Loading…
名称 ID 标签 描述 类型 访问 分类
cycle_alarm_enbl 4060 Cycle Alarm: When enabled, the DEPIC2 will signal this alarm when the cycle limit is reached. 读/写 枚举 2050
service_alarm_enbl 4061 Service Alarm: Enble/disable Service/Maintenance Alarm. This alarm can only be set if the Service date/time is set. 读/写 枚举 2050
alert_alarm_enbl 4062 Alert Sum Alrm: When enabled, the DEPIC2 will set this alarm signal when a new alert transition (alert transition to Active or Inactive) has been logged in alert file. 读/写 枚举 2050
error_alarm_enbl 4063 Error Alarm: When enabled, the DEPIC2 will set this failure alarm signal when a severe or major error has been logged in error file. 读/写 枚举 2050
pst_xttl_alarm_enable 4064 PST Ex Tot Time: When enabled, the DEPIC2 will signal this failure alarm when the PST Exceeded Total Time Limit. This is only used for devices with the signature option disabled. 读/写 枚举 2050
pst_not_reach_trl_alarm_enable 4065 PST Not Reach TRL: When enabled, the DEPIC2 will signal this failure alarm when the PST fails to reach the configured Travel-Limit. Possible cause may be the valve started moving but then gets stuck before reaching the Travel-Limit. 读/写 枚举 2050
pst_lbpl_alarm_enable 4066 PST LoBrk Press: When enabled, the DEPIC2 will signal this failure alarm when the Maintenance PST fails due to low break pressure too far out of range (PST break pressure hysteresis) from Baseline PST. 读/写 枚举 2050
pst_hbpl_alarm_enable 4067 PST HiBrk Press: When enabled, the DEPIC2 will signal this failure alarm when the Maintenance PST fails due to high break pressure too far out of range (PST break pressure hysteresis) from Baseline PST. 读/写 枚举 2050
pst_solenoid_fail_alarm_enable 4068 Solenoid Fail: When enabled, the DEPIC2 will signal this failure alarm when a solenoid failure occurs during the last PST/SOVT or the last Duplex PST. If Duplex PST, look at PST Type data to determine which solenoid failed. 读/写 枚举 2050
pst_fttl_alarm_enable 4069 PST Fst Trvl Tm: When enabled, the DEPIC2 will signal this failure alarm when the Maintenance PST fails due to exceeding a Fast Travel Time Limit to reach the Travel-Limit of the Baseline PST as determined by the PST Travel Time Hysteresis % (configuration). 读/写 枚举 2050
名称 ID 标签 描述 类型 访问 分类