Device dictionary

Loading…

Reference ID	String
0	extended Diagnosis
1	ext.Diag. ERR/Warn
2	ext.Diag errors
3	ext.Diag warnings
4	ext.Diag Register
5	ext.Diag Mode
6	current
7	mode
8	ext.Diag History
9	Coil current
10	Coil voltage
11	Coil resistance
12	Coil temperature
13	Coil isolation resistance
14	Linearity
15	Electrode voltage E1
16	Electrode voltage E2
17	Electrode balance
18	DAC
19	Signal noise ratio
20	ext.Diag Adjust
21	span
22	zero
23	ext.Diag Fingerprint
24	Fingerprint P1 P2
25	Product 1
26	Product 2
27	Fingerprint SU FAC
28	Start up
29	Factory
30	Coil current current
31	6.1f
32	Coil current 1
33	Coil current 2
34	Coil current 3
35	Coil current 4
36	Coil current 5
37	Coil current 6
38	Coil current 7
39	Coil current 8
40	Coil current 9
41	Coil current min
42	Coil current max
43	Coil current min def
44	Coil current min default
45	Coil current max def
46	Coil current max default
47	Coil current P1
48	Coil current Product 1
49	Coil current P2
50	Coil current Product 2
51	Coil current SU
52	Coil current Start up
53	Coil current Fac
54	Coil current Factory settings
55	Coil current status
56	Coil current status
57	Off
58	Warning
59	Error
60
61	Coil voltage current
62	V
63	6.2f
64	Coil voltage 1
65	Coil voltage 2
66	Coil voltage 3
67	Coil voltage 4
68	Coil voltage 5
69	Coil voltage 6
70	Coil voltage 7
71	Coil voltage 8
72	Coil voltage 9
73	Coil voltage min
74	Coil voltage max
75	Coil voltage min def
76	Coil voltage min default
77	Coil voltage max def
78	Coil voltage max default
79	Coil voltage P1
80	Coil voltage Product 1
81	Coil voltage P2
82	Coil voltage Product 2
83	Coil voltage SU
84	Coil voltage Start up
85	Coil voltage Fac
86	Coil voltage Factory settings
87	Coil voltage status
88	Coil voltage status
89	Coil resistance current
90	Coil resistance 1
91	Coil resistance 2
92	Coil resistance 3
93	Coil resistance 4
94	Coil resistance 5
95	Coil resistance 6
96	Coil resistance 7
97	Coil resistance 8
98	Coil resistance 9
99	Coil resistance min
100	Coil resistance max
101	Coil resistance min def
102	Coil resistance min default
103	Coil resistance max default
104	Coil resistance P1
105	Coil resistance Product 1
106	Coil resistance P2
107	Coil resistance Product 2
108	Coil resistance SU
109	Coil resistance Start up
110	Coil resistance Fac
111	Coil resistance Factory settings
112	Coil resistance status
113	Coil resistance status
114	Coil temperature current
115	Coil temperature 1
116	Coil temperature 2
117	Coil temperature 2
118	Coil temperature 3
119	Coil temperature 4
120	Coil temperature 5
121	Coil temperature 6
122	Coil temperature 7
123	Coil temperature 8
124	Coil temperature 9
125	Coil temperature min
126	Coil temperature max
127	Coil temperature min def
128	Coil temperature min default
129	Coil temperature max def
130	Coil temperature max default
131	Coil temperature P1
132	Coil temperature Product 1
133	Coil temperature P2
134	Coil temperature Product 2
135	Coil temperature SU
136	Coil temperature Start up
137	Coil temperature Fac
138	Coil temperature Factory settings
139	Coil temperature status
140	Coil temperature status
141	Coil isolation resistance current
142	MOhm
143	Coil isolation resistance 1
144	Coil isolation resistance 2
145	Coil isolation resistance 2
146	Coil isolation resistance 3
147	Coil isolation resistance 4
148	Coil isolation resistance 5
149	Coil isolation resistance 6
150	Coil isolation resistance 7
151	Coil isolation resistance 8
152	Coil isolation resistance 9
153	Coil isolation resistance min
154	Coil isolation resistance max
155	Coil isolation resistance min def
156	Coil isolation resistance min default
157	Coil isolation resistance max def
158	Coil isolation resistance max default
159	Coil isolation resistance P1
160	Coil isolation resistance Product 1
161	Coil isolation resistance P2
162	Coil isolation resistance Product 2
163	Coil isolation resistance SU
164	Coil isolation resistance Start up
165	Coil isolation resistance Fac
