Device dictionary

Loading…

Reference ID	String
0	SLN700
1	Honeywell
2	Critical
3	EEProm Error
4	Return to Factory
5	PLL Error
6	PLL Failed, RF circuit failure. return unit to Factory
7	Op Error
8	Internal Operation Error. return unit to Factory
9	CmdCode Error
10	Internal Command Error. return unit to Factory
11	Auth Failed
12	System Busy
13	Restart, if problems persist return unit to Factory
14	Low Power Error
15	Low power supply. Check power supply
16	Dsp Comm Error
17	Communication error between display and module. Replace with new display module
18	Cmd Parse Error
19	Internal command parse error
20	AD Error
21	AD sampling error, Return to Factory
22	Calibration Flash Error
23	RF Calibration Flash Error, Return to Factory
24	DspAuthError
25	DSP Authentication Error. Return to Factory.
26	No Signal Error
27	No signal back,will see no reflective echo on echo curve. Check antenna aiming. Check if the application is having excessive vapor/steam
28	Lock/Unlock Device
29	Distance Value
30	.3f
31	Distance Unit
32	ft
33	m
34	in
35	cm
36	mm
37	Distance Dev fmly
38	Distance Class
39	Minimum Span
40	8.3f
41	Distance Update Period
42
43	7d
44	Simulate
45	Distance To Product
46	Update Period
47	Temperature Value
48	Temperature Unit
49	Temperature Class
50	Temperature Update Period
51	Temperature
52	Distance
53	CmdType
54	GetData
55	SetData
56	simulationUnit
57	Fast Level Change
58	Empty Value
59	Fixed Range
60	Fixed Blind
61	Low Adjuest Value
62	High Adjuest Value
63	Temperature
64	InputVoltage
65	Signal Strength
66	Sensor Tag
67	Measuring Medium Type
68	Measuring Unit
69	User Blind
70	User Range
71	Current Out Mode
72	EFF Curve
73	Echo Curve
74	False Echo Curve
75	Simualte
76	False Echo Distance
77	False Echo Status
78	Failure Mode
79	Reset Factory
80	Distance Adjuest
81	Echo Threshold
82	Damping Factor
83	Envelope Level
84	Hart Poll Addr
85	MultiDrop Option
86	Damping Time
87	Max Level Speed
88	First Echo Option
89	MultiWave
90	IF Gain
91	Tx Power
92	Rx Gain
93	4ma Adjust
94	20mA Adjust
95	Low Dk Option
96	Empty Span
97	Dust Or Agitation
98	Device Type
99	Device ID
100	Data Of Manufacture
101	MB Version
102	DSP Version
103	RF Version
104	LCD Version
105	DistanceTo Product
106	Product Level
107	method7
108	Product Level %
109	%
110	Fixed Range
111	Fixed blind
112	Distance URV
113	Distance LRV
114	degC
115	Input Voltage
116	V
117	Signal Strength
118	dB
119	Sensor tag
120	Medium
121	is used to select liquid, solid to further determine some other properties of the material that affect the measurement
122	Liquid
123	Solid
124	Distance Units
125	Messaure unit
126	Units of Measurement
127	method2
128	Near Blanking
129	When fixed obstacles interferes with the measurement near the sensor surface and the maximum material height does not reach the obstacle, the near blanking setting function can be used to avoid measurement errors.Entered value > Fixed blind and < User range
