Device dictionary

Loading…

Reference ID	String
0	KGP5000
1	KOSO
2	Failure
3	Out of Specification
4	Function Check
5	Device Configuration Locked
6	reserved
7	EEPROM error
8	Position sensor fail
9	Supply pressure fail
10	Pressure out-1 fail
11	Pressure out-2 fail
12	High supply pressure
13	Low supply pressure
14	Position Alarm
15	Deviation Alarm
16	Temperature Alarm
17	4-20mA Input Signal Alarm
18	PST Alarm
19	Reserved
20	Maintenance required
21	Out of specification
22	Check function
23	Input
24	Position
25	IP signal
26	Pot. angle
27	Temperature
28	Sup. press.
29	Out1 press.
30	Out2 press.
31	Set point
32	Input
33	Input value
34	.1f
35	Input unit
36	Input Dev fmly
37	Input Class
38	Input PDQ
39	Input LS
40	Input Fmly stat
41	Input USL
42	Input LSL
43	Input min span
44	Input damp
45	Input Update Period
46
47	Input snsr s/n
48	7d
49	Input Lower trim
50	Input Upper trim
51	Input Trim support
52	Input Min lower trim
53	Input Max lower trim
54	Input Min upper trim
55	Input Max upper trim
56	Input Min trim diff
57	Simulate
58	Update Period
59	Position
60	Position value
61	Position unit
62	Position Dev fmly
63	Position Class
64	Position PDQ
65	Position LS
66	Position Fmly stat
67	Position USL
68	Position LSL
69	Position min span
70	Position damp
71	Position Update Period
72	Position snsr s/n
73	IP signal
74	IP signal value
75	IP signal unit
76	IP signal Dev fmly
77	IP signal Class
78	IP signal PDQ
79	IP signal LS
80	IP signal Fmly stat
81	IP signal USL
82	IP signal LSL
83	IP signal min span
84	IP signal damp
85	7.1f
86	IP signal Update Period
87	IP signal snsr s/n
88	Angle
89	Angle value
90	.4f
91	Angle unit
92	Angle Dev fmly
93	Angle Class
94	Angle PDQ
95	Angle LS
96	Angle Fmly stat
97	Angle USL
98	Angle LSL
99	Angle min span
100	Angle damp
101	10.4f
102	Angle Update Period
103	Angle snsr s/n
104	Postion sensor angle
105	Device temperature
106	Temperature unit
107	Temperature Units
108	Temp Class
109	Temp PDQ
110	Temp LS
111	Temp Dev Stat
112	Temp USL
113	f
114	Temp LSL
115	Temp min span
116	Temp Update Period
117	Temp snsr s/n
118	P-sup.
119	Pressure-supply
120	.2f
121	P-sup. Class
122	P-sup. PDQ
123	P-sup. LS
124	P-sup. Dev Stat
125	P-sup. USL
126	P-sup. LSL
127	P-sup. min span
128	P-sup. Update Period
129	P-sup. snsr s/n
130	P-out1
131	Pressure-out1
132	P-out1 Class
133	P-out1 PDQ
134	P-out1 LS
135	P-out1 Dev Stat
136	P-out1 USL
137	P-out1 LSL
138	P-out1 min span
139	P-out1 Update Period
140	P-out1 snsr s/n
141	P-out2
142	Pressure-out2
143	P-out2 Class
144	P-out2 PDQ
145	P-out2 LS
146	P-out2 Dev Stat
147	P-out2 USL
148	P-out2 LSL
149	P-out2 min span
150	P-out2 Update Period
151	P-out2 snsr s/n
152	Set point
153	Set point value
154	Set point unit
155	Set point Dev fmly
156	Set point Class
157	Set point PDQ
158	Set point LS
159	Set point Fmly stat
160	Set point USL
161	Set point LSL
162	Set point min span
163	Set point damp
164	Set point Update Period
165	Set point snsr s/n
166	Set point Lower trim
167	Set point Upper trim
168	Set point Trim support
169	Set point Min lower trim
170	Set point Max lower trim
171	Set point Min upper trim
172	Set point Max upper trim
173	Set point Min trim diff
174	Pos
175	PO1
176	Diff PO1-PO2
177	Index
178	add time
179	Clear time
180	Root menu
181	Menu
182	Device Root Menu
183	Extended menu
184	Process Variables Root Menu
185	Trends
186	P-sup
187	Diagnosis Root Menu
188	Diagnosis Extended Menu
189	Alarm status
190	Information
191	Setup
192	Maintenance
193	Diag. & Alarms
194	Monitor
195	Status
196	Input/posi etc
197	Pressure
198	Position alarm
199	Deviation alarm
200	Temperature alarm
201	S-pressure alarm
202	Pst alarm
203	Other failure
204	Positioner info.
205	Version
206	Config. parameter
207	Actuator setup
208	Valve action
209	Packing friction
210	Booster option
211	Set point dir.
212	Posi. transmit. dir.
213	PT burnout
214	PID parameter set
215	Cutoff or Limit
216	Dead band
217	Transfer function
218	Input damper
219	Range ability
220	Sprit range
221	Integ. stop pres.
222	Diag. result
223	Total stroke
224	Total dir. change
225	Low position time
226	Total time
227	25% step response
228	< Now >
229	<Prev.>
230	<Init.>
231	Pneumatic span
232	Pneumatic drift
233	S-valve signature
234	PST setup info.
235	Basic setup
236	Actuator type
237	Actuator type setting
238	Easy tuning
239	Full autotune
240	Tuning result
241	Position setup
242	Position span setup
243	Position Adjust
244	Adjust span 0% point.
245	1) Adjust by buttons below.
