| 0 |
LSIII |
| 1 |
DS III |
| 2 |
SIEMENS |
| 3 |
Lanlian Instruments |
| 4 |
Status summary |
| 5 |
Status summary- Data that has Field Device status information relating to: failures / warnings / status of process's. |
| 6 |
Sensor break |
| 7 |
Hardw/Firmw fail |
| 8 |
Reserved No Error |
| 9 |
Sensor Temp |
| 10 |
Oval flange |
| 11 |
Pres min span |
| 12 |
Pres USL |
| 13 |
Pres LSL |
| 14 |
316 SST/CF-8M SST |
| 15 |
Turcon-Variseal HF |
| 16 |
Copper |
| 17 |
Analog (spec scale) |
| 18 |
Analog (% linear) |
| 19 |
Digital |
| 20 |
Dig & analog (% lin) |
| 21 |
Dig & anl spec scale |
| 22 |
Lower Sensor Trim Point- Applied process pressureat which the last lower sensor trim was performed. |
| 23 |
Upper Sensor Trim Point- Applied process pressureat which the last upper sensor trim was performed. |
| 24 |
DrainVent/plug mat |
| 25 |
DrainVent/VentPlug Material- Construction material of the vent plug or a removable plug that exists on the flange type. |
| 26 |
Hast-C4 |
| 27 |
Silicone oil |
| 28 |
Silicone oil M50 |
| 29 |
High temp oil |
| 30 |
Inert |
| 31 |
Vegetable oil |
| 32 |
Halo Carbon oil |
| 33 |
Silicone oil gre free |
| 34 |
Hast-C276/SST |
| 35 |
Goldplated SST |
| 36 |
Diff (DP) PN 160 |
| 37 |
Gauge (GP) |
| 38 |
Diff (HP) PN 420 |
| 39 |
Draft rnge (DR) PN 32 |
| 40 |
Diff (DP) PN 320 |
| 41 |
Absolute |
| 42 |
Diff (DP) PN 240 |
| 43 |
Diff (DP) PN 315 |
| 44 |
Sq Rt, lin to Strtpt |
| 45 |
Sq Rt, 4mA to Strtpt |
| 46 |
Sq Rt, 2steps lin to Strtpt |
| 47 |
Extension length |
| 48 |
Extension length- Tube length of the Remote Seal. |
| 49 |
0 mm |
| 50 |
50 mm |
| 51 |
100 mm |
| 52 |
150 mm |
| 53 |
200 mm |
| 54 |
Enabled |
| 55 |
Disabled |
| 56 |
Zero only enabled |
| 57 |
Zero + span enabled |
| 58 |
316...SST |
| 59 |
431 SST |
| 60 |
Conn shank G1/2 A |
| 61 |
1/2-14NPTF |
| 62 |
1/4-18NPT, M12 |
| 63 |
1/4-18NPT,7/16-20UNF |
| 64 |
1/4-18NPT, M10 |
| 65 |
Han 7D plug compl |
| 66 |
Han 7D plug single |
| 67 |
Intrinsically safe
EEx ia IIC T4/T5/T6 |
| 68 |
Flame proof
EEx d IIC T5/T6 |
| 69 |
BASEEFA Ex N |
| 70 |
FM intrinsically safe |
| 71 |
FM explosion proof |
| 72 |
CSA intrinsically safe |
| 73 |
CSA explosion proof |
| 74 |
Ex-tested zone 2 |
| 75 |
FM intrinsically safe
+ explosion proof |
| 76 |
CSA intrinsically safe
+ explosion proof |
| 77 |
FM + CSA intrinsically safe
+ explosion proof |
| 78 |
Ex zone 2 (TÜV) |
| 79 |
Intrinsically safe
EEx ia + explosion proof EEx d (PTB) |
| 80 |
Startpoint square root- Determines the transition from linear resp. 4mA_constant to square root (Transfer Function). |
| 81 |
50000 kPa |
| 82 |
100000 kPa |
| 83 |
.4f |
| 84 |
.5f |
| 85 |
.2f |
| 86 |
.3f |
| 87 |
.6f |
| 88 |
.1f |
| 89 |
.7f |
| 90 |
.f |
| 91 |
.4g |
| 92 |
6.4f |
| 93 |
7.5f |
| 94 |
6.2f |
| 95 |
6.3f |
| 96 |
8.6f |
| 97 |
6.1f |
| 98 |
9.7f |
| 99 |
7.3f |
| 100 |
5.f |
| 101 |
7.1f |
| 102 |
7.4f |
| 103 |
7.2f |
| 104 |
10.4g |
| 105 |
5.3f |
| 106 |
7.f |
| 107 |
6.f |
| 108 |
°C |
| 109 |
Restore all defaults |
| 110 |
Restore DAC |
| 111 |
Restore Position Corr |
| 112 |
Restore Sensor Cal |
| 113 |
Execute Position Correction |
| 114 |
Execute write protection |
| 115 |
Span out of limits |
| 116 |
Master reset- Commands the SITRANS P electronics to reset. |
| 117 |
Status |
| 118 |
Upper AO limit- Defines the upper AO limit - from 20 mA to 22.0 mA. |
| 119 |
Upper AO limit |
| 120 |
4.1f |
| 121 |
5.2f |
| 122 |
Drain vent position- Position of the drain vent (opposite to process connection or at the side of process flange). |
| 123 |
Drain vent posit |
| 124 |
Opposite process con |
| 125 |
Side process flange |
| 126 |