166	Coil isolation resistance Factory settings
167	Coil isolation resistance status
168	Coil isolation resistance status
169	Linearity current
170	Linearity 1
171	Linearity 2
172	Linearity 2
173	Linearity 3
174	Linearity 4
175	Linearity 5
176	Linearity 6
177	Linearity 7
178	Linearity 8
179	Linearity 9
180	Linearity min
181	Linearity max
182	Linearity min def
183	Linearity min default
184	Linearity max def
185	Linearity max default
186	Linearity P1
187	Linearity Product 1
188	Linearity P2
189	Linearity Product 2
190	Linearity SU
191	Linearity Start up
192	Linearity Fac
193	Linearity Factory settings
194	Linearity status
195	Linearity status
196	Electrode voltage E1 current
197	Electrode voltage E1 1
198	Electrode voltage E1 2
199	Electrode voltage E1 2
200	Electrode voltage E1 3
201	Electrode voltage E1 4
202	Electrode voltage E1 5
203	Electrode voltage E1 6
204	Electrode voltage E1 7
205	Electrode voltage E1 8
206	Electrode voltage E1 9
207	Electrode voltage E1 min
208	Electrode voltage E1 max
209	Electrode voltage E1 min def
210	Electrode voltage E1 min default
211	Electrode voltage E1 max def
212	Electrode voltage E1 max default
213	Electrode voltage E1 P1
214	Electrode voltage E1 Product 1
215	Electrode voltage E1 P2
216	Electrode voltage E1 Product 2
217	Electrode voltage E1 SU
218	Electrode voltage E1 Start up
219	Electrode voltage E1 Fac
220	Electrode voltage E1 Factory settings
221	Electrode voltage E1 status
222	Electrode voltage E1 status
223	Electrode voltage E2 current
224	Electrode voltage E2 1
225	Electrode voltage E2 2
226	Electrode voltage E2 2
227	Electrode voltage E2 3
228	Electrode voltage E2 4
229	Electrode voltage E2 5
230	Electrode voltage E2 6
231	Electrode voltage E2 7
232	Electrode voltage E2 8
233	Electrode voltage E2 9
234	Electrode voltage E2 min
235	Electrode voltage E2 max
236	Electrode voltage E2 min def
237	Electrode voltage E2 min default
238	Electrode voltage E2 max def
239	Electrode voltage E2 max default
240	Electrode voltage E2 P1
241	Electrode voltage E2 Product 1
242	Electrode voltage E2 P2
243	Electrode voltage E2 Product 2
244	Electrode voltage E2 SU
245	Electrode voltage E2 Start up
246	Electrode voltage E2 Fac
247	Electrode voltage E2 Factory settings
248	Electrode voltage E2 status
249	Electrode voltage E2 status
250	Electrode balance current
251	Electrode balance 1
252	Electrode balance 2
253	Electrode balance 2
254	Electrode balance 3
255	Electrode balance 4
256	Electrode balance 5
257	Electrode balance 6
258	Electrode balance 7
259	Electrode balance 8
260	Electrode balance 9
261	Electrode balance min
262	Electrode balance max
263	Electrode balance min def
264	Electrode balance min default
265	Electrode balance max def
266	Electrode balance max default
267	Electrode balance P1
268	Electrode balance Product 1
269	Electrode balance P2
270	Electrode balance Product 2
271	Electrode balance SU
272	Electrode balance Start up
273	Electrode balance Fac
274	Electrode balance Factory settings
275	Electrode balance status
276	Electrode balance status
277	DAC current
278	DAC 1
279	DAC 2
280	DAC 2
281	DAC 3
282	DAC 4
283	DAC 5
284	DAC 6
285	DAC 7
286	DAC 8
287	DAC 9
288	DAC min
289	DAC max
290	DAC min def
291	DAC min default
292	DAC max def
293	DAC max default
294	DAC P1
295	DAC Product 1
296	DAC P2
297	DAC Product 2
298	DAC SU
299	DAC Start up
300	DAC Fac
301	DAC Factory settings
302	DAC status
303	DAC status
304	Signal/Noise ratio current
305	Signal noise ratio 1
306	Signal/Noise ratio 1
307	Signal noise ratio 2
308	Signal/Noise ratio 2
309	Signal noise ratio 3
310	Signal/Noise ratio 3
311	Signal noise ratio 4
312	Signal/Noise ratio 4
313	Signal noise ratio 5
314	Signal/Noise ratio 5
315	Signal noise ratio 6
316	Signal/Noise ratio 6
317	Signal noise ratio 7
318	Signal/Noise ratio 7
319	Signal noise ratio 8
320	Signal/Noise ratio 8
321	Signal noise ratio 9
322	Signal/Noise ratio 9
323	Signal noise ratio min
324	Signal/Noise ratio min
325	Signal noise ratio max