246	2) Ok to next
247	Auto span
248	Span autotune
249	Expert tuning
250	PID custom setup
251	Air-Out (not)= Air-In?
252	PID parameter Air-In
253	PID parameter Air-Out
254	Inside threshold
255	Inside PID AI
256	Inside PID AO
257	Sensitivity setup
258	Auto bias & size
259	Auto bias & size tuning
260	Auto bias
261	Auto bias tuning
262	Manual BIAS
263	25:
264	75:
265	Detail Setup
266	Transfer Function
267	Custom Curve
268	Range Ability
269	Damper Setting
270	Split Range
271	PT burnout dir.
272	AT span limit
273	Log Clear
274	Reset diagnosis data
275	Function select
276	Authority
277	Control mode
278	Password setup
279	Screen saver
280	Pressure unit
281	Calibration
282	Position Transmitter Calibration
283	Select 0%-side or 100%-side to adjust.
284	Position adjust
285	You can adjust output signal by 'up'/'down'.
286	Pilot relay adju.
287	Pilot relay adjust
288	Simulation test
289	Manual input
290	Preset input
291	Ramp resp. test
292	Step resp. test
293	Memory save & res
294	Service
295	AD values
296	Time stamp
297	PID values
298	Factory menu
299	HART Relation
300	Find Device
301	Squawk
302	HART/Device Information
303	Dynamic variable assignment
304	Factory setup
305	IP signal range
306	IP signal factor
307	Virtual DIP SW
308	Cutoff IP signal
309	Online diag. setup
310	Total Stroke Setting
311	Total Direction Change Setting
312	Low Position Setting
313	Max/Min Temperature Setting
314	Partial stroke T.
315	Offline diag. set.
316	Offline diag. test
317	Alarm setup
318	High sup-pres. AL
319	Low sup-pres. AL
320	High/Low sup-pres. AL
321	All alarm clear
322	NAMUR status sel.
323	Position alarm NAMUR status
324	Deviation alarm NAMUR status
325	Temperature alarm NAMUR status
326	High sup-pressure NAMUR status
327	Low sup-pressure NAMUR status
328	Diag. test data
329	PST alarm result
330	Valve Signature
331	View Graph
332	Advanced Diagnostics
333	Abort Operation
334	Abort operation
335	Read Autotune Status
336	Read autotune status
337	Open protected menu
338	Entering the password to open protected menus.
339	Enter the password to open protected menus
340	Close protected menu
341	Close protected menus.
342	Abort Autotune
343	Abort autotune
344	Position alarm setting
345	Deviation alarm setting
346	Temperature alarm setting
347	High/Low supply pressure alarm setting
348	Actuator motion
349	Actuator motion setting
350	Valve action setting
351	Packing friction setting
352	Booster option setting
353	Set point direction setting
354	Position transmitter direction setting
355	Full Autotune
356	Start full-autotune
357	Exit span setting mode
358	0%
359	Lower position(0%) setup
360	100%
361	Upper position(0%) setup
362	Adjust span 100% point.
363	Span Autotune
364	Start span-autotune
365	Response tuning
366	PID parameter set setting
367	Flag of Air-Out PID parameters are not equal to Air-In
368	PID parameter
369	PID parameter @ air-in setting
370	PID parameter @ air-out setting
371	Inside threshold parameter setting
372	Inside PID @ air-in
373	Inside PID @ air-out
374	Start auto bias & size tuning
375	Start auto bias
376	Start auto bias tuning
377	Manual BIAS setting.
378	Cutoff or Limit setting
379	Dead band setting
380	Transfer function setting
381	Used to read/write user defined transfer function. The curve can have 19 data points.
382	Range ability setting
383	Input damper setting
384	Split range
385	Split range setting
386	PT burnout direction setting
387	Autotune span limit setting
388	Pressure to stop integration
389	Authority setting
390	Control mode setting
391	Screen saver setting
392	Temperature unit setting
393	Presure unit setting
394	Input signal cal.
395	Input signal calibration
396	Cross point cal.
397	Cross point calibration
398	Position transmit
399	Position transmitter calibration
400	Pressure sensor
401	Pressure sensor calibration
402	Set Moving Value
403	Relative position adjust
404	Set Value
405	Absolute position adjust
406	Position transit.
407	Perform ramp response test.
408	ramp_operation
409	Perform step response test.
410	Save
411	Data save
412	Restore
413	Data restore
414	Factory default
415	Set factory default data.
416	Enable factory menu.
417	Find device
418	Read Device Information
419	Write Tag
420	Write tag data.
421	Write Descriptor
422	Write descriptor data.
423	Write Date
424	Write date data.
425	Write Long Tag
426	Write long tag.
427	Write Message
428	Write message data.
429	Write Final asmbly num
430	Write final assembly number.
431	Reset
432	Reset this device
433	IP signal range setting.
434	IP signal factor setting.
435	Virtual DIP SW setting.
436	Cutoff IP signal setting.
437	Total stroke setting
438	Diag. log clear
439	PST (offline)
440	High supply pressure alarm setting
441	Low supply pressure alarm setting
442	Pressure failure
443	Error/Alarm Clear
444	Position alarm NAMUR status select.
445	Deviation alarm NAMUR status select.
446	Temperature alarm NAMUR status select.
447	High supply pressure alarm NAMUR status select.
448	Low supply pressure alarm NAMUR status select.
449	Step res. save
450	Save 25% step res. result as prev. or init. data.
451	Pneu. span save
452	Save pneu. span test result as prev. or init. data.
453	Pneu. drift save
454	Save pneu. drift test result as prev. or init. data.
455	S-valve sig. save
456	Save S-valve sig. result as prev. or init. data.
457	Configuration and Execution
458	Clear Graph Data
459	Serial No.
460	Device serial no
461	08u
462	Read serial number
463	Read device serial number
464	Position alarm status
465	OK
466	NG
467	Deviation alarm status
468	Temperature alarm status
469	Input signal alarm
470	Input signal alarm status
471	PST alarm
472	Reserved alarm
473	Reserve
474	CPU error
475	CPU error status
476	Good
477	Fail
478	EEPROM error status
479	Position sensor error
480	Position sensor error status
481	P-sup. sensor error
482	Supply pressure sensor error status
483	P-out1 sensor error
484	Out-1 pressure sensor error status
485	P-out2 sensor error
486	Out-2 pressure sensor error status
487	High sup-pres. alram
488	High supply-pressure alram status
489	Low sup-pres. alram
490	Low supply-pressure alram status
491	Position alarm history
492	Deviation alarm history
493	Temperature alarm history
494	Input signal alarm history
495	PST alarm history
496	Position sensor error (history)
497	Supply pressure sensor error (history)
498	Out-1 pressure sensor error (history)
499	Out-2 pressure sensor error (history)
500	High sup-pres. alram history
501	High supply-pressure alram history
502	Low sup-pres. alram history
503	Low supply-pressure alram history
504	PST stroke alarm
505	NG:Valve does not stroke.
506	PST incomplete alarm
507	NG:PST does not complete.
508	Pst pressure alarm
509	NG:Pressure is too large.
510	PST reserved alarm
511	Alarm code
512	Error code
513	Error status
514	Supply pressure sensor error
515	Out-1 pressure sensor error
516	Out-2 pressure sensor error
517	Supply pressure high alarm
518	Supply pressure low alarm
519	Alarm back
520	Past alarm status
521	Error back
522	Past error status
523	PST alarms
524	Alarms on PST
525	Valve does not stroke
526	PST does not complete
527	Pressure is too large
528	LCD/HART
529	LCD&SW/HART mode flag
530	HART
531	LCD
532	Operation mode at HART
533	4-20mA
534	Span tuning
535	Positon transmitter cal.
536	Pressure cal.
537	Torque motor forced output
538	Mode
539	Local control mode
540	Manual
541	Autotune
542	Stroke range
543	Cross point
544	Step mode(HART)
545	Ramp mode(HART)
546	(Diag.)Step response
547	(Diag.)Pneumatic span
548	(Diag.)Pneumatic drift
549	(Diag.)Valve signature
550	(Diag.)Partil stroke t.
