Loading…
名称 ID 标签 描述 类型 访问 分类
factory_password_verified 4038 Password Verified Password Verified. 读 枚举 4096
entered_pswd 4039 Entered Password Entered Password. 读/写 Password 4096
CalFlags 403A 读/写 无符号 2050
reserved_2 403B 读/写 枚举 2050
pst_discrete_io 403C PST I/O: Enabling allows PST to use external input to start and external output for successful completion indication. 读/写 枚举 2050
device_ctrl 403D Device Control: Enabling allows the device to automatically control the valve via the solenoid thereby allowing device to open/close valve to perform Auto Calibration and Baseline/Maintenance Signatures on command. By disabling, the user must manually control the valve to perform calibration, in which case the speed of valve movement is not measured as required to capture signatures unless Signatures are enabled and Dynamic Baseline is used. 读/写 枚举 2050
beacon_orientation 403E Beacon Orientation: Beacon Orientation status shows the beacon magnet orientation as normal or 180 degrees off. This parameter cannot be changed by the user because the device will automatically detect this and set accordingly. During a calibration, the operation may fail on first attempt but performing a second full calibration will automatically compensate for this if the beacon is backwards and update this status. 读/写 枚举 2050
solenoid_operation 403F Solenoid Operation: DEPIC2 can work with 1 solenoid (Simplex) or 2 solenoids (Duplex, redundancy) with spring-return actuators. This allows PST to be performed with one solenoid followed by a SOVT with the other solenoid. 读/写 枚举 2050
actuator_type 4040 Actuator Type: DEPIC2 can work with spring-return or double-acting actuators. The first firmware release 1.00 will only support Spring-return applications. 读/写 枚举 2050
pressure2_supply 4041 Pressure2 Usage: DEPIC2 can use pressure 2 sensor for Supply Pressure or as pressure in second chamber of actuator (such as double-acting). 读/写 枚举 2050
名称 ID 标签 描述 类型 访问 分类