326	Signal/Noise ratio max
327	Signal noise ratio min def
328	Signal/Noise ratio min default
329	Signal noise ratio max def
330	Signal/Noise ratio max default
331	Signal noise ratio P1
332	Signal noise ratio Product 1
333	Signal noise ratio P2
334	Signal noise ratio Product 2
335	Signal noise ratio SU
336	Signal noise ratio Start up
337	Signal noise ratio Fac
338	Signal noise ratio Factory settings
339	Signal noise ratio status
340	Signal/Noise ratio status
341	Mass short circuit coil status
342	Ground short-circuit Coil status
343	Short circuit coil status
344
345	Coil not connected status
346	Electrodes state status
347	Electrodes state
348	electrodes not connected status
349	Wrk hrs Converter
350	Working hours converter current
351	h
352	Wrk hrs Converter 1
353	Working hours converter 1
354	Wrk hrs Converter 2
355	Working hours converter 2
356	Wrk hrs Converter 3
357	Working hours converter 3
358	Wrk hrs Converter 4
359	Working hours converter 4
360	Wrk hrs Converter 5
361	Working hours converter 5
362	Wrk hrs Converter 6
363	Working hours converter 6
364	Wrk hrs Converter 7
365	Working hours converter 7
366	Wrk hrs Converter 8
367	Working hours converter 8
368	Wrk hrs Converter 9
369	Working hours converter 9
370	Wrk hrs Converter P1
371	Working hours Converter Product 1
372	Wrk hrs Converter P2
373	Working hours Converter Product 2
374	Wrk hrs Converter SU
375	Working hours Converter Start up
376	Wrk hrs Converter Fac
377	Working hours Converter Factory setting
378	Wrk hrs Primary
379	Working hours primary current
380	Wrk hrs Primary 1
381	Working hours primary 1
382	Wrk hrs Primary 2
383	Working hours primary 2
384	Wrk hrs Primary 3
385	Working hours primary 3
386	Wrk hrs Primary 4
387	Working hours primary 4
388	Wrk hrs Primary 5
389	Working hours primary 5
390	Wrk hrs Primary 6
391	Working hours primary 6
392	Wrk hrs Primary 7
393	Working hours primary 7
394	Wrk hrs Primary 8
395	Working hours primary 8
396	Wrk hrs Primary 9
397	Working hours primary 9
398	Wrk hrs Primary P1
399	Working hours Primary Product 1
400	Wrk hrs Primary P2
401	Working hours Primary Product 2
402	Wrk hrs Primary SU
403	Working hours Primary Start up
404	Wrk hrs Primary Fac
405	Working hours Primary Factory setting
406	ext.diagnosis values
407	extended diagnosis values current, history and fingerprints
408	device busy
409	working hours
410	working hours primary and converter current, history and fingerprints
411	min/max values
412	extended diagnosis variables min/max and min/max default values
413	Err.ext.Diag 1
414	Coil Current min
415	Coil Current max
416	Coil Voltage min
417	Coil Voltage max
418	Coil Resist. min
419	Coil Resist. max
420	Coil Temp. min
421	Coil Temp. max
422	Err.ext.Diag 2
423	Coil Iso.Res. min
424	Coil Iso.Res. max
425	Elect.Volt.E1 min
426	Elect.Volt.E1 max
427	Elect.Volt.E2 min
428	Elect.Volt.E2 max
429	Err.ext.Diag 3
430	Elect.Balance min
431	Elect.Balance max
432	Signalquality min
433	Signalquality max
434	Err.ext.Diag 4
435	Mass short circuit Coil
436	Electrodes state
437	Err.ext.Diag 5
438	not defined
439	Err.ext.Diag 6
440	Warn.ext.Diag 1
441	Warn.ext.Diag 2
442	Warn.ext.Diag 3
443	Warn.ext.Diag 4
444	Warn.ext.Diag 5
445	Warn.ext.Diag 6
446	Reg.ext.Diag 1
447	Reg.ext.Diag 2
448	Reg.ext.Diag 3
449	Reg.ext.Diag 4
450	Reg.ext.Diag 5
451	Reg.ext.Diag 6
452	reserved
453	col diag_variables
454	extended diagnosis variables
455	Start Diagnosis manual
456	Copy current to p1
457	Copy current to p2
458	Copy current to start up
459	Set to default
460	Set all to default
461	Reset
462	Transfer electrode zero
463	Transfer reference resistance
464	Noise reduction
465	Noise red. Off
466	Noise red. 1
467	Noise red. 2
468	Noise red. 3
469	Noise red. 4
470	Error 3 mask
471	Error 3 mask
472	off
473	on
474	Error 4 mask
475	Error 4 mask
476	Start Diagnosis
477	Mode of starting extendeg diagnosis.Using an interval or starting manually
478	Manual
479	10s
480	60s
481	10min
482	60min
