Device dictionary

Loading…

Reference ID	String
0	ABB
1	600T
2	EEPROM 1 error
3	EEPROM 2 error
4	Stat Pres ool
5	Sens Temp ool
6	Elec Temp ool
7	Sensor failed
8	ASIC Counter ool
9	Checksum error
10	Stat Pres oopl
11	Sens Temp oopl
12	Elec Temp oopl
13	Field Device Primary Variable Unit - Engineering unit that the Digital Value, Upper Range Value and Lower Range value will be displayed with.
14	inH2O @20DegC
15	inHg @0DegC
16	feet H2O @20DegC
17	mmH2O @20DegC
18	mmHg @0DegC
19	torr @0DegC
20	Off line Threaded
21	Chemical Tee
22	Button
23	Tri Clamp
24	Alimentary
25	Union Connection
26	Aseptic
27	Off line flange conn.
28	Sanitary Flush
29	Sanitary Extended
30	Flush Flanged
31	Extended Flanged
32	Urea Service
33	Lev.Flange Typ Flush
34	Lev.Flange Typ Ext.
35	Welded Flange
36	Level Sanitary
37	Level Food
38	No Flange Dir.Conn.
39	All welded Remote S.
40	Gasketed Remote S.
41	Analog 4-20mA
42	Digital 4-20mA
43	Integral digital
44	Int.+ Analog 4-20mA
45	Int.+ Digita 4-20mA
46	17-4-PH
47	Hastelloy C276
48	AISI 316L TFE Coated
49	Hast.C276 TFE Coated
50	Santotherm
51	Silicon oil food
52	Neobee
53	Dowtherm
54	Ethyl benzene
55	Ethyl alcohol
56	Propyl.glycol/Water
57	Dibutyl penthalate
58	Siltherm 800
59	Mercury
60	2.5 kpa
61	5 kpa
62	7.5 kpa
63	10 kpa
64	12.5 kpa
65	15 kpa
66	25 kpa
67	40 kpa
68	50 kpa
69	60 kpa
70	80 kpa
71	120 kpa
72	140 kpa
73	160 kpa
74	200 kpa
75	250 kpa
76	400 kpa
77	600 kpa
78	1200 kpa
79	1600 kpa
80	2400 kpa
81	3200 kpa
82	4200 kpa
83	4800 kpa
84	6000 kpa
85	7000 kpa
86	25 mbar
87	50 mbar
88	75 mbar
89	100 mbar
90	125 mbar
91	150 mbar
92	250 mbar
93	400 mbar
94	500 mbar
95	600 mbar
96	800 mbar
97	1200 mbar
98	1400 mbar
99	1600 mbar
100	2000 mbar
101	2500 mbar
102	4000 mbar
103	6000 mbar
104	12 bar
105	16 bar
106	24 bar
107	32 bar
108	42 bar
109	48 bar
110	60 bar
111	70 bar
112	80 bar
113	100 bar
114	120 bar
115	160 bar
116	250 bar
117	420 bar
118	450 bar
119	700 bar
120	1200 bar
121	1500 bar
122	10 inH2O
123	20 inH2O
124	30 inH2O
125	40 inH2O
126	50 inH2O
127	60 inH2O
128	100 inH2O
129	160 inH2O
130	200 inH2O
131	240 inH2O
132	320 inH2O
133	480 inH2O
134	560 inH2O
135	640 inH2O
136	800 inH2O
137	46 mmHg
138	37 mmHg
139	56 mmHg
140	75 mmHg
141	93 mmHg
142	112 mmHg
143	187 mmHg
144	300 mmHg
145	375 mmHg
146	450 mmHg
147	600 mmHg
148	900 mmHg
149	1050 mmHg
150	1200 mmHg
151	1500 mmHg
152	58 psia
153	87 psia
154	174 psia
155	232 psia
156	348 psia
157	464 psia
158	609 psia
159	696 psia
160	870 psia
161	1000 psia
162	58 psig
163	87 psig
164	174 psig
165	232 psig
166	348 psig
167	464 psig
168	609 psig
169	696 psig
170	870 psig
171	1000 psig
172	1450 psi
173	1740 psi
174	2320 psi
175	3625 psi
176	4641 psi
177	5801 psi
178	8702 psi
179	11603 psi
180	14503 psi
181	22000 psi
182	1 kpa
183	1.5 kpa
184	2 kpa
185	3 kpa
186	4 kpa
187	20 kpa
188	30 kpa
189	70 kpa
190	100 kpa
191	300 kpa
192	800 kpa
193	1000 kpa
194	8000 kpa
195	10000 kpa
196	16000 kpa
197	17500 kpa
198	25000 kpa
199	42000 kpa
200	45000 kpa
201	70000 kpa
202	120000 kpa
203	150000 kpa
204	10 mbar
205	15 mbar
206	20 mbar
207	30 mbar
208	40 mbar
209	200 mbar
210	300 mbar
211	700 mbar
212	1000 mbar
213	3 bar
214	4 bar
215	6 bar
216	8 bar
217	10 bar
218	4 inH2O
219	6 inH2O
220	8 inH2O
221	12 inH2O
222	16 inH2O
223	80 inH2O
224	120 inH2O
225	280 inH2O
