Loading…
Name ID Label Description Type Access Class
sensor_type 4016 ｾﾝｻｰ ﾀｲﾌﾟ Sensor type - Indicates the type of the sensor element: millivolt, thermocouple type, resistance thermometer type, ohms. R/W Enum 2048
measurement_type 4010 測定対象 Measurement type - Indicates the type of measurement: single/differential or average, internal/external or const CJC, external CJC sensor Pt100 or Ni100, 2/3 or 4 wire. R/W Enum 2048
meter_option 4017 ﾒｰﾀｰ ﾀｲﾌﾟ Meter option - Defines whether there is a meter installed or not and possibly what information the meter will display. R/W Enum 256
system_config 4018 system configuration For future use R Enum 2048
const_cjc_value 4019 Const. CJC value Constant CJ temperature value, the actual temperature at the junction of the thermocouple wires and the terminals. Units of PV R/W Float 2048
rtd_factor 401A RTD factor Multiplication factor for 100 Ohm RTD, reciprocal value, e.g. X=2 for Pt50, X=0.1 for Pt1000 R/W Float 2048
abs_max_value 401B Abs. max. value Absolute maximum value on individual sensors for differential measurements in units of PV R/W Float 2048
cable_resistance_config 401C Cable resistance config Cable resistance configuration - Configures the cable resistance value R/W Enum 4096
cable_resistance_value 401D Cable resistance value Cable resistance value in Ohms. If RTD/Ohm 3 or 4 wire is selected, sensor 1 is the expected max value for the total cable resistance in 2 wires, otherwise it is the actual total cable resistance. R/W Float 4096
current_output_100 401E AO 100% Output current value at PV = 100%, units of mA R/W Float 2048
Name ID Label Description Type Access Class