483	6h
484	12h
485	24h
486	7d
487	Hardware
488	detects the Hardware revision
489	B-Hardware
490	C-Hardware
491	Cable length
492	8.3f
493	Reference resistance
494	Reference resistance at 20 °C
495	Temperature offset
496	Value Electr. Volt. E1
497	Value Electrode Voltage E1
498	Angle Electr. Volt. E1
499	Angle Electrode Voltage E1
500	Value Electr. Volt. E2
501	Value Electrode Voltage E2
502	Angle Electr. Volt. E2
503	Angle Electrode Voltage E2
504	Value Electr. zero E1
505	Value Electrode zero E1
506	Angle Electr. zero E1
507	Angle Electrode zero E1
508	Value Electr. zero E2
509	Value Electrode zero E2
510	Angle Electr. zero E2
511	Angle Electrode zero E2
512	Meter
513	°Celsius
514	Ohm
515	Mega-Ohm
516	Volt
517	Micro-Volt
518	µV
519	microvolt
520	Grad
521	FSM4000
522	ABB
523	Errors 1
524	empty pipe
525	A/D-converter
526	Driver
527	Flow > 105%
528	Zero return
529	Database
530	Totalizer
531	high Alarm
532	Errors 2
533	low Alarm
534	ext.Database
535	ext.FRAM
536	old primary
537	DC to high
538	Error ext.Diag.
539	Status 2
540	Functiontest on
541	Q-Simulation on
542	autom. Adjust
543	Error autom.Adj.
544	Result functiont.
545	Sim.Err/Warn.ext.Diag.
546	Status 1
547	Test IOUT 1
548	Test IOUT 2
549	Test contactoutp
550	Test Pulseoutput
551	Adjust IOUT 1
552	Adjust IOUT 2
553	Test contactinp.
554	Warnings 1
555	ext.Total. reset
556	Simulation
557	Test mode
558	Functiontest
559	Overflow F
560	Overflow R
561	Overflow diff.
562	reverse flow Q
563	Warnings 2
564	Prim.data loaded
565	Update int.FRAM
566	Update ext.FRAM
567	Poll.Addr. > 0
568	Simulation IOUT
569	Simulat. Pulse
570	hold - MV
571	Warnings 3
572	Warn. ext.Diag.
573	Error Memory 1
574	M:empty pipe
575	M:A/D-converter
576	M:Driver
577	M:Flow > 105%
578	M:Zero return
579	M:Database
580	M:Totalizer
581	M:high Alarm
582	Error Memory 2
583	M:low Alarm
584	M:ext.Database
585	M:ext.FRAM
586	M:old primary
587	M:DC to high
588	M:Error ext.Diag.
589	.2f
590	Damping
591	Response time 1t = 0-67% for a step flow change.
592	.3f
593	6.3f
594	To>F
595	To<R
596	Unit Qmax
597	ml/s
598	Mililiter per second
599	ml/min
600	Mililiter per minute
601	spcl/s
602	programable unit per second
603	spcl/min
604	programable unit per minute
605	spcl/h
606	programable unit per hour
607	spcl/day
608	programable unit per day
609	Unit totalizer
610	ml
611	Mililiter
612	spcl
613	programable unit
614	Flow Sensor- Hardware that measures flow rate.
615	Gross Total- Non-resettable totalizer.
616	Reverse Total- Non-resettable reverse totalizer.
617	Diff.total
618	Diferential Total- Non-resettable reverse totalizer.
619	Diagnosis
620	Errors
621	Error memory
622	Warnings
623	Status
624	Device Info
625	Operating
626	Units
627	special unit
628	Operating config.
629	System zero
630	Display mode
631	Alarms
632	Primary
633	Converter
634	Functiontest
635	ToD
636	Total difference totalizer value.
637	Fl
638	ToF
639	ToR
640	ToD
641	µs
642	mikrosecond
643	Language
644	Selection of the menu language.
645	German
646	English
647	French
648	Finnish
649	Spain
650	Italian
651	Dutch
652	Danish
653	Swedish
654	Turkish
655	Metersize
656	Display of the flowmeter primary size. Selection only available when connected to Older Models.
657	1 mm 1/25 in
658	1,5 mm 1/17 in
659	2 mm 1/12 in
660	3 mm 1/10 in
661	4 mm 5/32 in
662	6 mm 1/4 in
663	8 mm 5/16 in
664	10 mm 3/8 in
665	15 mm 1/2 in
666	20 mm 3/4 in
667	25 mm 1 in
668	32 mm 1-1/4 in
669	40 mm 1-1/2 in
670	50 mm 2 in
671	65 mm 2-1/2 in
672	80 mm 3 in
673	100 mm 4 in
674	125 mm 5 in
675	150 mm 6 in
676	200 mm 8 in
677	250 mm 10 in
678	300 mm 12 in
679	350 mm 14 in
680	400 mm 16 in
681	450 mm 18 in
682	500 mm 20 in
683	600 mm 24 in
684	700 mm 28 in
685	750 mm 30 in
686	800 mm 32 in
687	900 mm 36 in
688	1000 mm 40 in
689	Selection of the units for the volume and mass flowrate measurements. The units are used for Range max., Qmax and the instantaneous display value when direct reading engineering units have been selected for the display.