226	400 inH2O
227	1000 inH2O
228	525 mmHg
229	750 mmHg
230	1900 mmHg
231	45 psia
232	115 psia
233	145 psia
234	725 psia
235	1160 psia
236	45 psig
237	115 psig
238	145 psig
239	725 psig
240	1160 psig
241	6090 psi
242	6525 psi
243	10150 psi
244	17400 psi
245	Factory trim
246	Sensor Factory trim method - The factory trimming is a reset to the values used in the factory for the trimming operation and can be usually done without the need of external equipment.
247	FMU860
248	DT
249	DVC
250	FCX
251	AS800
252	340T
253	340C
254	344
255	Siemens Micro K
256	SITRANS L
257	SIPAN PH
258	SITRANS P
259	75SMT
260	UNIDELTA
261	8320
262	SX5100
263	TSV175
264	DMU
265	3780
266	BM70
267	8u
268	low
269	high
270	Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit. Pressure- Pressure of the process measured with respect to a reference pressure.
271	Send warning
272	Send Warning- Yields a units code notice to the User.
273	Variables which use this as the units code will be in the previous units until this value is sent to the device.
274	Up-Down Scale mode
275	Up-Down Scale mode - Defines the setting of the current output when fatal errors are detected.
276	Transfer Function - Defines the transformation function that will be applied between the Field Device Variable and the respective assigned Analog Output. The transfer function does not affect the Digital Value.
277	5th Order polyn
278	Meter Installation - Defines whether there is a meter installed or not and, if integral, what information the meter will display.
279	Analog - 4-20mA
280	Digital - 4-20mA
281	Push Buttons
282	Push Buttons - Indicates whether the instrument is fitted with Zero and/or Span calibration buttons.
283	No Push Buttons
284	Zero Pushbutton only
285	Zero & Span Pushbut.
286	Flange Type - Hardware, adjacent to the sensor, that physically connects the process to the sensor.
287	1/2in NPT-F
288	DIN
289	Conventl. + insert
290	Flange Material - Indicates the material of the flange.
291	316L + PTFE insert
292	Oring Material - Indicates the construction material of a seal that exists between the module and the flange.
293	TFE Glass filled
294	Drain Vent Material - Indicates the material of the vents.
295	AISI 303 SS
296	AISI 316L SS NACE
297	Remote Seal Isolator Material - Defines the material of the remote seal wetted diaphragm.
298	Nickel
299	Zirconium
300	Silver
301	Module Isolator Material - Indicates the material of the sensor diaphragm.
302	Remote Seal Type - Defines the type of Remote seal.
303	Threaded
304	Threaded food
305	Remote Seal Fill Fluid - Defines the remote seal filling liquid.
306	Propylene glycol/Water
307	Number of Remote Seals - Physical quantity of the seals for the remote seal that is installed.
308	Sensor Fill Fluid - Fluid material in the module.
309	Module range - This is the range for the sensor.
310	12000 mbar
311	16000 mbar
312	24000 mbar
313	32000 mbar
314	42000 mbar
315	48000 mbar
316	60000 mbar
317	10 mpa
318	12 mpa
319	16 mpa
320	25 mpa
321	32 mpa
322	40 mpa
323	60 mpa
324	80 mpa
325	100 mpa
326	Calibration Type - Indicates if std. or specific on operating pressure or temperature or both.
327	Procedure Type
328	Procedure Type - It is the type of any special procedure required for the manufacture of the sensor, e.g. degreasing.
