Loading…
名称 ID 标签 描述 类型 访问 分类
flow_units 1F7B 主变量单位 现场设备变量单位——使用数值表示、最小范围、范围上限、范围下限、传感器上限和传感器下限显示的工程单位。 读/写 枚举 32
flow_value 1F7C 主变量 现场设备变量值——在没有用户干扰的条件下，根据时间改变大小的数值。 读 浮点 34
flow_analog_value 1F7D PV AO 模拟量输出值——在正常工作模式下跟踪数值表示的数值。 读/写 浮点 34
flow_percent_range 1F7E 主变量 % 范围 % 范围——跟踪有关下限值和上限值所定义范围的数值表示的变量，该变量的单位始终为百分数。 读 浮点 34
dummy_float_value1 4003 Dummy float value 读 浮点 32
dummy_float_value2 4004 Dummy float value 读 浮点 32
dummy_float_value3 4005 Dummy float value 读 浮点 32
dummy_float_value4 4009 Dummy float value 读/写 浮点 32
dummy_3integer_value 4006 Dummy Integer3 Value 读 无符号 2048
flow_alarm_select 1F83 4-20mA Burn Out 模拟量输出报警类型——定义当现场设备检测到模拟量输出可能未跟踪关联现场设备变量时模拟量输出响应的方式。注意——数值表示可能不确定。 读 枚举 64
dummy_transfer_func 4007 Dummy transfer function 读 枚举 2048
flow_span_disp 4008 PV Span Sets flow rate span (with units from "Base Flow Unit" and "Base Time Unit"). 读/写 浮点 32
flow_damping_value 1F87 PV Damping 阻尼值——同时应用至各自模拟量输出的数值表示和模拟值的阻尼时间常数。该变量的单位始终为秒钟。 读/写 浮点 32
flow_total_units 400B Total Unit 读 枚举 32
flow_total_value 400C 总值 Displays the totalized value for flow rate in the forward direction. 读 浮点 34
rev_total_units 400E Reverse Totl Units 读 枚举 32
rev_total_value 400F Reverse Totl Displays the totalized value for flow rate in the reverse direction. 读 浮点 34
dif_total_units 4010 Dif Totl Units 读 枚举 32
dif_total_value 4011 Dif Totl Displays the totalized value for flow rate between forward totalization and reverse totalization. 读 浮点 34
select_flow_tube 4012 Select Flow Tube Selects the flowtube's model name. 读/写 枚举 2048
nominal_size_unit 4013 Nominal Size Unit Selects the nominal size units for the flowtube. 读/写 枚举 2048
nominal_size 4014 Nominal Size Sets flowtube nominal size in selected unit at "Nominal Size Unit". 读/写 浮点 2048
measure_mode 4015 Measure Mode Selects measurement mode for dual frequency excitation. 读/写 枚举 2048
low_mf 4016 Low MF Sets low-frequency meter factor for standard dual frequency excitation. 读/写 浮点 2048
high_mf 4017 High MF Sets high-frequency meter factor for standard dual frequency excitation. 读/写 浮点 2048
low_mf_edf 4018 Low MF(EDF) Sets low-frequency meter factor for enhanced dual frequency excitation. 读/写 浮点 2048
high_mf_edf 4019 High MF(EDF) Sets high-frequency meter factor for enhanced dual frequency excitation. 读/写 浮点 2048
span_unit 401A Span Unit 读 枚举 2048
pv_span 401B PV Span Sets flow rate span (with units from "Base Flow Unit" and "Base Time Unit"). 读/写 浮点 32
base_flow_unit 401C Base Flow Unit Selects flow units for the flow rate span. 读/写 枚举 2048
base_time_unit 401D Base Time Unit Selects time units for the flow rate span. 读/写 枚举 2048
flow_decimal_point 401E Flow Decimal Pnt Selects decimal point position for the display unit's instantaneous flow rate. 读/写 枚举 2048
density_unit 401F Density Unit Sets units for density when mass flow rate is selected. 读/写 枚举 2048
mass_flow_density 4020 Mass Flow Density Sets density when mass flow rate is selected (with units from "Density Unit"). 读/写 浮点 2048
user_span_select 4021 User Span Select Selects whether or not special units are used as flow rate units. 读/写 枚举 2048
user_flow_unit 4022 Flow User Unit Sets the special flow rate units. 读/写 ASCII 2048
user_flow_span 4023 Flow User Span Sets span when using special flow rate units. 读/写 浮点 2048
analog_low_cut 4024 4-20mA Low Cut Sets the range in vicinity of 0 % within which the current output will be 4 mA. 读/写 浮点 2048
analog_low_lmt 4025 4-20mA Low Lmt Sets the low limit for current output. 读/写 浮点 2048
analog_high_lmt 4026 4-20mA High Lmt Sets the high limit for current output. 读/写 浮点 2048
velocity_check 4027 Velocity Check Display of the span setting using flow velocity (m/s). 读 浮点 2050
magflow_zero 4028 Magflow Zero Displays the result of the automatic zero adjustment, or sets the zero point. 读/写 浮点 2048
autozero_time 4029 Autozero Time 读/写 整型 2048
auto_zero_exe 402A Auto Zero Exe Selects whether or not automatic zero adjustment is carried out. 读 枚举 2048
disp_select1 402B Display Select1 Selects content of the first line for Display Mode. 读/写 枚举 2048
disp_select2 402C Display Select2 Selects content of the second line for Display Mode. 读/写 枚举 2048
disp_select3 402D Display Select3 Selects content of the third line for Display Mode. 读/写 枚举 2048
disp_cycle 402E Display Cycle Selects the display cycle. 读/写 枚举 2048
lcd_contrast 402F LCD Contrast 读/写 整型 2048
language 4030 Language Selects the language used for the display unit. 读/写 枚举 2048
名称 ID 标签 描述 类型 访问 分类