690	Selections of the engineering totalizer unit for the volume and mass flowrate measurements.
691	Prog. Unit
692	Configurable units for mass (with density) or volume flowrate (without density).
693	without density
694	with density
695	Contact output
696	The switch mode for the contact output (terminals 41/42) can be selected as normally open or normally closed.
697	No Function
698	F/R-Signal /_
699	F/R-Signal __
700	General-Alarm /_
701	General-Alarm __
702	Max/Min Alarm /_
703	Max/Min Alarm __
704	Min Alarm /_
705	Min Alarm __
706	Max Alarm /_
707	Max Alarm __
708	Empty pipe /_
709	Empty pipe __
710	ext.Diag Alarm /_
711	ext.Diag Alarm __
712	Contact input
713	Selection of the function for the contact input terminals 81/82.
714	No Function
715	Totalizer reset
716	Zero return
717	Ext.Syst.zero
718	Iout at Alarm
719	Value of the current during an error condition.
720	High Alarm
721	Low Alarm
722	Detector e.pipe
723	On/Off selection for the operation Detector empty pipe.
724	On
725	Alarm e.pipe
726	When the meter tube is empty an indication is displayed and a signal is sent to the terminals when the alarm setting is on. No alarm contact when the Alarm setting is off.
727	Iout at e.pipe
728	Current output value Low or High during an empty pipe condition.
729	0%
730	Simulation Mode
731	Turn flowrate simulation on /off.
732	Test Mode
733	Only for checking the converter with simulator 55XC4000.
734	1st line
735	Selection for the 1st display line.
736	Q [percent]
737	Q [unit]
738	Iout [mA]
739	Q [m/s]
740	Q Bargraph
741	Totalizer
742	Totalizer >F
743	Totalizer <R
744	Totalizer Diff.
745	Tag number
746	Empty pipe
747	Blanks
748	Fprt Product 1
749	Fprt Product 2
750	Fprt Start up
751	Fprt Fact.set.
752	Hist.max error
753	Hist.min error
754	Curr.max error
755	Curr.min error
756	Curr.max warn
757	Curr.min warn
758	Connect warning
759	Connect Error
760	2nd line
761	Selection for the 2nd display line.
762	3rd line
763	Selection for the 3rd display line.
764	4th line
765	Selection for the 4th display line.
766	Operating mode
767	Operating mode Normal: is selected for continuous flow metering. Operating mode Fast: accelerated flow signal processing (e.g. short batches). Operating Mode Piston Pump: for pulsating flows. In this operating mode the improved reproducibility of the flow signal measurements is archieved. The totalizer is automatically set to the Difference Totalizer mode. Any reverse flow which may occur is automatically substracted from the totalizer values.
768	Standard
769	Piston Pump
770	Fast
771	Flow indication
772	Selection of the flow direction to be metered, forward/reverse or forward only. The direction indicator R in the display blinks when flowrate is in the reverse flow direction and 0% is displayed.
773	Forward/Reverse
774	Forward
775	Flow direction
776	Normal/Inverse, reverse the flow direction forward and reverse flow display.
777	Inverse
778	Type of Primary
779	Selection the flowmeter primary type connected to the converter.
780	SE2_,SE4_
781	DS2_
782	DS4_
783	10DS3111(A-C)
784	10DS3111(E- )
785	10D1422
786	10D1425
787	10DS3111 D
788	none
789	10D1462/72
790	SE21 50Hz
791	Frequency Primary
792	Selects the excitation of primary
793	Primary 70Hz
794	Oldprim. 50 Hz
795	Oldprim. 60 Hz
796	Prim. SE 50 Hz
797	Poll.addr.
798	An adress 0-15 can be selected for instruments with the HART-Protocol. If the adress 0 is entered, then the current output varies as the flowrate in the range of 4-20 mA. If additional instruments are connected to the bus and a adress 1-15 is entered, the converter operates in Multidrop-Mode. The current output is fixed at constant 4mA. The output values are then only can only be read using the HART-Communication.
799	Selection 1 large and 1 small line or 4 small lines.
800	1 big, 1 small
801	4 small
802	Contrast
803	Setting the display contrast, STEP = darker; DATA = lighter.
804	Communication
805	Turn HART -Communication on and off.
806	no Function
807	HART
808	Driver
809	Selects the mode of the driver
810	Regularization
811	Controller
812	The calibrating mode 0 or 255 can be select. With mode 0 the primarys SE2_/SE4_ are calibrated together with converter. The meter size and adjusted value are primary accompanying. At mode 255 the converter can delivered to connect with old primary model, Cs = 100% and Cz = 0% be printed on the FRAM. The customer can select meter size and excitation frequency with ENTER. The EASY SETUP for a old primary must be followed for operation.
813	Line frequency
814	Selection of the line frequency of the flowmeter primary was calibrated. Selection 50/60 Hz only available for Older Models.
