Loading…
Name ID Label Description Type Access Class
hall_sensor_gain 4022 Hall Sensor Gain: Information Only: Shows the calibrated Hall Sensor gain. In general, will take on values of 10, 20, 30, or 40. R Unsigned 32
open_speed_index 4023 Open Speed Index: Information Only: Shows the calibrated relative opening speed index of the valve/actuator. This index correlates to a specific speed range in seconds. R Unsigned 32
close_speed_index 4024 Close Speed Index: Information Only: Shows the calibrated relative closing speed index of the valve/actuator. This index correlates to a specific speed range in seconds. R Unsigned 32
mA_out_reversed 4025 mA Out Reversed: Indicates if the device considers the output current reversed, ie. Reversed means 20 mA for closed position. R Enum 32
temperatureUnits 4026 Temperature Units Engineering Unit to be displayed with Device Temperature R Enum 34
temperatureValue 4027 Dev Temperature Shows the temperature of the device as measured at the CPU and will be displayed in C or F depending upon UI configuration (Configuration->Basic Configuration->UI Configuration). R Float 34
CalTemperatureUnits 4029 Temperature Units Engineering Unit to be displayed with Device Calibration Temperature. R Enum 34
CalTemperatureValue 402A Cal Temperature: Shows the temperature of the device as measured at the CPU at the last full calibration and will be displayed in C or F depending upon UI configuration (Configuration->Basic Configuration->UI Configuration). R Float 34
CalPressureValue 402C Supply Pressure: Shows the supply pressure at the device during the last full calibration. R Float 34
gap_err_counter 402D HART Gap Err Cnt: Information Only: Shows the number of HART gap faults encountered since last power cycle. R Unsigned 34
Name ID Label Description Type Access Class