Resist1 1-3 quality
1261	Resist1 1-3 limit
1262	Resist2 1-3 quality
1263	Resist2 1-3 limit
1264	Concent1 1-3 quality
1265	Concent1 1-3 limit
1266	Concent2 1-3 quality
1267	Concent2 1-3 limit
1268	USP 1-3 quality
1269	USP 1-3 limit
1270	Sensor Ohms 1-3 quality
1271	Sensor Ohms 1-3 limit
1272	Oxygen 1-3 quality
1273	Oxygen 1-3 limit
1274	Sensor current 1-3 quality
1275	Sensor current 1-3 limit
1276	Temp 1-4 quality
1277	Temp 1-4 limit
1278	pH 1-4 quality
1279	pH 1-4 limit
1280	ORP 1-4 quality
1281	ORP 1-4 limit
1282	rH 1-4 quality
1283	rH 1-4 limit
1284	Sensor mV1 1-4 quality
1285	Sensor mV1 1-4 limit
1286	Sensor mV2 1-4 quality
1287	Sensor mV2 1-4 limit
1288	Sensor mV3 1-4 quality
1289	Sensor mV3 1-4 limit
1290	Conduct1 1-4 quality
1291	Conduct1 1-4 limit
1292	Conduct2 1-4 quality
1293	Conduct2 1-4 limit
1294	Resist1 1-4 quality
1295	Resist1 1-4 limit
1296	Resist2 1-4 quality
1297	Resist2 1-4 limit
1298	Concent1 1-4 quality
1299	Concent1 1-4 limit
1300	Concent2 1-4 quality
1301	Concent2 1-4 limit
1302	USP 1-4 quality
1303	USP 1-4 limit
1304	Sensor Ohms 1-4 quality
1305	Sensor Ohms 1-4 limit
1306	Oxygen 1-4 quality
1307	Oxygen 1-4 limit
1308	Sensor current 1-4 quality
1309	Sensor current 1-4 limit
1310	Clear config changed flag
1311	clear Configuration Changed Flag
1312	AO2 test
1313	AO3 test
1314	AO4 test
1315	Status simulation
1316	Simulation all clear
1317	Adjust touch panel
1318	Reset condensed status map
1319	AO hold for setup
1320	Online
1321	Sample
1322	Process variables root menu
1323	Dynamic variables
1324	Device variables
1325	CH1-1
1326	PH sensor
1327	SC sensor
1328	ISC sensor
1329	DO sensor
1330	CH1-2
1331	CH1-3
1332	CH1-4
1333	CH2-1
1334	Dynamic variables status
1335	Device variables status
1336	View input/output
1337	Sensor variables
1338	User select
1339	User select codes
1340	User select values
1341	Diagnostics root menu
1342	Detailed device status
1343	Maintenance root menu
1344	Test
1345	Display
1346	Error configuration
1347	Condensed status map
1348	Ext dev status
1349	Device diagnostic status 0
1350	Device diagnostic status 1
1351	Device root menu
1352	Basic setup
1353	Analog output
1354	AO1 is
1355	AO1 linear limit value
1356	AO1 table limit value
1357	AO2 is
1358	AO2 linear limit value
1359	AO2 table limit value
1360	AO3 is
1361	AO3 linear limit value
1362	AO3 table limit value
1363	AO4 is
1364	AO4 linear limit value
1365	AO4 table limit value
1366	HART basic setup
1367	Tag setting
1368	Detailed setup
1369	Analog output/input
1370	Analog output 1
1371	AO1 hold setting
1372	Analog output 2
1373	AO2 hold setting
1374	Analog output 3
1375	AO3 hold setting
1376	Analog output 4
1377	AO4 hold setting
1378	Analog input
1379	AI temperature
1380	AI pressure
1381	Contact input
1382	Contact input 1
1383	Contact input 2
1384	Display setup
1385	Device information
1386	Date/Time
1387	Internal serial No.
1388	Sensor information
1389	Sensor wellness
1390	Predict maintenance
1391	Setting information
1392	Configure sensor
1393	Measure setting
1394	Temperature settings
1395	Temp. compensation
1396	Process Temp. Compensation
1397	High/Low alarm setting
1398	Calibration settings
1399	Cal. set pH
1400	Limits and timing
1401	Buffers (select set)
1402	Zero/Slope/ITP
1403	Cal. set ORP/rH
1404	zero/slope
1405	zero/slope2
1406	Wellness settings
1407	Sensor diag. settings
1408	Define heat cycle
1409	Define SENCOM status
1410	Temp coef
1411	Limits
1412	Timing
1413	DO settings
1414	Salinity comp.
1415	Pressure comp.(Measure)
1416	Limits and timing (Galvanic)
1417	Limits and timing (Polarographic)
1418	Step Range(mgl)
1419	Step Range(ppm)
1420	Step Range(ppb)
1421	Step Range(%SAT)
1422	zero/slope(Galvanic)
1423	zero/slope(Polarographic)