815	50 Hz
816	60 Hz
817	Startup Commu.
818	With a TTL-Signal the communication type HART or ASCII can be selected of the service plug for the connection.
819	START-HART-TTL
820	START-ASCII-TTL
821	Function test for the pulse output.
822	Current output
823	Selection of the current output range. For HART-Protocol always 4-20 mA.
824	0-20 mA
825	4-20 mA
826	0-10 mA
827	2-10 mA
828	Com. Type TTL
829	The choice of the occupancy of the communication for the service plug can be returned. Communication HART- TTL or ASCII-TTL can be switched over to on display operate function.
830	HART-TTL
831	ASCII-TTL
832	Display on
833	Pulse (act/pas)
834	Indication of the jumper position for pulse output active or passive.
835	activ
836	passive
837	Actu. Variant
838	The present factory-made for pulse output and communication. it can be identified by the order.
839	Puls active not Hart
840	Puls active with Hart
841	Puls passive not Hart
842	Puls passive with Hart
843	Variant error
844	Pulse active not HART CHW
845	Pulse active with HART CHW
846	Pulse passive not HART CHW
847	Pulse passive with HART CHW
848	The status condition of the contact input can be viewed on or off.
849	The test function contact ouput and with ENTER the function can be switched to on or off:
850	EPD Mode
851	Selection of the function standard or new adjustment. At standard is isn't required to carry out a adjustment on side. The converter use standard adjustment datas. If it comes to disturbances through the medium or an empty pipe isn't recognized by the converter, a new adjustment must be carried out on side, see adjustment empty pipe or full pipe.
852	Standard
853	New Adjust
854	self-excitation??
855
856	Collection char variables
857	Help char variables
858	prot.cust.trans
859	Overflow counter max. 250. 1 overflow = pulse totalizer 9.999.999 units. Display value is reset and one overflow is counted.
860	5u
861	Mains interrupt
862	Mains interrupt counter.
863	?????????????????
864	Instrument No.
865	Instrument number continuously
866	DAC Amp.
867	Min DAC Amp.
868	Max DAC Amp.
869	Testrig
870	Display Test rig number.
871	DSP Reset
872	Totalization of reset from the DSP electronic.
873	Pg.prot.code
874	When a 0 (factory setting) is entered the program protection is turned off. If a different Progr. Prot. Code has been configured (1-9999), then the operator will be asked for the PP-Code when this level is selected.
875	Overflow D
876	Display of the Overflow counter for the Difference Totalizer.
877	5d
878	col ui_var
879	help unsigned integer variables
880	Cal-fact 10m/s
881	Display of the max. possible flow range. Automatic selection based on the meter size.
882	Qmax
883	Flow range end value for forward and reverse flowrate. Flow range end values can be set between 0.5 and 10 m/s.
884	Pulse factor
885	Pulse factor 0.001 to 1000 pulses per selected unit for the internal and external flow totalization, max. count frequency 5 kHz. The max. count frequency and the pulse factor are checked in the software. If incorrect an error is displayed.
886	Pulse width
887	For external pulse output range pulse width 0.1 to 2000ms. The max. allowable pulse width is checked in the software and corrected if required.
888	ms
889	Low flow cut off
890	Applies to the values displayed and all outputs. The switch point has a built in hysteresis of 0.1%.
891	Density
892	Density range 0.1 - 5 g/cm3. Mass flowrate for the display and the totalizer.
893	Unit factor
894	Factor for the configurable flowrate based on liters; factor shown is for kgal units (factory default setting).
895	8.4f
896	Adj. full pipe
897	Display of the adjusted value for a full pipe. The adjustment for the full pipe can be made manually or automatically.
898	Total forward totalizer value.
899	7.4f
900	Total reverse totalizer value.
901	Zero Adjust
902	Flowmeter primary zero value Cz. For Older Models always 0 %
903	Span Adjust
904	Flowmeter primary span value Cs. For Older Models always 100 %
905	Phase
906	Phase between reference and signal voltage.
907	Adjust Iout 4mA
908	Display of the adjusted Iout value for 4.0 mA.
909	Adjust Iout 20mA
910	Display of the adjusted Iout value for 20.0 mA.
911	Channel
912	Span Adjust ->V
913	Span Adjust <-R
914	Channel Adjust
915	Threshold
916	Display of the calculated Threshold value or manually entry.
917	Iout Low Alarm
918	Low Alarm only available for current output 2-10 mA or 4-20 mA. Value of the current output for Low Alarm.
919	Iout High Alarm
920	Value of the current output for High Alarm. If error 3 (flow > 105 %) occurs, the current output is always set to High Alarm
921	Simulation Value
922	The flowrate value displayed can be simulated by pressing STEP or DATA button. The current and pulse outputs follow the simulated flowrate values.
923	???????????
924	Referencevoltage
925	Delta Amp.
926	Min. Alarm
927	Range limit for the Min. Alarm, range 0-105 % of the selected flow range. Set in 1 % steps, switch hysteresis 1 %
928	.0f
929	Max. Alarm
930	Range limit for the Max. Alarm, range 0-105 % of the selected flow range. Set in 1 % steps, switch hysteresis 1 %
931	Threshold On
932	Threshold Off
933	Output Cycle
934	Input of the time for the indication block of the selected parameter function 0,1-100 s.
935	????????????