130	User range
131	Measuring Range (Entered value > Near Blanking and < Fixed range)
132	Sel. Current Output
133	4-20mA
134	4-20mA Current out Mode
135	20-4mA
136	20-4mA Current out Mode
137	Simulation Status
138	Shows the status of Simulation mode ON/OFF
139	OFF
140	open simulate
141	ON
142	close simulate
143	Simualte Value
144	Simualte Loop Current Value
145	Simulate Value
146	Simulate Distance Value
147	.6f
148	Simulate type
149	Current Simulate
150	Empty High Simulate
151	False echo distance
152	False echo status
153	Shows False echo status
154	Busy
155	Idle
156	Burnout Direction
157	Set burnout Current
158	NO Change
159	21.5mA
160	3.6mA
161	Distance Offset
162	Set offset of distance output value
163	Echo Threshold
164	Threshold setting is used to set the threshold size of the effective echo
165	Damping Factor
166	Change percent from One value jump to other value.
167	Envelope Level
168	Set the level of Envelope
169	Poll Address
170	MultiDrop Option
171	Set the fixed current in multidrop mode
172	Normal
173	4mA
174	8mA
175	Damping Time
176	Take average of measurement value as output in this time
177	Max_Level_Speed_Unit
178	ft/s
179	m/s
180	in/s
181	cm/s
182	mm/s
183	Max Level Rate
184	Set max level rate
185	First Echo Option
186	Change the weight of first echo
187	Small
188	Big
189	Bigger
190	Biggest
191	MultiWave
192	Enable multiwave algorithm to get the correct echo
193	No
194	Yes
195	IF Gain
196	Tx Power
197	Weak
198	Rx Gain
199	4ma Adjust
200	20ma Adjust
201	Low Dk Option
202	For Low DK use.To enable low DK bottom algorithm
203	Empty Span
204	If low DK option is yes, Input the bottom distance.Entered value > zero and < Fixed Range
205	Dust Or Agitation
206	Set degree of dust or agitation
207	Mild
208	Strong
209	Model Type
210	Serial Number
211	Date Of Manufacture
212	YYYYMMDD
213	MB Version
214	DSP Version
215	RF Version
216	LCD Version
217	Reset command
218	basic reset
219	factory reset
220	Max. Distance
221	Max. distance after boot up
222	Min. Distance
223	Min. distance after boot up
224	Max. Voltage
225	Max. voltage after boot up
226	Min. Voltage
227	Min. voltage after boot up
228	Hour
229	2.0f
230	8.0f
231	Minute
232	Second
233	.0f
234	h
235	min
236	Echo Lost Timeout
237	Timeout for echo error not found
238	s
239	Calibrate Date
240	Calibrate Date in YYYYMMDD
241	Latching Mode
242	Any error will be latched if enable this mode.
243	Non-Latching
244	Latching
245	Device state
246	StateOk
247	CommErr
248	EEPRom
249	OpErr
250	CmdParseError
251	Auth Err
252	SysBusy
253	LowPower Err
254	DspCommErr
255	AD Err
256	CalibFlashErr
257	CalibFlashErr
258	DspAuth
259	NoSignal Err
260	Write Protect
261	Set to Write Protect Password
262	Measure unit false echo
263	Internal DD Revision
264	DD Rev
265	1.1.0A
266	Locked
267	min. volt time
268	This method shows the min. volt time in HH::MM:SS
269	Service Time
270	This method shows Service Time in HH:MM:SS
271	Show User Range Limits
272	This method shows the user range limits
273	Show Near blanking Limits
274	This method shows the Near blanking limits
275	Show URV Limits
276	This method shows distance URV limits
277	Show LRV Limits
278	This method shows distance LRV limits
279	Show distance Limits
280	This method shows the simulate distance limits
281	Show Max. Level Rate Limits
282	This method shows Max. Level Rate Limits
283	Loop Current Simulation
284	This method used to simulate Loop Current
285	Distance Simulation
286	This method used to simulate Distance
287	Max/Min Distance Reset
288	This method reset min/max distance value
289	Max/Min Voltage Reset
290	This method reset min/max Voltage value
291	Set False Echo Distance
292	This method will set false echo distance
293	Master Reset
294	Soft power reset to the device
295	Factory Reset
296	len1
297	Write Protect On/Off
298	enter password to enable or disable Write Protect
299	Echo curve data
300	False echo curve data
301	EFF echo
302	curve data array
303	Echo Curve(Curve)
304	False Echo Curve
305	EFF_Curve
306	Echo Curve
307	method6
308	EFF Echo
309	Offline[Table View]
310	Diagnostics
311	Maintenance
312	Process Monitoring
313	Offline Configuration
314	My Device
315	Device Setup
316	Basic Configuration
317	General
318	Process
319	Loop Outputs
320	Summary
321	Advanced Configuration
322	Echo Settings
323	Services
324	Monitor
325	Dashboard
326	Device Status
327	Device Information
328	EFF Echo Curve
329	Full Echo Curve
330	Adv Diagnostics
331	Download to Device
332	Upload from Device
333	Upload Variables
334	Device health
335	Overall health of the transmitter
336	Honeywell_Logo
337	PV Analog Channel Saturated
338	PV Analog Channel Fixed
339	Wireless
340	WirelessHART Device
341	IEEE 802.15.4 2.4GHz DSSS with O-QPSK Modulation
342	Primary
343	Primary Analog Channel
344	Secondary
345	Secondary Analog Channel
346	Tertiary
347	Tertiary Analog Channel
348	Quaternary
349	Quaternary Analog Channel