551	Actuator motion type
552	Linear
553	Rotary
554	Actuator action type
555	Single
556	Double
557	5300 Actuator
558	5300:KOSO high power actuator
559	Other
560	5300
561	Packing friction type
562	Low
563	High
564	With/Wgithout Booster
565	Without
566	With
567	Set point direction
568	Normal
569	Reverse
570	Valve direction
571	RA
572	DA
573	Valve action type
574	ATO
575	ATC
576	Position transmitter direction
577	Reverse PID
578	Reverse direction PID flag
579	Disable
580	Enable
581	Reverse PID method
582	Reverse direction PID method
583	Velocity
584	Deviation
585	Celsius
586	Fahrenheit
587	Dead band flag
588	Fuzzy
589	Fuzzy flag
590	PT burnout direction
591	Factory setup menu flag
592	OFF
593	ON
594	Reserve flags
595	Reserve flags(byte)
596	Actuator Type Write Control flag 0
597	Device Setting Write Control flag
598	Actuator Type Write Control flag 1
599	Actuator Type Write Control flag 2
600	Autotune span limit setting value
601	%
602	d
603	Cross Point
604	Cross point setting value
605	deg
606	Read Cross Point Setting
607	Read cross point setting
608	Horizontal Mode
609	Horizontal point setting mode
610	Exit
611	Enter
612	Already in this mode!
613	invalid mode selection
614	INVALID MODE SELECTION
615	Position Adjust Mode flag
616	Position adjust mode flag
617	Absolute
618	Relative
619	Adjust Quantity
620	Position adjust moving quantity
621	Span Setting Stroke 0
622	Span Setting Stroke 100
623	Manual Span flag
624	Span set by manual
625	Span Position Setting Mode
626	Set span position setting mode
627	100%side(not 0%side)