936	Range - Pulse
937	The extended pulse rate for the measurement range up to Qmax. DN.
938	Adj. empty pipe
939	Display of the adjusted value for a empty pipe. The pipeline must be empty.
940	Threshold for turning off empty pipe.This is calculated and typed in internally after adjustment empty pipe or full pipe.The response time is reduced at a manual entry at empty regular measuring pipe at smaller entry values.
941	Collection float variables
942	Help float variables
943	Primary Tag
944	A TAG-Number for the primary can be displayed or enter max. 30-characters.
945	Converter Tag
946	A TAG-Number for the converter can be displayed or enter max. 30-characters.
947	Calib.Date
948	Display Date of the calibration
949	Order-Number
950	Order number of the Instruments
951	Version
952	Tester
953	Units name
954	Four character name for the user configurable units, kgal = factory default setting.
955	Collection string variables
956	Help string variables
957	Collection Reset Functions
958	Help Reset Functions
959	Collection Adjust Functions
960	Help Adjust Functions
961	50s Average
962	After start with ENTER a average flow value is started and shown over 50s
963	Set Totl.forward
964	Set Totl.reverse
965	Set Totl.diff.
966	Reset Totalizer
967	Reset Error regist
968	Reset Conf.changed
969	PS-Code
970	Test Contact outp.
971	no Test Contact output
972	Test Contact input
973	no Test Contact input
974	Test Memory
975	Test Pulse Output
976	Abort Test Pulse Output
977	Test QSimulation
978	Abort Test QSimulation
979	Adj.EPD full pipe
980	Adj.EPD empty pipe
981	Edit Pulse Factor
982	Edit Pulse Width
983	Auto.adj.Sys.zero
984	Collection Memory test Functions
985	Help Memory test Functions
986	upload variables
987	Rueger
988	Mettler Toledo
989	Det-Tronics
990	TN Technologies
991	DeZURIK
992	Phase Dynamics
993	WELLTECH SHANGHAI
994	ENRAF
995	4tech ASA
996	Brandt Instrument
997	Nivelco
998	Camille Bauer
999	Metran
1000	Milton Roy Co.
1001	PMV
1002	Turck
1003	Panametrics
1004	Stahl
1005	Fieldbus International
1006	BERTHOLD
1007	InterCorr
1008	China BRICONTE Co Ltd
1009	Electron Machine
1010	Sierra Instruments
1011	Fluid Componenets
1012	HART Communication Foundation
1013	PSK Capable Device
1014	PSK With Loop Current Signaling Disabled
1015	Disabled
1016	Enabled
1017	Maintenance Required
1018	Device Variable Alert
1019	Lock Device Codes
1020	Unlock
1021	Temporary Lock
1022	Permanent Lock
1023	Write Device Variable Codes
1024	Normal
1025	Fix Value
1026	Device Variable Family Codes
1027	Temperature
1028	Pressure
1029	Actuator
1030	Simple PID
1031	pH
1032	Conductivity
1033	Totalizer
1034	Device Variable not Classified
1035	Volumetric Flow
1036	Velocity
1037	Volume
1038	Length
1039	Time
1040	Mass
1041	Mass Flow
1042	Mass per Volume
1043	Viscosity
1044	Angular Velocity
1045	Area
1046	Energy (Work)
1047	Force
1048	Power
1049	Frequency
1050	Analytical
1051	Current
1052	Resistance
1053	Angle
1054	Conductance
1055	Volume per Volume
1056	Volume per Mass
1057	Concentration
1058	Valve Actuator
1059	Trim Point Codes
1060	Lower Trim Point Supported
1061	Upper Trim Point Supported
1062	Lower and Upper Trim Point Supported
1063	Capture Mode Codes
1064	Enabled - Capture From Specified Field Device
1065	Enabled - Capture from BACK messages
1066	Physical Layer Type Codes
1067	Asynchronous (FSK)
1068	Synchronous (PSK)
1069	Lock Device Status Codes
1070	Device is Locked
1071	Lock is Permanent
1072	Locked by Primary Master
1073	Channel Flags
1074	Input Channel
1075	Process Data Status
1076	Bad
1077	Manual / Fixed
1078	Poor Accuracy
1079	Good
1080	Limit Status
1081	Not Limited
1082	Low Limited
1083	High Limited
1084	Constant
1085	Device Family Status
1086	More Device Family Status Available
1087	FMU860
1088	DT
1089	DVC
1090	FCX
1091	AS800
1092	340T
1093	340C
1094	344
1095	Siemens Micro K
1096	SITRANS L
1097	SIPAN PH
1098	SITRANS P
1099	75SMT
1100	UNIDELTA
1101	8320
1102	SX5100
1103	TSV175
1104	DMU
1105	3780
1106	BM70
1107	Extended Device Status
1108	Provides additional Device Status information
1109	Loop Current Mode
1110	Indicates whether the loop current is active or fixed (i.e., the device is in multi-drop)
1111	8u
1112	4.2f
1113	Pulse Output Unit- Engineering units that the frequency andtotalizer outputs will be displayed with.
1114	Gross Total Value- Non-resettable totalizer value. Counts frequency output pulses while total control is turned on. This value will be reset to 0 when the pulse scaling, line size, or units are changed.
