Loading…
Name ID Label Description Type Access Class
output_analog_value 400A Output I Refers to the actual valve position in terms of current in mA. R Float 66
damping_val 400B PV Damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 8
input_upper_value 400C FS In Refers to the input current to move the valve to full open / close position in normal / reverse operation. R Float 32
input_lower_value 400D Zero In Refers to the input current to move the valve to full open / close position in normal / reverse operation. R Float 32
output_upper_value 400E FS Out Refers to the output current when the valve is at full open / close position in normal / reverse operation. R Float 32
output_lower_value 400F Zero Out Refers to the output current when the valve is at full open / close position in normal / reverse operation. R Float 32
sensor_serial_number 4010 Sensor Serial Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 32
min_sensor_span 4011 Min_Sensor_Span Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. R Float 32
flow_type 4016 Flow Type The DEPIC supports Linear, Quick Opening, and Equal Percentage flow types. R/W Enum 32
cal_busy 4017 CAL BUSY Busy reading limits. R/W Enum 1025
Name ID Label Description Type Access Class