628	In Span setting mode
629	Span Setting Side flag
630	Span setting side flag
631	Start
632	Start position
633	End
634	End position
635	Step
636	Step value
637	Time
638	Step time
639	s
640	Repeat
641	Step operation repeat
642	Continuous
643	One time only
644	Start Position
645	Ramp operation start position
646	Stop Position
647	Ramp operation target position
648	Wait Time
649	Ramp operation time before ramp action
650	Ramp Time
651	Ramp operation target time
652	Ramp operation repeat flag
653	0% side
654	Select cutoff/limit for 0% side
655	Cutoff
656	Limit
657	0% side value
658	Lower cutoff/limit value
659	100% side
660	Select cutoff/limit for 100% side
661	100% side value
662	Upper cutoff/limit value
663	Min
664	Split range min value
665	Max
666	Split range max value
667	Split range 0% value
668	mA
669	Split range 100% value
670	X1 Value =
671	Custum curve value for index #1
672	5.1f
673	Y1 Value =
674	X2 Value =
675	Custum curve value for index #2
676	Y2 Value =
677	X3 Value =
678	Custum curve value for index #3
679	Y3 Value =
680	X4 Value =
681	Custum curve value for index #4
682	Y4 Value =
683	X5 Value =
684	Custum curve value for index #5
685	Y5 Value =
686	X6 Value =
687	Custum curve value for index #6
688	Y6 Value =
689	X7 Value =
690	Custum curve value for index #7
691	Y7 Value =
692	X8 Value =
693	Custum curve value for index #8
694	Y8 Value =
695	X9 Value =
696	Custum curve value for index #9
697	Y9 Value =
698	X10 Value =
699	Custum curve value for index #10
700	Y10 Value =
701	X11 Value =
702	Custum curve value for index #11
703	Y11 Value =
704	X12 Value =
705	Custum curve value for index #12
706	Y12 Value =
707	X13 Value =
708	Custum curve value for index #13
709	Y13 Value =
710	X14 Value =
711	Custum curve value for index #14
712	Y14 Value =
713	X15 Value =
714	Custum curve value for index #15
715	Y15 Value =
716	X16 Value =
717	Custum curve value for index #16
718	Y16 Value =
719	X17 Value =
720	Custum curve value for index #17
721	Y17 Value =
722	X18 Value =
723	Custum curve value for index #18
724	Y18 Value =
725	X19 Value =
726	Custum curve value for index #19
727	Y19 Value =
728	X20 Value =
729	Custum curve value for index #20
730	Y20 Value =
731	Transfer function select value
732	Equal percent low
733	Equal percent Mid
734	Equal percent High
735	Quick opening
736	Custom curve
737	Autotune status
738	No Autotune
739	PID Autotune
740	BIAS Autotune
741	Complete Autotune
742	Autotune result
743	Completed OK!
744	In execute
745	Aborted
746	Error at closing
747	Error at opening
748	Error at stopping
749	Error (marginal method)
750	Error at span measurement
751	Autotune Type
752	Autotune type
753	Full
754	Span
755	Sensitivity
756	Bias
757	Stroke sp. (Air-In)
758	Stroke speed at Posi-UP.
759	ms
760	5u
761	Stroke sp. (Air-Out)
762	Stroke speed at Posi-DN.
763	Rank
764	Rank setting value
765	-
766	Custom
767	XS
768	SS
769	S
770	M
771	L
772	LL
773	XL
774	Custom PID flag
775	Response tuning setting
776	-9 More stable
777	-8 More stable
778	-7 More stable
779	-6 More stable
780	-5 More stable
781	-4 More stable
782	-3 More stable
783	-2 More stable
784	-1 More stable
785	0 Normal
786	+1 More aggressive
787	+2 More aggressive
788	+3 More aggressive
789	+4 More aggressive
790	+5 More aggressive
791	+6 More aggressive
792	+7 More aggressive
793	+8 More aggressive
794	+9 More aggressive
795	Rank Setting Write Control flags
796	PID setting write control flags
797	Use different Air-Out PID from Air-In.
798	No
799	Yes
800	P value
801	PID setting P value
802	I value
803	PID setting I value
804	D value
805	PID setting D value
806	rP value
807	PID setting reverse P value
808	rI value
809	Pid setting reverse I value
810	rD value
811	Pid setting reverse D value
812	Deviation threshold for inside PID
813	Inside P value
814	Inside I value
815	Inside D value
816	Inside rP value
817	Inside rI value
818	Inside rD value
819	PID Setting Write Control flags
820	reverse PID flag
821	reverse P value
822	reverse I value
823	reverse D value
824	Inside reverse P
825	Inside reverse I
826	Inside reverse D
827	Input damper flag
828	Input damper setting flag
829	Input damper factor
830	Input damper setting factor
831	minutes
832	Dead band setting flag
833	Dead band value
834	Dead band setting value
835	Range ability setting value
836	u
837	0% side
838	Cutoff IP signal 0% side setting value
839	Cutoff IP signal 100% side setting value
840	Position alarm NAMUR status setting
841	Maintenance req.
842	Out of spec.
843	Deviation alarm NAMUR status setting
844	Temperature alarms
845	Temperature alarm NAMUR status setting
846	High sup-pressure alarm
847	Supply pressure high alarm NAMUR status setting
848	Low sup-pressure alarm
849	Supply pressure low alarm NAMUR status setting
850	Test result index
851	Diagnosis test result index
852	Now
853	Prev.
854	Init.
855	O.S. 0-25
856	Over shoot of step response test
857	O.S. 25-50
858	O.S. 50-75
859	O.S. 75-100
860	O.S. 100-75
861	O.S. 75-50
862	O.S. 50-25
863	O.S. 25-0
864	Dev. 0
865	Deviation of step response test
866	Dev. 0-25
867	Dev. 25-50
868	Dev. 50-75
869	Dev. 75-100
870	Dev. 100-75
871	Dev. 75-50