329	Oxygen Cleaning
330	Chlorine Cleaning
331	Hydrogen Preparation
332	Special Degreasing
333	Local keys mode
334	Local keys mode control - Disables the Zero and Span Push buttons.
335	LCD display mode
336	LCD display mode control - Selects the variables shown on the integral display.
337	Process variable
338	PV & % of range
339	PV & oput current
340	% of range
341	Root transfer mode
342	Root transfer function mode - selects behaviour of square root output at input values from 0 - 4 %.
343	Linear 20 % oput
344	Lin 1:1 20 % oput
345	Field Device Primary Variable Value - Represents the input pressure.
346	.3f
347	.2f
348	Sensor Limits Units
349	Sensor Limit Units and Minimum Span Units - Engineering units that the Upper Sensor Limit, Lower Sensor Limit and Minimum Span will be displayed with.
350	Module Type - Defines the Module type of the field instrument.
351	High Static Pressure
352	Special Transfer Function
353	Special Transfer Function.
354	Lower Sensor Trim Point - Applied process pressure at which the last lower sensor trim was performed. Pressure Sensor - Pressure hardware that measures pressure with respect to some reference pressure.
355	Upper Sensor Trim Point - Applied process pressure at which the last upper sensor trim was performed. Pressure Sensor - Pressure hardware that measures pressure with respect to some reference pressure.
356	Sensor trim units
357	Sensor trim units - It is the unit of the sensor trim points.
358	Maximum Working Pressure - Indicates the maximum pressure to which the transmitter can be submitted without causing danger and damage.
359	Maximum Working Pressure Units - The units of the Maximum working pressure.
360	Max sens temp
361	Maximum sensor Pressure - Indicates the maximum temperature to which the sensor or the electronic can be submitted without causing danger and damage.
362	Max sens temp units
363	Maximum sensor temperature units - The units of the Maximum sensor or electronic temperature units.
364	Min sens temp
365	Minimum sensor Temperature - Indicates the minimum temperature to which the sensor or the electronic can be submitted without causing danger and damage.
366	Min sens temp units
367	Minimum sensor temperature units - The units of the Minimum sensor or electronic temperature units.
368	A5
369	A5 coefficient - A5 coefficient for polynomial function.
370	1.6g
371	A4
372	A4 coefficient - A4 coefficient for polynomial function.
373	A3
374	A3 coefficient - A3 coefficient for polynomial function.
375	A2
376	A2 coefficient - A2 coefficient for polynomial function.
377	A1
378	A1 coefficient - A1 coefficient for polynomial function.
379	A0
380	A0 coefficient - A0 coefficient for polynomial function.
381	Analog Output
382	Analog Output value - Indicates the current output of the field instrument.
383	Percent of Range - Digital value that is proportional to the range defined by the Lower Range Value and the Upper Range Value. The units of this variable is always in percent.
384	%
385	Upper Sensor Limit - Value that defines the absolute upper endpoint (largest magnitude) for the digital value. Pressure - Pressure of the process measured with respect to some reference pressure.
386	.1f
387	Lower Sensor Limit - Value that defines the absolute lower endpoint (smallest magnitude) for the digital value. Pressure - Pressure of the process measured with respect to some reference pressure.
388	Upper Range - Defines the operational endpoint from which the Analog Value and the Percent of Range are derived. In addition, the range values define the points at which the 'analog output saturated' warning is set.
389	Lower Range - Defines the operational endpoint from which the Analog Value and the Percent of Range are derived. In addition, the range values define the points at which the 'analog output saturated' warning is set.
390	Damping Value - Damping time constant applied to both the Digital Value and Analog Value of the respective output. The Units of this variable are always in seconds.
