Loading…
Name ID Label Description Type Access Class
DO2_status_code 402E DO2 Digital output2 functions can be selected. R/W Enum 2048
DI_status_code 402F DI Digital input functions can be selected. R/W Enum 2048
DI_det_level 40B2 DI det level You can select the detective level of the digital input, as shown below, to control the totalizer and pulse output. (Only when the digital input function is set for totalizer control input) R/W Enum 2048
alarm_action 4093 DO status Digital output active status (Only when alarm output is set ) R/W Enum 2048
Flow_dir 40F8 Flow dir NORMAL:When the fluid flows in the direction of the arrow indicating the flow direction that is attached to the detector, the indicator value and electric current output value increase. SWITCH:When the fluid flows in the reverse direction of the arrow indicating the flow direction that is attached to the detector, the indicator value and electric current output value increases. R/W Enum 2048
Dspl_low_cut 40F9 Dspl low cut When low cutoff is set, this function determines whether to use the low cutoff processing for displayed values. LINEAR:Low cutoff processing is not used for displayed values. LOW CUT:Displayed values are processed with low cutoff. R/W Enum 2048
LF_low_limit 40FA Low limit The low limit of the current output for converter can be set. R/W Enum 2048
LF_Self_chk 40FB Self check You can select on/off setting for the self-diagnosis function. If the self-diagnosis function is set to OFF, no error message is displayed even if any of the errors. R/W Enum 2048
input_conv_alarm 40FC Conv alarm If CONV ALARM is set for Digital output function, a digital signal will be output in case the converter's self-diagnosis function detects an error. In this case, you can set whether the empty pipe alarm is to be included in the converter alarm items. CONV ONLY:Empty pipe alarm is not included in the converter alarm output items. WITH EMP:Empty pipe alarm is included in the converter alarm output items. R/W Enum 2048
lcd_adj 40FD LCD adj The display of the LCD, by its natural characteristics, gradually becomes lighter over time. If the display becomes too dark, you need to adjust the density by using this parameter. R/W Enum 2048
Name ID Label Description Type Access Class