1115	Reverse Total Value- Non-resettable totalizer value. Counts frequency output pulses while total control is turned on and flow is in the reverse direction. This value will be reset to 0 when the pulse scaling, line size, or units are changed.
1116	Pulse output units- Engineering units that the frequency and totalizer outputs will be displayed with
1117	Gross Total Value- Counts frequency output pulses while total control is turned on. This value will be reset to 0 when the pulse scaling, line size, or units are changed
1118	Reverse Total Value- Counts frequency output pulses while total control is turned on and flow is in the reverse direction. This value will be reset to 0 when the pulse scaling, line size, or units are changed
1119	Pulse output- scaled frequency output from 0-1000 Hz, linear with input.
1120	Net Total Value- Resettable totalizer.
1121	Start extended Diagnosis
1122	Really copy current diagnosis data to product 1?
1123	current diagnosis data copied to product 1
1124	Really copy current diagnosis data to product 2?
1125	current diagnosis data copied to product 2
1126	Really copy current diagnosis data to start up?
1127	current diagnosis data copied to start up
1128	Set min/max-value to default?
1129	Min value = %{0} Max value = %{1}
1130	Set all min/max values to default and all mode to off?
1131	processing: coil current
1132	processing: coil voltage
1133	processing: coil resistance
1134	processing: coil temperature
1135	processing: coil isolation resistance
1136	processing: linearity
1137	processing: electrode voltage E1
1138	processing: electrode voltage E2
1139	processing: electrode balance
1140	processing: DAC
1141	processing: signal noise ratio
1142	processing: status
1143	All min/max values are set to default and all mode are set to off
1144	Reset all extended diagnosis register?
1145	All extended diagnosis register are reset
1146	Really transfer electrode zero?
1147	Electrode zero has been transfered
1148	Really transfer reference resistance?
1149	Reference resistance has been transfered
1150	Totalizer forward
1151	write totalizer frw = %{0} ?
1152	Totalizer reverse
1153	write totalizer rev = %{0} ?
1154	Totalizer diff
1155	write totalizer diff = %{0} ?
1156	Reset all totalizer ?
1157	Reset error register and counter mains interrupt?
1158	Reset configuration changed flag ?
1159	Old PS-Code?
1160	uiEingabeAltPS
1161	New PS-Code?
1162	uiEingabeNeuPS
1163	Write new PS-Code?
1164	wrong PS-Code
1165	Choose from list
1166	Toggle Contact out;End
1167	Contact output is ON
1168	Contact output is OFF
1169	contact output is set to actual
1170	Test Contact input;End
1171	Contact input is ON
1172	Contact input is OFF
1173	contact input is set to actual
1174	Main Fram;Backup Fram;Flash Checksum;End
1175	Testing Main Fram
1176	Testing Backup Fram
1177	Testing Flash Checksum
1178	Error: Main Fram
1179	Error: Backup Fram
1180	Error: Flash Checksum
1181	Main Fram: OK
1182	Backup Fram: OK
1183	Flash Checksum: OK
1184	Testvalue Pulse output?
1185	Start test pulse output?
1186	pulse output is set to %{0} Hz
1187	pulse output is set to actual
1188	Testvalue QSimulation?
1189	Start test QSimulation?
1190	QSimulation is set to %{0}%, flow percent value is %{1}%
1191	QSimulation is turned off
1192	Start adjust empty pipe detector not possible! Please first turn ON Empty Pipe Detector
1193	Start adjust detector empty pipe not possible! EPD not in mode New Adjust
1194	Start adjust empty pipe detector with full pipe?
1195	Adjust full pipe
1196	Error Adjust full pipe
1197	Adjust full pipe ok. New threshold empty pipe detector %{0}
1198	Start adjust empty pipe detector not possible! EPD not in mode New Adjust
1199	Start adjust empty pipe detector with empty pipe?
1200	Adjust pipe empty
1201	Error Adjust pipe empty
1202	Adjust empty pipe ok. New threshold empty pipe detector %{0}
1203	Send new Pulse factor %{0}/%{1}?
1204	Converter changed input. New Pulse factor %{0}
1205	Converter changed Pulse width to %{0} ms
1206	Send new Pulse width %{0} ms?
1207	Converter changed input. New Pulse width %{0} ms
1208	Converter changed Pulse factor to %{0} .
1209	Start automatic adjust System Zero?
1210	Adjust System Zero
1211	Error Adjust System Zero
1212	Adjust System Zero ok. New System Zero %{0}
Reference ID	String