872	Dev. 50-25
873	Dev. 25-0
874	Test result
875	Pneumatic span test result
876	P1 not reach 0 @IPmin
877	P2 not zero @IPmin
878	P2 not reach Ps@IPmin
879	P1 not reach Ps@IPmax
880	P2 not zero @IPmax
881	P2 not reach 0 @IPmax
882	Air-IN/IPmin P1
883	Pout-1 @ Air-IN/IPmin in pneumatic span test.
884	Air-IN/IPmax P1
885	Pout-1 @ Air-IN/IPmax in pneumatic span test.
886	Air-OUT/IPmin P1
887	Pout-1 @ Air-OUT/IPmin in pneumatic span test.
888	Air-OUT/IPmax P1
889	Pout-1 @ Air-OUT/IPmax in pneumatic span test.
890	Air-IN/IPmin P2
891	Pout-2 @ Air-IN/IPmin in pneumatic span test.
892	Air-IN/IPmax P2
893	Pout-2 @ Air-IN/IPmax in pneumatic span test.
894	Air-OUT/IPmin P2
895	Pout-2 @ Air-OUT/IPmin in pneumatic span test.
896	Air-OUT/IPmax P2
897	Pout-2 @ Air-OUT/IPmax in pneumatic span test.
898	Posi-UP/25%
899	IP-signal @ Air-IN/25%-position in pneumatic drift test.
900	Posi-UP/50%
901	IP-signal @ Air-IN/50%-position in pneumatic drift test.
902	Posi-UP/75%
903	IP-signal @ Air-IN/75%-position in pneumatic drift test.
904	Posi-DN/25%
905	IP-signal @ Air-OUT/25%-position in pneumatic drift test.
906	Posi-DN/50%
907	IP-signal @ Air-OUT/50%-position in pneumatic drift test.
908	Posi-DN/75%
909	IP-signal @ Air-OUT/75%-position in pneumatic drift test.
910	Hysteresis/25%
911	IP-signal @ Hysteresis/25%-position in pneumatic drift test.
912	Hysteresis/50%
913	IP-signal @ Hysteresis/50%-position in pneumatic drift test.
914	Hysteresis/75%
915	IP-signal @ Hysteresis/75%-position in pneumatic drift test.
916	Pout-1@Air-In/25%-pos.
917	Pout-1 @ Air-IN/25%-position in pneumatic drift test.
918	Pout-1@Air-In/50%-pos.
919	Pout-1 @ Air-IN/50%-position in pneumatic drift test.
920	Pout-1@Air-In/75%-pos.
921	Pout-1 @ Air-IN/75%-position in pneumatic drift test.
922	Pout-1@Air-Out/25%-pos.
923	Pout-1 @ Air-OUT/25%-position in pneumatic drift test.
924	Pout-1@Air-Out/50%-pos.
925	Pout-1 @ Air-OUT/50%-position in pneumatic drift test.
926	Pout-1@Air-Out/75%-pos.
927	Pout-1 @ Air-OUT/75%-position in pneumatic drift test.
928	Pout-2@Air-In/25%-pos.
929	Pout-2 @ Air-IN/25%-position in pneumatic drift test.
930	Pout-2@Air-In/50%-pos.
931	Pout-2 @ Air-IN/50%-position in pneumatic drift test.
932	Pout-2@Air-In/75%-pos.
933	Pout-2 @ Air-IN/75%-position in pneumatic drift test.
934	Pout-2@Air-Out/25%-pos.
935	Pout-2 @ Air-OUT/25%-position in pneumatic drift test.
936	Pout-2@Air-Out/50%-pos.
937	Pout-2 @ Air-OUT/50%-position in pneumatic drift test.
938	Pout-2@Air-Out/75%-pos.
939	Pout-2 @ Air-OUT/75%-position in pneumatic drift test.
940	P-hysteresis 25%
941	Pressure hysteresis @ 25%-position in pneumatic drift test.
942	P-hysteresis 50%
943	Pressure hysteresis @ 50%-position in pneumatic drift test.
944	P-hysteresis 75%
945	Pressure hysteresis @ 75%-position in pneumatic drift test.
946	P-average 25%
947	Pressure average @ 25%-position in pneumatic drift test.
948	P-average 50%
949	Pressure average @ 50%-position in pneumatic drift test.
950	P-average 75%
951	Pressure average @ 75%-position in pneumatic drift test.
952	P-gradient 25-50%
953	Pressure gradient @ 25-50%-position in pneumatic drift test.
954	P-gradient 50-75%
955	Pressure gradient @ 50-75%-position in pneumatic drift test.
956	Temperature alarm flag
957	Temperature alarm Unit
958	Temperature alarm unit code
959	Low
960	Temperature alarm low thershold
961	High
962	Temperature alarm high thershold
963	Pressure failure setting flag
964	Deviation alarm flag
965	Threshold
966	Deviation alarm threshold
967	Times
968	Deviation alarm waiting time
969	Position alarm 0%side
970	Position alarm 0%side setting.
971	Lo alarm
972	Position low alarm setting.
973	Position alarm 100%side
974	Position alarm 100%side setting.
975	Hi alarm
976	Position high alarm setting.
977	threshold =
978	Position alarm 0%side threshold
979	Lo alarm threshold =
980	Position alarm 100%side threshold
981	Hi alarm threshold =
982	Diagnosis results / total time
983	Low Position Time
984	Diagnosis results / low position time
985	Low Position Time Percentage
986	Low position time / Up time
987	Time Unit
988	Total Stroke
989	Diagnosis results total stroke
990	Total Direction Change
991	Diagnosis results total direction change
992	Temperature Unit
993	Diagnosis results temperature Unit
994	Maximum Temperature
995	Diagnosis results maximum temperature
996	Minimum Temperature
997	Diagnosis results minimum temperature
998	Test
999	Saveing which test data?
1000	Step response
1001	Save to
1002	Save to which?
1003	Criteria
1004	Total stroke setting value.
1005	Total direction change setting value.
1006	Low position time setting value.
1007	Temperature unit code
1008	Max. temp. time
1009	Max temperature time setting value.
1010	Min. temp. time
1011	Min temperature time setting value.
1012	Password Status
1013	Password
1014	03u
1015	password flag
1016	Password NG
1017	Password OK
1018	PST online enable
1019	Stroke size
1020	Completion stroke
1021	Start stroke
1022	Start time limit
1023	Abort time limit
1024	Time limit for aborting
1025	Abort pressure
1026	pressure limit for aborting
1027	Interval day
1028	Tset interval days
1029	day(s)