1424	Pressure Comp.(Cal.)
1425	Check KOH residue
1426	HART detailed setup
1427	HART output
1428	HART identification
1429	HART sub unit setup
1430	HART revisions
1431	Offline root menu
1432	Upload variables
1433	PV Analog Channel Saturated
1434	PV Analog Channel Fixed
1435	Wireless
1436	WirelessHART Device
1437	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
1438	Primary
1439	Primary Analog Channel
1440	Secondary
1441	Secondary Analog Channel
1442	Tertiary
1443	Tertiary Analog Channel
1444	Quaternary
1445	Quaternary Analog Channel
1446	Quinary
1447	Quinary Analog Channel
1448	Lock all
1449	Trim not supported
1450	Configuration cannot be changed
1451	Locked by gateway
1452	Analog Input Channel
1453	Analog Output Channel
1454	The device is in simulation mode and the level output is not representative of the process.
1455	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
1456	The RAM memory check is invalid or maybe corrupt
1457	A watchdog reset has been performed
1458	Voltage conditions out of range
1459	A voltage condition is outside its allowable range
1460	An internal or environmental condition is beyond acceptable limits.
1461	A hardware problem not related to the sensor has been detected.
1462	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
1463	Battery life
1464	Percent range
1465	Loop current
1466	Primary variable
1467	Secondary variable
1468	Tertiary variable
1469	Quaternary variable
1470	Read receive time
1471	Write date and time
1472	Non-Volatile Clock
1473	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
1474	Clock Uninitialized
1475	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
1476	No restrictions
1477	SI Only
1478	Restricted to SI Unit codes only
1479	Process automation device
1480	Discrete device
1481	Hybrid:Process automation+discrete
1482	I/O System
1483	WirelessHART Process automation device
1484	WirelessHART Discrete device
1485	WirelessHART Process automation+discrete
1486	WirelessHART Gateway
1487	WirelessHART Access point
1488	WirelessHART Process adapter
1489	WirelessHART Discrete adapter
1490	WirelessHART enabled handheld/portable maintenance tool
1491	Device Profile
1492	United States of America
1493	JP
1494	Japan
1495	DE
1496	Germany
1497	FR
1498	France
1499	ES
1500	Spain
1501	RU
1502	Russian Federation
1503	CN
1504	People's Republic of China
1505	Secondary Master
1506	Primary Master
1507	Device Diagnostic Status 0
1508	Device Diagnostic Status 1
1509	I/O and Subdevice Status
1510	WirelessHART Status
1511	Time Set Option
1512	Real Time Clock Flags
1513	Country
1514	Country of intended device installation
1515	SI Unit Control
1516	Indicates if device should only display SI unit codes
1517	Time Stamp
1518	Relative time value on network
1519	8u
1520	Dynamic Variables Returned for Device Variables
1521	Command Response Truncated
1522	Configuration Change Counter Mismatch
1523	Status bytes mismatch
1524	count
1525	Device Variable
1526	Variable to trim
1527	STX Count
1528	Count of STX messages received by this device
1529	ACK Count
1530	Count of ACK messages received by this device
1531	BACK Count
1532	Count of BACK messages received by this device
1533	Latched Cfg chng count
1534	8.3f
1535	Device returned a response of warning. Please refer to the following.
1536	Device returned a response of error. Please refer to the following. After that this operation will be aborted.
1537	Are you sure to clear "Configuration Changed Flag"?
1538	Exit;Clear
1539	Configuration Changed Flag is already off.
1540	Configuration Changed Flag was cleared.
1541	Failed to clear Configuration Changed Flag.
1542	Are you sure to perform device reset ?
1543	Exit;Execute
1544	WARN-AO2 should be removed from automatic control
1545	WARN-AO3 should be removed from automatic control
1546	WARN-AO4 should be removed from automatic control
1547	Select the status simulation mode:
1548	Are you sure to change the status simulation mode ?
1549	Status bit simulation was disabled.
1550	Target bit to simulate:
1551	Exit simulation;Exit (as maintaining simulation);Device Status;Extended Device Status;Standardized Status 0;Standardized Status 1;Device Specific Status 0;Device Specific Status 1;Device Specific Status 2;Device Specific Status 3;Device Specific Status 4;Device Specific Status 5;Device Specific Status 6;Device Specific Status 7;Device Specific Status 8;Device Specific Status 9;Device Specific Status 10;Device Specific Status 11;Device Specific Status 12;Device Specific Status 13
1552	Set bit to simulate:
1553	There is active status. Please refer to the followings.
1554	All status are cleared.
1555	Are you sure to clear all simulation?
1556	AO1
1557	AO2
1558	AO3
1559	AO4
1560	Returning fld dev to original status
1561	Select squawk control:
1562	Squawk Off.
1563	Squawk in progress just for once.
1564	Squawk in progress.
1565	Is it OK to exit with Squawk Off ?
1566	Are you sure to execute the Touch Panel Adjustment ? If you select YES, the setting screen will appear on the LCD of the device.
1567	The Setting screen is displayed. Please operate the LCD of the device.
1568	WARN-Condensed status map will be reset to the default mapping values.
1569	Are you sure to reset to the default mapping values?
1570	Condensed status values were reset
1571	Choose AO hold
1572	All off;All on;Other
1573	NOTE-AO2 may be returned to automatic control
1574	NOTE-AO3 may be returned to automatic control
1575	NOTE-AO4 may be returned to automatic control
1576	Are you sure to disable status simulation ?
1577	Returning fld dev to original output (%{v_buf_text})
引用ID	字符串