Loading…
名称 ID 标签 描述 类型 访问 分类
pst_sttl_alarm_enable 406A PST Slw Trvl Tm: When enabled, the DEPIC2 will signal this failure alarm when the Maintenance PST fails due to exceeding a Slow Travel Time Limit to reach the Travel-Limit of the Baseline PST as determined by the PST Travel Time Hysteresis % (configuration). 读/写 枚举 2050
test_invpstn_alarm_enbl 406B PST/SOVT Inv Pstn: When enabled, the DEPIC2 will signal this failure alarm when the PST fails due to the valve being in an invalid position to perform a PST/SOVT. 读/写 枚举 2050
bit7_alarm_enable 406C Reserved Bit7: . 读/写 枚举 2050
bit6_alarm_enable 406D Reserved Bit6: . 读/写 枚举 2050
bit5_alarm_enable 406E Reserved Bit5: . 读/写 枚举 2050
bit4_alarm_enable 406F Reserved Bit4: . 读/写 枚举 2050
bit3_alarm_enable 4070 Reserved Bit3: . 读/写 枚举 2050
pst_exceed_trvl_lim_enable 4071 XTrvl Lim Alarm: When enabled, the DEPIC2 will signal this failure alarm when it has detected the PST has exceeded the designated Travel limit. Possible cause may be the solenoid is becoming sluggish in response to voltage. 读/写 枚举 2050
test_invld_psi_alarm_enable 4072 Invld Press Alarm: When enabled, the DEPIC2 will signal this failure alarm when it has detected the supply pressure is too low to safely perform a PST/SOVT. 读/写 枚举 2050
psi_sensor_fail_alarm_enbl 4073 PSI Snsr Fail Alarm: When enabled, the DEPIC2 will signal this failure alarm when it has detected a pressure sensor failure during SOVT. 读/写 枚举 2050
名称 ID 标签 描述 类型 访问 分类