Loading…
Name ID Label Description Type Access Class
analog_value 400A AO Analog Output Value- Value that tracks the Digital Value representation, under normal operating modes R/W Float 66
analog_alarm_code 400B AO Alrm typ Analog Output Alarm Type- Defines how the Analog Output will respond when the Field Device detects that the Analog Output may not be tracking the associated Field Device Variable. NOTE- The Digital Value representation may not be determinate. R Enum 64
input_percent_range 400C PV% range Percent of Range- Variable that tracks the Digital Value representation with respect to the range defined by the Lower Range Value and Upper Range Value, for normal operating modes. The units of this variable are always in percent. R Float 34
input_transfer_function 400D Xfer fnctn Transfer Function- Defines the transformation function that will be applied from the Field Device Variable to the Analog Output, and Percent Range. The Transfer Function does not affect the Digital Value representation. R/W Enum 32
input_low_cut_value 400E Low cut value Low cut value- refers to the function for fixing the current output to 0% when the flow rate drops below the low cut value preset near 0%. R/W Float 32
input_ex_curr 408D Ex.Curr. Excitation current code R/W Float 32
input_manual_zero 40A9 Manual zero Manual Zero- Manual Zero value is setting for zero offset value that can be applied to make outputs comparable to process values measured by other instruments. R/W Float 32
input_range_units 400F Unit Range Unit- Engineering unit to be displayed with the Upper Range Value and Lower Range Value R/W Enum 32
input_upper_value 4010 R1 R1- Range 1 span value. R/W Float 32
input_upper_value2 4011 R2 R2- Range 2 span value. R/W Float 32
Name ID Label Description Type Access Class