Elect housing matl |
| 127 |
CF-8M SST |
| 128 |
Local Display unit |
| 129 |
0 |
| 130 |
50 |
| 131 |
100 |
| 132 |
150 |
| 133 |
200 |
| 134 |
Explos protection |
| 135 |
Explosion protection- Indicates the certification of the Field Device for the use in a hazardous area. |
| 136 |
Flameproof
EEx d IIC T5/T6 |
| 137 |
FM Intrinsically safe |
| 138 |
FM Explosionproof |
| 139 |
CSA Intrinsically safe |
| 140 |
CSA Explosionproof |
| 141 |
Process connection |
| 142 |
Process connection- Female thread and fastening screw thread (flange type). |
| 143 |
1/4-18NPT, 7/16-20UNF |
| 144 |
Electr connection |
| 145 |
Electr connection- Cable inlet. |
| 146 |
Pg 13.5 srew gland |
| 147 |
Fem thr M20 x 1.5 |
| 148 |
1/2-14 NPTF |
| 149 |
Han 7D plug |
| 150 |
Process flnge bolt |
| 151 |
Process flange bolts- Materials. |
| 152 |
Alrm LRV |
| 153 |
Alarm LRV- Low analog output alarm value (mA). |
| 154 |
Alrm URV |
| 155 |
Alarm URV- High analog output alarm value (mA). |
| 156 |
Startpoint sq root |
| 157 |
Startpoint square root- Determines the transition from linear to square root (Transfer Function). |
| 158 |
% |
| 159 |
factory trim values |
| 160 |
Restore Defaults |
| 161 |
Not Used |
| 162 |
RS fill fluid |
| 163 |
Remote Seal Fill Fluid- Fluid material in the device remote seal. |
| 164 |
Silicone oil M5 |
| 165 |
Vegetable oil |
| 166 |
Module rnge |
| 167 |
Module range- Measurement range of the module (unit kPa). |
| 168 |
|
| 169 |
2 kPa |
| 170 |
6 kPa |
| 171 |
25 kPa |
| 172 |
60 kPa |
| 173 |
100 kPa |
| 174 |
130 kPa |
| 175 |
160 kPa |
| 176 |
400 kPa |
| 177 |
500 kPa |
| 178 |
1600 kPa |
| 179 |
3000 kPa |
| 180 |
6300 kPa |
| 181 |
16000 kPa |
| 182 |
40000 kPa |
| 183 |
Temp |
| 184 |
Temp unit |
| 185 |
|
| 186 |
Index into Table 26 |
| 187 |
Index into Table 29 |
| 188 |
Model |
| 189 |
SITRANS P |
| 190 |
Num req preams |
| 191 |
Dev id |
| 192 |
Tag |
| 193 |
Date |
| 194 |
Write protect |
| 195 |
Final asmbly num |
| 196 |
Final Assembly Number- Number that is used for identification purposes, and is associated with the overall Field Device. |
| 197 |
8u |
| 198 |
Num resp preams |
| 199 |
Pressure unit |
| 200 |
Pres % rnge |
| 201 |
3.2f |
| 202 |
Pres USL |
| 203 |
Pres LSL |
| 204 |
Pres min span |
| 205 |
Pres xfer fnctn |
| 206 |
Sq root |
| 207 |
Pres URV |
| 208 |
Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. |
| 209 |
Pres LRV |
| 210 |
Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. |
| 211 |
Pres damp |
| 212 |
s |
| 213 |
4.2f |
| 214 |
Flange Type- Hardware, adjacent to the sensor, that physically connects the process to the sensor. |
| 215 |
O ring matl |
| 216 |
O Ring Material- Construction material of a seal that exists between the module and flange. |
| 217 |
Local meter |
| 218 |
Local meter- Defines whether there is a meter installed or not and possibly what information the meter will display. |
| 219 |
Remote Seal Type- Type of device that is capable of detecting and passing on the process pressure on to the module. This is only unambiguous if 1 remote seal is installed. |
| 220 |
Flnge construction |
| 221 |
Flange + extension |
| 222 |
Cell construction |
| 223 |
Flange without ext |
| 224 |
Fill fluid |
| 225 |
Fill Fluid- Fluid material in the module. |
| 226 |
Num remote seal |
| 227 |
Number of Remote Seals- Physical quantity of installed Remote Seals. |
| 228 |
AO |
| 229 |
AO alrm typ |
| 230 |
Hi |
| 231 |
Lo |
| 232 |
Pres snsr s/n |
| 233 |
Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. 0 indicates, that there is currently no Sensor Serial Number determined, because the sensor is uniquely defined by the Device ID. |
