Loading…
Name ID Label Description Type Access Class
squawk_control 0988 Squawk Control W Enum 2048
xmtr_chk_abort_flag 415E R/W Unsigned 4096
static_pressure_value 4002 SP Static Pressure- Pressure of the process measured with respect to the reference pressure equal to 0. R Float 10
static_pres_percent 4003 SP % Static pressure percent of range- Static Pressure Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. R Float 34
snsr_temp_value 4004 Snsr temp Sensor temperature- Temperature measured at sensor capsule. R Float 10
easy_engr_unit 40B4 Engineer Unit Select Code for Easy Setting R/W Enum 256
engr_disp_value 4005 Engr Disp Engineering display- Process variable displayed in user scale and unit. R Float 258
engr_exp 4006 Engr exp Engineering display exponents- Exponents for user scale display. R/W Enum 256
engr_disp_unit 4007 Engr Unit Engineering unit- Engineering unit for user scale display. R/W ASCII 256
p_lower_trim_dev 4039 P LTD Lower pressure trim deviation- Deviation from the original value. R Float 8
p_upper_trim_dev 403A P UTD Upper pressure trim deviation- Deviation from the original value. R Float 8
sp_lower_trim_point 403D SP LTP Lower static pressure trim point- Applied static pressure at which the last lower static pressure trim was performed. R Float 8
sp_upper_trim_point 403E SP UTP Upper static pressure trim point- Applied static pressure at which the last upper static pressure trim was performed. R Float 8
sp_lower_trim_dev 4040 SP LTD Lower static pressure trim deviation- Deviation from the original value. R Float 8
sp_upper_trim_dev 4041 SP UTD Upper static pressure trim deviation- Deviation from the original value. R Float 8
trim_who 4043 Trim Who Trim information- Text that is associated with the trim information. This text can be used by the user in any way. A recommended use is to record who to trim the device. R/W PackedAscii 2048
trim_date 4044 Trim Date Trim information- Text that is associated with the trim information. This text can be used by the user in any way. A recommended use is to record when the latest trim is done for the device. R/W HartDate 2048
trim_loc 4045 Trim Loc Trim information- Text that is associated with the trim information. This text can be used by the user in any way. A recommended use is to record where the latest trim is done for the device. R/W PackedAscii 2048
trim_desc 4046 Trim Desc Trim information- Text that is associated with the trim information. This text can be used by the user in any way, and there is no recommended use. R/W PackedAscii 2048
low_cut_point 4011 Low cut Low cut- Sets the range in vicinity of 0% within which the low cut function is activated according to the selected low cut mode. R/W Float 2048
low_cut_mode 4012 Low cut mode Low cut mode- Selects the type of the low cut function to be used; LINEAR or ZERO. R/W Enum 2048
hl_swap 4013 H/L Swap High/Low swap- Reverses the high pressure side and low pressure side of the transmitter. For example, use this function when assigning the high pressure impulse line connection to the L side of the transmitter. R/W Enum 2048
sp_lrv 4050 SP LRV Static Pressure Lower Range Value- Defines the operational endpoint from which the 0% point of the Percent Range are derived. R/W Float 32
sp_urv 4051 SP URV Static Pressure Upper Range Value- Defines the operational endpoint from which the 100% point of the Percent Range are derived. R/W Float 32
static_pressure_units 404A SP Unit Static Pressure Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit for the Static Pressure. R/W Enum 8
Name ID Label Description Type Access Class