350	Quinary
351	Quinary Analog Channel
352	Critical Power Failure
353	Lock all
354	Trim not supported
355	Configuration cannot be changed
356	Locked by gateway
357	Analog Input Channel
358	Analog Output Channel
359	Secondary Analog Channel Saturated
360	Tertiary Analog Channel Saturated
361	Quaternary Analog Channel Saturated
362	Quinary Analog Channel Saturated
363	Secondary Analog Channel Fixed
364	Tertiary Analog Channel Fixed
365	Quaternary Analog Channel Fixed
366	Quinary Analog Channel Fixed
367	Simulation active
368	The device is in simulation mode and the level output is not representative of the process.
369	Non-Volatile memory failure
370	The Non-Volatile memory check is invalid or maybe corrupt, or the battery of a battery-backed memory has failed.
371	Volatile memory error
372	The RAM memory check is invalid or maybe corrupt
373	Watchdog reset executed
374	A watchdog reset has been performed
375	Voltage conditions out of range
376	A voltage condition is outside its allowable range
377	Environmental conditions out of range
378	An internal or environmental condition is beyond acceptable limits.
379	Electronic failure
380	A hardware problem not related to the sensor has been detected.
381	Subdevice list changed
382	Duplicate master detected
383	Capacity Denied
384	The device was unable to acquire the communication bandwidth required to support the Burst Messaging specified
385	Bandwidth allocation pending
386	Block transfer pending
387	Battery life
388	Percent range
389	Loop current
390	Primary variable
391	Secondary variable
392	Tertiary variable
393	Quaternary variable
394	Read receive time
395	Write date and time
396	Non-Volatile Clock
397	When set the device contains a battery-backed clock. In this case, the clock does not need to be reset if there is a power failure.
398	Clock Uninitialized
399	The real-time clock has never been set with the date and time. For example, the clock is volatile and power was removed from and restored to the device.
400	None
401	No restrictions
402	SI Only
403	Restricted to SI Unit codes only
404	Process automation device
405	Discrete device
406	Hybrid:Process automation+discrete
407	I/O System
408	WirelessHART Process automation device
409	WirelessHART Discrete device
410	WirelessHART Process automation+discrete
411	WirelessHART Gateway
412	WirelessHART Access point
413	WirelessHART Process adapter
414	WirelessHART Discrete adapter
415	WirelessHART enabled handheld/portable maintenance tool
416	Device Profile
417	US
418	United States of America
419	JP
420	Japan
421	DE
422	Germany
423	FR
424	France
425	ES
426	Spain
427	RU
428	Russian Federation
429	CN
430	People's Republic of China
431	Secondary Master
432	Primary Master
433	Device Diagnostic Status 0
434	Device Diagnostic Status 1
435	I/O and Subdevice Status
436	WirelessHART Status
437	Time Set Option
438	Real Time Clock Flags
439	Country
440	Country of intended device installation
441	SI Unit Control
442	Indicates if device should only display SI unit codes
443	Time Stamp
444	Relative time value on network
445	8u
446	Dynamic Variables Returned for Device Variables
447	Command Response Truncated
448	Configuration Change Counter Mismatch
449	Status bytes mismatch
450	min volt time
451	min. volt time (HH:MM:SS): %{Voltage_Hour}:%{Voltage_Minu}:%{Voltage_Sec}
452	Service Time (HH:MM:SS): %{Work_Hour}:%{Work_Minu}:%{Work_Sec}
453	User Range in '%{Measure_unit_local}' : Min. Value : %{User_range.MIN_VALUE} , Max. Value : %{User_range.MAX_VALUE}
454	Near blankig in '%{Measure_unit_local}' : Min. Value : %{User_binld.MIN_VALUE} , Max. Value : %{User_binld.MAX_VALUE}
455	URV Limits in '%{Measure_unit_local}' : Min. Value : %{Low_Adjuest.MIN_VALUE} , Max. Value : %{Low_Adjuest.MAX_VALUE}
456	LRV Limits in '%{Measure_unit_local}' : Min. Value : %{High_Adjuest.MIN_VALUE} , Max. Value : %{High_Adjuest.MAX_VALUE}
457	Simulate distance Limits in '%{Measure_unit_local}' : Min. Value : %{Simulate_Value_Distance.MIN_VALUE} , Max. Value : %{Simulate_Value_Distance.MAX_VALUE}
458	Max Level Rate Limits in '%{Measure_unit_local}' : Min. Value : %{Max_Level_Speed.MIN_VALUE} , Max. Value : %{Max_Level_Speed.MAX_VALUE}
459	Current Simulation
460	Start Simulation;Stop Simulation;Exit
461	Input Value:
462	Start Simulation
463	Stop Simulation
464	Input Value : %{Measure_unit_local}
465	Would you like to do Reset?
466	Succeeded Reset.
467	Failed to Reset.
468	False Echo
469	Please wait,finding false echo operation states
470	Master Reset done
471	Would you like to do Factory Reset?
472	Parameters restoring to factory default values
473	Succeeded Factory Reset.
474	Failed to Factory Reset.
475	Password(6-digtal)
476	Password is incorrect!
477	Please ensure that the device is not in hardware/software write protect mode. WARN-Loop should be removed from automatic control
Reference ID	String