| 234 |
Meas typ |
| 235 |
Measurement Type- Type of measurement application this Field Device is intended to be used with (Diff, Gauge, Absolute, Liquid-lvl). |
| 236 |
Draft rnge (DR) PN 32 |
| 237 |
Lower sensor trim point |
| 238 |
Lower Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. |
| 239 |
Upper sensor trim point |
| 240 |
Upper Sensor Trim Point- Applied process pressure at which the last low sensor trim was performed. |
| 241 |
Flnge matl |
| 242 |
Flange Material- Construction material of flange type. |
| 243 |
RS isoltr matl |
| 244 |
Remote Seal Isolator Material- Construction material of a part of the remote seal type that comes in contact with the process material. This is only unambiguous if 1 remote seal is installed. |
| 245 |
316Ti SST |
| 246 |
Zirconium |
| 247 |
Gold/SST |
| 248 |
Isoltr matl |
| 249 |
Sensor Isolator Material- Construction material of a part of the module type that comes in contact with the process material. |
| 250 |
Version RS |
| 251 |
Locl keys ctrl mod |
| 252 |
Local Keys Control Mode- Controls the mode of the User Interface keys on the Field Device. |
| 253 |
Drain vent matl |
| 254 |
Drain Vent Material- Construction material of a removable plug that exists on the flange type that can be opened temporarily to remove unwanted process from the sensor area. |
| 255 |
Device order num |
| 256 |
Device order num- Device Order number. Respects to the current configuration |
| 257 |
Selftest- Commands the SITRANS P electronics to perform a selftest. Reports any errors that occured. |
| 258 |
Device maybe stuck in selftest. |
| 259 |
Self test OK |
| 260 |
Master reset |
| 261 |
Master reset OK |
| 262 |
Restore mfgr trims |
| 263 |
Restore mfgr trims- User trims (Sensor, DAC) will be erased. Factory trims will be restored. |
| 264 |
Not restore;Restore, yes |
| 265 |
MFGR trims restored |
| 266 |
Apply values |
| 267 |
Applied values- Perform a device rerange by applying the desired Upper Range Value and Lower Range Values to the device input. |
| 268 |
Loop test |
| 269 |
D/A trim |
| 270 |
Scaled D/A trim |
| 271 |
low |
| 272 |
high |
| 273 |
tmp_av |
| 274 |
Zero trim |
| 275 |
Zero trim- Make the sensor input the new zero input reference. The resulting offset must be within the defined limits. |
| 276 |
Send warning |
| 277 |
Send Warning- Yields a units code notice to the User. |
| 278 |
Variables which use this as the units code will be in the previous units until this value is sent to the device. |
| 279 |
Lower sensor trim |
| 280 |
Pressure Sensor Lower Trim- Calibrate the pressure sensor. |
| 281 |
Apply low pressure |
| 282 |
Press OK when pressure is stable |
| 283 |
Enter applied pressure value |
| 284 |
trim_point |
| 285 |
Remove pressure |
| 286 |
Upper sensor trim |
| 287 |
Pressure Sensor Upper Trim- Calibrate the pressure sensor. |
| 288 |
Apply hi pressure |
| 289 |
Exit Trim Mode- Notifies the User that the trim is finished. |
| 290 |
Trim was not done |
| 291 |
Write variables |
| 292 |
Device setup |
| 293 |
Basic setup |
| 294 |
Test/Status |
| 295 |
Sensors |
| 296 |
Signal condition |
| 297 |
Output condition |
| 298 |
Zero/Span set |
| 299 |
Temp sensor |
| 300 |
Sensor info |
| 301 |
Alarms |
| 302 |
Trim analog output |
| 303 |
Sensor trim points |
| 304 |
Hot key |
| 305 |
Construction matls |
| 306 |
Snsr |
| 307 |
Unit |
| 308 |
% rnge |
| 309 |
Min span |
| 310 |
Xfer fnctn |
| 311 |
USL |
| 312 |
LSL |
| 313 |
URV |
| 314 |
LRV |
| 315 |
Damp |
| 316 |
No specific error |
| 317 |
Update fail |
| 318 |
Device maybe stuck in selftest. |
| 319 |
Master Reset in
progress please wait |
| 320 |
Master reset OK |