1030	Direction
1031	Stroke direction
1032	- minus
1033	+ plus
1034	Invalid value (Stroke size)
1035	Invalid value (Completion stroke)
1036	Invalid value (Start stroke)
1037	Invalid value (Start time limit)
1038	Invalid value (Abort time limit)
1039	Invalid value (Abort pressure)
1040	Invalid value (Interval day)
1041	PST status
1042	Waiting(Stop)
1043	Running
1044	Temporal running by LCD&SW
1045	Temporal running by HART
1046	PST flag
1047	Remaining days
1048	Remaining days to start PST
1049	Input Signal Cal. Setting 4mA
1050	Input Signal(4-20mA) calibration setting 4mA side
1051	04X
1052	Input Signal Cal. Setting 20mA
1053	Input Signal(4-20mA) calibration setting 20mA side
1054	Pressure Sensor
1055	Pressure sensor selection.
1056	Pressure Unit
1057	Pressure unit for calibration setting.
1058	kPa
1059	psi
1060	bar
1061	Lower pressure value
1062	Lower pressure value for calibration.
1063	Upper pressure value
1064	Upper pressure value for calibration.
1065	Lower pressure AD-value (HEX)
1066	Lower pressure AD-value for calibration.
1067	Upper pressure AD-value (HEX)
1068	Upper pressure AD-value for calibration.
1069	balance air lower limit
1070	Balance air lower limit value for pilot relay adjust.
1071	balance air upper limit
1072	Balance air upper limit value for pilot relay adjust.
1073	Input Signal Cal. Set flag
1074	Input signal(4-20mA) calibration set flag
1075	4mA-Side
1076	20mA-Side
1077	Lower or Upper side
1078	Lower or upper side pressure calibration point
1079	Lower side
1080	Upper side
1081	Pressure calibration value
1082	Pressure calibration setting value
1083	In I=
1084	AD value of input current.
1085	Pos S=
1086	AD value of position/sin signal
1087	C=
1088	AD value of position/cos signal
1089	Temp.
1090	AD value of temperature
1091	Air P1=
1092	AD value of supply pressure
1093	P2=
1094	AD value of pressure out-1
1095	P3=
1096	AD value of pressure out-2
1097	Integ. stop pres. flag
1098	Enable pressure to stop integration
1099	Integ. stop pres. value
1100	Data_Save_Restore_Execution_Code
1101	Alarm Clear Check Code
1102	Invalid request
1103	Position Transmitter Setting Mode
1104	Position transmitter signal setting mode
1105	bit0 0=Exit 1=Enter
1106	bit4 0=0%side 1=100%side
1107	Position Transmitter Adjust
1108	Position transmitter adjust(raw value)
1109	Set or Adjust?
1110	Position transmitter set or adjust flag
1111	adjust
1112	set
1113	Position Transmitter Set Value
1114	Position transmitter set value(raw value)
1115	Signal Setting:Position = 0%
1116	Position transmitter signal setting:Position = 0%
1117	Signal Setting:Position = 100%
1118	Position transmitter signal setting:Position = 100%
1119	Date
1120	Date of time stamp
1121	Time of time stamp
1122	Max temperature
1123	Min temperature
1124	Min/Max pressure
1125	Local pressure unit
1126	High sup-pres. alarm setting.
1127	Low sup-pres. alarm setting
1128	Sup-pres. alarm reserve flag
1129	Value
1130	High supply-pressure alarm setting value.
1131	Low supply-pressure alarm setting value.
1132	Password (000-999)
1133	Positioner :
1134	Electronics:
1135	Software :
1136	Versions Write Control flag
1137	Versions write control flag
1138	Positioner version
1139	Electronics version
1140	Software version
1141	Manufacture Date
1142	Manufacture date value (mm/dd/yyyy)
1143	Step time setting for 25% step response test
1144	Step time setting for pneumatic span test
1145	Criteria setting value for pneumatic span test
1146	Ramp time
1147	Ramp time setting for pneumatic drift test
1148	Tolerance
1149	Tolerance setting value for pneumatic drift test
1150	Ramp time setting for valve signature test
1151	Hysteresis limit
1152	Hysteresis limit setting value for valve signature test
1153	Gradient limit H
1154	Gradient high limit setting value for valve signature test
1155	Gradient limit L
1156	Gradient low limit setting value for valve signature test
1157	Air-Out
1158	IP signal lower limit value
1159	Air-In
1160	IP signal upper limit value
1161	Factor
1162	IP signal factor value
1163	IP Signal Output Mode
1164	Torquemotor current mode
1165	Forced output
1166	Temp. correcton
1167	IP Signal Value
1168	Set IP signal value
1169	3u
1170	Virtual SW1
1171	Virtual SW1 setting
1172	bit0
1173	bit1
1174	PID P value x0.1 mode
1175	bit2
1176	bit3
1177	bit4
1178	bit5
1179	PID D value x10 mode
1180	bit6
1181	bit7
1182	Position sensor signal reverse
1183	Virtual SW2
1184	Virtual SW2 setting
1185	bit8
1186	bit9
1187	bit10
1188	bit11
1189	bit12
1190	bit13
1191	bit14
1192	bit15
1193	p
1194	Present p term value
1195	i
1196	Present i term value
1197	Present d term value
1198	BIAS value
1199	Present BIAS value
1200	Present IP signal
1201	25
1202	75
1203	BIAS value for 25% point
1204	BIAS value for 75% point
1205	Offline
1206	Diag. setup
1207	Upload to Device
1208	Download From Device
1209	device icon
1210	PV Analog Channel Saturated
1211	PV Analog Channel Fixed
