Loading…
Loading…
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |
---|---|---|---|---|---|---|
pipe_description | 4001 | 管道描述 | Pipe desc -User message to describe the pipe. | 读/写 | 压缩文本 | 0 |
percent_solids_carrier | 4002 | Density of carrier | Density of Carrier -The density of the carrier liquid. | 读/写 | 浮点 | 0 |
percent_solids_of_material | 4003 | Density of material | Density of Matl -The density of the solid material in the slurry. | 读/写 | 浮点 | 0 |
adapt_damp_status | 4005 | Adapt Damp Status | Adapt Damp Status -Control to activate adaptive damping. | 读/写 | 枚举 | 0 |
adapt_damp_value | 4006 | Adapt Damp Value | Adapt Damp Value -The damping time used when the adaptive damping is active. | 读/写 | 浮点 | 0 |
damping_threshold | 4007 | Damping Threshold | Damping Threshold -Percent deviation from last value where the adaptive damping becomes active. | 读/写 | 浮点 | 0 |
process_description | 4009 | 过程描述 | Process desc -User entered description of process. | 读/写 | 压缩文本 | 0 |
temp_comp_status | 4011 | Temp Comp Status | Temp Comp Status -This option turns the temperature compensation on and off. | 读/写 | 枚举 | 0 |
temp_comp_ref_temp | 4012 | Ref Temp | 读/写 | 浮点 | 0 | |
temp_comp_expan_coef | 4013 | Expansion Coef | 读 | 浮点 | 0 | |
rho1 | 4015 | RHO1 | Rho1 -The density of the process at the first temperature. | 读/写 | 浮点 | 0 |
rho2 | 4016 | RHO2 | Rho2 -The density of the process at the second temmperature. | 读/写 | 浮点 | 0 |
temp1 | 4017 | Temp1 | Temp1 -The temperature at which the first density value is recorded. | 读/写 | 浮点 | 0 |
temp2 | 4018 | Temp2 | Temp2 -The temperature at which the second density value is recorded. | 读/写 | 浮点 | 0 |
ext_input_units | 4020 | 单位 | 写 | 枚举 | 0 | |
ext_input_zero | 4021 | Zero Value | 写 | 浮点 | 0 | |
input_span_trim | 4023 | Span value | 写 | 浮点 | 0 | |
last_ref_date | 4027 | Last ref | Last ref -The date on which the last reference was taken on the device. | 读 | HART日期 | 0 |
last_ref_time_hour | 4028 | Ref hr | 读 | 整型 | 0 | |
last_ref_time_minute | 4029 | Ref min | 读 | 整型 | 0 | |
last_ref | 402A | Counts | 读 | 浮点 | 0 | |
ref_duration | 402C | 参考持续时间 | 读 | 浮点 | 0 | |
ref_sample_control_code | 402E | 参考样本控制代码 | 读/写 | 枚举 | 0 | |
cal_point_number | 4030 | Cal Point Number | 读/写 | 索引 | 4096 | |
cal_units | 4032 | 标定点单位 | 读/写 | 整型 | 0 | |
cal_density_1 | 4033 | #1DENSITY | #1DENSITY--The density value for the first calibration point. This point is always used for the calibration curve. | 读/写 | 浮点 | 0 |
cal_signal_1 | 4034 | #1SIGNAL | #1SIGNAL--The signal value for the first calibration point. This point is always used for the calibration curve. | 读/写 | 浮点 | 0 |
cal_density_2 | 4039 | #2DENSITY | #2DENSITY--The density value for the second calibration point. This point is always used for the calibration curve. | 读/写 | 浮点 | 0 |
cal_signal_2 | 403A | #2SIGNAL | #2SIGNAL--The signal value for the second calibration point. This point is always used for the calibration curve. | 读/写 | 浮点 | 0 |
cal_density_3 | 403C | #3DENSITY | #3DENSITY--The density value for the third calibration point. If this calibration point is not used, the density should be set to zero. | 读/写 | 浮点 | 0 |
cal_signal_3 | 403D | #3SIGNAL | #3SIGNAL--The signal value for the third calibration point. This point is not used if the density for point three is zero. | 读/写 | 浮点 | 0 |
cal_density_4 | 403F | #4DENSITY | #4DENSITY--The density value for the fourth calibration point. If this calibration point is not used, the density should be set to zero. | 读/写 | 浮点 | 0 |
cal_signal_4 | 4040 | #4SIGNAL | #4SIGNAL--The signal value for the fourth calibration point. This point is not used if the density for point four is zero. | 读/写 | 浮点 | 0 |
cal_density_5 | 4042 | #5DENSITY | #5DENSITY--The density value for the fifth calibration point. If this calibration point is not used, the density should be set to zero. | 读/写 | 浮点 | 0 |
cal_signal_5 | 4043 | #5SIGNAL | #5SIGNAL--The signal value for the fifth calibration point. This point is not used if the density for point five is zero. | 读/写 | 浮点 | 0 |
cal_density_6 | 4045 | #6DENSITY | #6DENSITY--The density value for the sixth calibration point. If this calibration point is not used, the density should be set to zero. | 读/写 | 浮点 | 0 |
cal_signal_6 | 4046 | #6SIGNAL | #6SIGNAL--The signal value for the sixth calibration point. This point is not used if the density for point six is zero. | 读/写 | 浮点 | 0 |
sample | 404B | 样本 | 读 | 浮点 | 0 | |
sample_duration | 404C | Samp Duration | Samp Duration--The time of the sample measurement. The maximum value is 600 seconds. | 读/写 | 浮点 | 0 |
dens_offset_units | 404F | 单位 | 读/写 | 枚举 | 0 | |
dens_offset | 4050 | Dens Offset | Density Offset--A value supplied by the user and added to the density value measured. | 读/写 | 浮点 | 0 |
temp_input_type | 4052 | Temp Sensor Type | Temp Comp Input Sensor Type -The type of sensor used to measure temperature. | 读/写 | 枚举 | 0 |
temp_input_units | 4053 | Units | Temp Comp Units -The units associated with the device used for temperature compensation. | 读/写 | 枚举 | 0 |
ext_input_4ma_point | 4054 | Zero Point Value | Zero Point Value -The zero range point for the temperature transmitter. | 读/写 | 浮点 | 0 |
ext_input_20ma_point | 4055 | Span Value | Span Value -The high range point for the temperature transmitter. | 读/写 | 浮点 | 0 |
last_cal_locat | 4026 | Last setup locatn | 读/写 | 枚举 | 0 | |
ref_material | 4056 | 参考材料 | Ref Material -The material selected for the next reference. | 读/写 | 枚举 | 0 |
gamma_source | 4057 | 源类型 | Source Type -The type of source contained in the source housing. | 读/写 | 枚举 | 0 |
xmtr_date | 405D | Date | 读/写 | HART日期 | 0 | |
xmtr_time_hrs | 4061 | Time-Hrs | 读/写 | 无符号 | 0 | |
名称 | ID | 标签 | 描述 | 类型 | 访问 | 分类 |