391	5.2f
392	2.2f
393	Static Pres
394	Tertiary variable Static Pressure Value.
395	Sta pres unit
396	Tertiary variable Static Pressure Units.
397	Stat Pres trim pt
398	Static Pressure trim point - The pressure at which static trim is to take place.
399	Stat Pres trim unit
400	Static Pressure Trim Unit - Units of the static pressure trim point.
401	MPa
402	Snsr temp
403	Secondary variable Sensor Temperature Value - The displayed temperature is not the process temperature, it is the temperature in the sensor's core.
404	Snsr temp unit
405	Secondary variable Sensor Temperature Unit.
406	Elec temp
407	Fourth Variable - Temperature of the electronics.
408	Fourth Variable Electronic Temperature Unit.
409	Product code
410	Product Code - Specifies the transmitter's code number.
411	Sepratr&/Service
412	Separator &/or Services - Indicates the code of remote seal or code for special services or calibration.
413	Manf or orifice
414	Manifold or Orifice - Indicates the code of manifold or integral orifice.
415	Min span
416	Minimum Span value - Indicates the minimum allowable value for the span. The span is the algebraic difference between the Upper and Lower Range Value.
417	Sensor Serial Number - Indicates the sensor module serial number.
418	7d
419	Back to normal
420	Note: Loop may be returned to automatic control when SEND is done
421	Back to normal with msg
422	If transfer function changed chech square root mode & poly coeffs.
423	Factory trim method - The factory trimming is a reset to the values used in the factory for the trimming operation and can be usually done without the need of external equipment.
424	Trim will be set as at factory
425	Applied values read: PV: %{1} Units: %{0}
426	Applied zero reads: PV: %{1} Units: %{0}
427	Full trim
428	Full trim method - The full trimming allows the performance of high or low trim.
429	Last Input val used: Units: %{0} Hival: %{2} Loval: %{1}
430	Select choice:
431	High Trim;Low Trim;Display limits;Exit
432	Apply a Hival Pres. Higher than Loval
433	Pressure stabilizing. PLEASE WAIT...
434	Units: %{0} Pres. applied: %{1}
435	Enter applied Hival:
436	Aborting procedure due to last error
437	Apply a Loval Pres. Lower than Hival
438	Enter applied Loval:
439	SENSOR LIMITS: Units:%{0} USL: %{2} LSL: %{1}
440	Static trim
441	Static trim method - The static trimming allows a single point trim of Static Pressure
442	Static value read stat value: %{0} units: %{1}
443	Modify;Ready
444	Enter static value:
445	Rerange 4-20mA
446	Perform a device rerange to 4 - 20ma by applying source pressure input.
447	Now Apply input pressure (URV is %{0}) (LRV is %{1})
448	Current process value: %{0} %{1}
449	Read new value;Set as 4mA value;Set as 20mA value;Exit
450	Put coef0 into range 0-100
451	Put coef2 into range 0-100
452	Put coef3 into range 0-100
453	Put coef4 into range 0-100
454	Put coef5 into range 0-100
455	Put coef0 into range 0-1
456	Put coef2 into range 0-1
457	Put coef3 into range 0-1
458	Put coef4 into range 0-1
459	Put coef5 into range 0-1
460	Danger for max working pressure
461	DANGER: Change of this value affects plant and personnel safety. MUST be done by qualified personnel only.
462	Loop in manual
463	Before polling
464	WARN: TX with polling address different from 0 cannot be part of a control loop.
465	Commands the DPK pressure electronics to perform a selftest.
466	Executing selftest. PLEASE WAIT...
467	Self test terminated
468	Configure
469	Zero/Span cal
470	Status
471	Pres sensor trim
472	Sensor trim points
473	Sensor
474	Pres sensor
475	Pres sensor info
476	Temp sensor
477	Stat sensor
478	Pres input scaling
479	Display Limits
480	Product codes
481	Material Info
482	Revision #'s
483	Misc Info
484	write_variables
485	Offline
486	Polyn. coeffs
487	Up Down Scale Mode
488	Field Device Dynamic variables array
489	This is the array for the dynamic variables
490
491	Excess Correction Attempted
Reference ID	String