1212	Wireless
1213	WirelessHART Device
1214	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
1215	Primary
1216	Primary Analog Channel
1217	Secondary
1218	Secondary Analog Channel
1219	Tertiary
1220	Tertiary Analog Channel
1221	Quaternary
1222	Quaternary Analog Channel
1223	Quinary
1224	Quinary Analog Channel
1225	Critical Power Failure
1226	Lock all
1227	Trim not supported
1228	Configuration cannot be changed
1229	Locked by gateway
1230	Analog Input Channel
1231	Analog Output Channel
1232	Secondary Analog Channel Saturated
1233	Tertiary Analog Channel Saturated
1234	Quaternary Analog Channel Saturated
1235	Quinary Analog Channel Saturated
1236	Secondary Analog Channel Fixed
1237	Tertiary Analog Channel Fixed
1238	Quaternary Analog Channel Fixed
1239	Quinary Analog Channel Fixed
1240	Simulation active
1241	The device is in simulation mode and the level output is not representative of the process.
1242	Non-Volatile memory failure
1243	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
1244	Volatile memory error
1245	The RAM memory check is invalid or maybe corrupt
1246	Watchdog reset executed
1247	A watchdog reset has been performed
1248	Voltage conditions out of range
1249	A voltage condition is outside its allowable range
1250	Environmental conditions out of range
1251	An internal or environmental condition is beyond acceptable limits.
1252	Electronic failure
1253	A hardware problem not related to the sensor has been detected.
1254	Subdevice list changed
1255	Duplicate master detected
1256	Capacity Denied
1257	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
1258	Bandwidth allocation pending
1259	Block transfer pending
1260	Battery life
1261	Percent range
1262	Loop current
1263	Primary variable
1264	Secondary variable
1265	Tertiary variable
1266	Quaternary variable
1267	Read receive time
1268	Write date and time
1269	Non-Volatile Clock
1270	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
1271	Clock Uninitialized
1272	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
1273	None
1274	No restrictions
1275	SI Only
1276	Restricted to SI Unit codes only
1277	Process automation device
1278	Discrete device
1279	Hybrid:Process automation+discrete
1280	I/O System
1281	WirelessHART Process automation device
1282	WirelessHART Discrete device
1283	WirelessHART Process automation+discrete
1284	WirelessHART Gateway
1285	WirelessHART Access point
1286	WirelessHART Process adapter
1287	WirelessHART Discrete adapter
1288	WirelessHART enabled handheld/portable maintenance tool
1289	Device Profile
1290	US
1291	United States of America
1292	JP
1293	Japan
1294	DE
1295	Germany
1296	FR
1297	France
1298	ES
1299	Spain
1300	RU
1301	Russian Federation
1302	CN
1303	People's Republic of China
1304	Secondary Master
1305	Primary Master
1306	Device Diagnostic Status 0
1307	Device Diagnostic Status 1
1308	I/O and Subdevice Status
1309	WirelessHART Status
1310	Time Set Option
1311	Real Time Clock Flags
1312	Country
1313	Country of intended device installation
1314	SI Unit Control
1315	Indicates if device should only display SI unit codes
1316	Time Stamp
1317	Relative time value on network
1318	8u
1319	Dynamic Variables Returned for Device Variables
1320	Command Response Truncated
1321	Configuration Change Counter Mismatch
1322	Status bytes mismatch
1323	count
1324	Device Variable
1325	8.3f
1326	.3f
1327	Invalid cotrol mode !!
1328	You are aborting an operation.
1329	Operation aborted.
1330	Please, enter the password to open 'Protected Menu' !!
1331	Password is OK! To open 'Protected Menu', once closing the menu, and open again.
1332	Password is wrong!! You can not open the Protected Menu.
1333	Please, enter the password to open 'Protected menus' !!
1334	Password is OK.
1335	Password is wrong!! You can not open 'Protected menus'.
1336	You are abroting autotune.
1337	Aborting method due to last error
1338	Autotune is canceled.
1339	Method is aborting
1340	Only it can be set when Transfer-func is Equal percent.
1341	Do you want to read or write?
1342	Read;Write
1343	Actuator motion = %{0}
1344	Invalid authority !!
1345	Actuator motion :
1346	Invalid selecltion !! 'rotary' is selected for '5300' type.
1347	Actuator type = %{0}
1348	Actuator type :
1349	Single;Double;5300
1350	Invalid selecltion !! '5300' is selected for 'Rotary' motion.
1351	Unknown type error!!
1352	Valve action = %{0}
1353	Valve action :
1354	Packing friction = %{0}
1355	Packing friction :
1356	Booster option = %{0}
1357	Booster option :
1358	This option can not be changed.
1359	Set point dir. = %{0}
1360	Set point dir. :
1361	Posi. transmit. dir. = %{0}
1362	Posi. transmit. dir. :
1363	You are to start Full Autotune.
1364	Full-Autotune is started.
1365	Setting process aborted!
1366	Aborting method due to last error %{stage}
1367	Ok(set);Move -;Move +
1368	menu_select
1369	Unknown error!!
1370	Setting comlpete!
1371	Aborting method due to last error.
1372	You are to start Span-Autotune.
1373	Span-Autotune is started.
1374	Response tuning = %{0}
1375	Response tuning value:
1376	Which ?
1377	Custom;XS;SS;S;M;L;LL;XL
1378	Custom;XS;SS;S;M;L;LL
1379	Custom;XS;SS;S;M;L
1380	Custom;SS;S;M;L;LL
1381	Custom;XS;SS;S;M
1382	P =
1383	I =
1384	D =
1385	rP =
1386	rI =
1387	rD =
1388	Inside P =
1389	Inside I =
1390	Inside D =
1391	Inside rP =
1392	Inside rI =
1393	Inside rD =
1394	You are to start auto bias & size tuning.
1395	Sensitivity-Autotune is started.
1396	You are to start auto bias tuning.
1397	Bias-Autotune is started.
1398	Cutoff/Limit for 0%-side:
1399	Disable;Cutoff;Limit
1400	Value for 0%-side:
1401	Cutoff/Limit for 100%-side:
1402	Value for 100%-side:
1403	Dead band flag
1404	Disable;Enable
1405	Dead band value
1406	Transfer Function:
1407	Linear;Equal-Percent(low);Equal-Percent(Mid);Equal-Percent(High);Quick-Open;Custom-Definition
1408	Do you want to Read or Write?
1409	You are to Write Custom Curve data.
1410	Table Index is: %{c_no_puls}. Is this used?
1411	Enable;Disable
1412	X%{c_no_puls} =
1413	Y%{c_no_puls} =
1414	Writing is completed.
1415	Rage ability =
1416	Input damper flag:
1417	Input damper factor:
1418	0% =
1419	100% =
1420	PT burnout dir. =
1421	AT span limit =
1422	Integ. stop pres.:
1423	Integ. stop pres. value =
1424	Log Clear: You are to reset diagnosis data.
1425	Log Clear is completed.
1426	Authority :
1427	Control mode :
1428	4-20mA;HART
1429	You want to set password =
1430	You are setting password, don't forget the password!!
1431	Password(000-999) =
1432	work_password
1433	Password is set.
1434	Password will be disabled!!
1435	Screen saver =
1436	Temperature unit :
1437	Aborting method due to temperature unit select error
1438	Pressure unit :
1439	Aborting method due to pressure unit select error
1440	You are perfomrimg input signal calibration.
1441	Set input signal 4.0mA.
1442	Set input signal 20.0mA.
1443	Input signal calibration is completed.
1444	You are perfomrimg corss point calibration.
1445	Ok(set);Down;Up
1446	You are perfomrimg Position Transmitter Calibration
1447	Ok(Return);0%-side;100%-side;
1448	select_menu
1449	Position Transmitter Calibration is done
1450	Ok;Down;Up
1451	You are perfomrimg pressure sensor calibration
1452	Pressure sensor cal.
1453	Set pressure for lower side
1454	Enter pressure value for lower side( %{pressure_calibration_setting_unit} ) :
1455	fwork
1456	Set pressure for upper side
1457	Enter pressure value for upper side ( %{pressure_calibration_setting_unit} ) :
1458	Set Value to Move
1459	Ok(Return);100%-side;0%-side;
1460	You are to perform ramp operation.
1461	Ramp operation is started.
1462	You are to perform step operation.
1463	Step operation is started.
1464	You are to perform data save.
1465	Data save is completed.
1466	You are to perform data restore.
1467	Data restore is completed.
1468	You are setting factory default data. Present setting data will be override.
1469	Present data will be override by factory default data. Are you sure?
1470	Set data to factory default is completed.
1471	Factory menu :
1472	Is the device armed? If no devices are armed, communication will be losted!!
1473	TAG
1474	Descriptor
1475	Long Tag
1476	Message
1477	Final asmbly num
1478	Which variable you want to change?
1479	SV;TV;QV
1480	SV =
1481	TV =
1482	QV =
1483	Reset is completed.
1484	0% side:
1485	iwork_l
1486	100% side:
1487	iwork_h
1488	Read;Write;Erace log
1489	You are reaceing log of total stroke!!
1490	You are reaceing log of total direction change!!
1491	You are reaceing log of low position!!
1492	You are reaceing log of max/min temperature!!
1493	You are clearing diagnosis logs.
1494	You are performing 25% step response.
1495	You are performing pneumatic span test.
1496	You are performing pneumatic drift test.
1497	You are performing simple valve signature.
1498	You are performing PST manually.
1499	Lo alarm :
1500	Lo alarm =
1501	item_low
1502	Hi alarm :
1503	Hi alarm =
1504	item_high
1505	Deviation alarm:
1506	Deviation alarm threshold =
1507	item_value_1
1508	times =
1509	item_value_2
1510	Temperature alarm:
1511	High sup-pres. AL:
1512	Value=
1513	Low sup-pres. AL:
1514	Pressure failure:
1515	Please, enter the password
1516	Password is wrong!!
1517	Position alarm NAMUR status :
1518	Deviation alarm NAMUR status :
1519	Temperature alarm NAMUR status :
1520	High sup-pressure NAMUR status :
1521	Low sup-pressure NAMUR status :
1522	Save as :
1523	Save as :
1524	Ramp operation is about to start. Do you want to continue?
1525	Yes;No
1526	Updating graph data will take time. Please wait till next message...
1527	Updating graph data is completed. Please exit method to see the updated graph
1528	Clearing graph data will take time. Please wait till next message...
1529	Clearing graph data is completed. Please exit method to see the cleared graph
Reference ID	String