Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
lstLinearizationDistance | 4077 | Limit Status | Limit Status 'LS' | R/W | Enum | 10 |
fstLinearizationDistance | 4078 | Family Status | Family Status 'FS' | R | BitEnum | 10 |
utpLinearizationDistance | 4079 | Update Time | Update Time Period 'UTP'. Indicates the maximum period between updates of the process variable. | R | Time | 8 |
simulateLinearizationDistance | 407A | Set Simulation | Desired setting of the process variable simulation. If enabled, the process variable will be simulated and won't show the actual process value. | W | Enum | 2048 |
propertiesLinearizationDistance | 407B | Properties | Properties, indicate e.g. the simulation state. | R | BitEnum | 10 |
dfoUllage | 407E | Format Ullage | Display format for Ullage. Local for HART applications, no correlation with device's local display. | R/W | Enum | 4096 |
dvlUllage | 407D | Ullage | By applying a suitable conversion table, the distance to the medium can be converted into its volume. It is only available if the conversion table is configured for volume conversion. | R/W | Float | 10 |
uslUllage | 407F | Upper Sensor Limit | Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. | R | Float | 8 |
lslUllage | 4080 | Lower Sensor Limit | Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. | R | Float | 8 |
mspUllage | 4081 | Minimum Span | Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. | R | Float | 8 |
dfaUllage | 4082 | Family | Device Variable Family | R | Enum | 8 |
dqaUllage | 4083 | Data Quality | Process Data Quality 'PDQ' | R/W | Enum | 10 |
lstUllage | 4084 | Limit Status | Limit Status 'LS' | R/W | Enum | 10 |
fstUllage | 4085 | Family Status | Family Status 'FS' | R | BitEnum | 10 |
utpUllage | 4086 | Update Time | Update Time Period 'UTP'. Indicates the maximum period between updates of the process variable. | R | Time | 8 |
simulateUllage | 4087 | Set Simulation | Desired setting of the process variable simulation. If enabled, the process variable will be simulated and won't show the actual process value. | W | Enum | 2048 |
propertiesUllage | 4088 | Properties | Properties, indicate e.g. the simulation state. | R | BitEnum | 10 |
dfoUllageMass | 408B | Format Ullage Mass | Display format for Ullage Mass. Local for HART applications, no correlation with device's local display. | R/W | Enum | 4096 |
dvlUllageMass | 408A | Ullage Mass | By applying a suitable conversion table, the distance to the medium can be converted into its mass. It is only available if the conversion table is configured for mass conversion. | R/W | Float | 10 |
uslUllageMass | 408C | Upper Sensor Limit | Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. | R | Float | 8 |
lslUllageMass | 408D | Lower Sensor Limit | Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. | R | Float | 8 |
mspUllageMass | 408E | Minimum Span | Minimum Span Value- Defines the smallest allowable difference between the Upper Range Value and the Lower Range Value. | R | Float | 8 |
dfaUllageMass | 408F | Family | Device Variable Family | R | Enum | 8 |
dqaUllageMass | 4090 | Data Quality | Process Data Quality 'PDQ' | R/W | Enum | 10 |
lstUllageMass | 4091 | Limit Status | Limit Status 'LS' | R/W | Enum | 10 |
fstUllageMass | 4092 | Family Status | Family Status 'FS' | R | BitEnum | 10 |
utpUllageMass | 4093 | Update Time | Update Time Period 'UTP'. Indicates the maximum period between updates of the process variable. | R | Time | 8 |
simulateUllageMass | 4094 | Set Simulation | Desired setting of the process variable simulation. If enabled, the process variable will be simulated and won't show the actual process value. | W | Enum | 2048 |
propertiesUllageMass | 4095 | Properties | Properties, indicate e.g. the simulation state. | R | BitEnum | 10 |
eSelectionAnalogOutput | 4097 | eSelectionAnalogOutput | R/W | Enum | 4096 | |
eSelectionCurrentOutput | 4098 | eSelectionCurrentOutput | R/W | Enum | 4096 | |
PVloopUnits | 2EE0 | AO unit | R | Enum | 64 | |
PVloopDamping | 2EE1 | Added damp | Analog Output Added Damping Value- Damping time constant applied the Analog Output. The units of this variable are always in seconds. | R | Float | 64 |
PVloopCurrentUpperEndPoint | 2EE2 | 100% Current | Output current of the 100% signal | R/W | Float | 64 |
PVloopCurrentLowerEndPoint | 2EE3 | 0% Current | Output current of the 0% signal | R/W | Float | 64 |
PVloopCurrentUpperLimit | 2EE4 | Upper Ext. Range | Configure the upper extended range in mA (Fct. C2.1.4) | R/W | Float | 64 |
PVloopCurrentLowerLimit | 2EE5 | Lower Ext. Range | Configure the lower extended range in mA (Fct. C2.1.4) | R/W | Float | 64 |
SVloopCurrent | 2EE8 | SV output value | SV output value | R/W | Float | 66 |
SVloopUnits | 2EE9 | AO unit | R | Enum | 64 | |
SVloopDamping | 2EEC | Added damp | Analog Output Added Damping Value- Damping time constant applied the Analog Output. The units of this variable are always in seconds. | R | Float | 64 |
SVloopCurrentUpperEndPoint | 2EED | AO hi end pt | Analog Output Upper Endpoint Value- Defines the upper endpoint, of the respective Analog Output, for normal operating conditions | R | Float | 64 |
SVloopCurrentLowerEndPoint | 2EEE | AO lo end pt | Analog Output Lower Endpoint Value- Defines the lower endpoint, of the respective Analog Output, for normal operating conditions | R | Float | 64 |
SVloopCurrentUpperLimit | 2EEF | Upper Limit Value | The maximum value of the analog signal. | R | Float | 64 |
SVloopCurrentLowerLimit | 2EF0 | Lower Limit Value | The minimum value of the analog signal. | R | Float | 64 |
SVpercentRange | 2EF1 | SV % range | Percent of range of the HART Secondary Variable (SV); tracks the associated measured value with respect to the Lower Range Value and Upper Range Value. | R | Float | 34 |
SVupperRange_value | 2EF3 | URV | Upper Range Value- Defines the operational endpoint from which the Analog Value, and the 100% point of the Percent Range are derived. In addition, the Upper Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. | R/W | Float | 32 |
SVlowerRange_value | 2EF4 | LRV | Lower Range Value- Defines the operational endpoint from which the Analog Value, and the 0% point of the Percent Range are derived. In addition, the Lower Range Value defines an operational endpoint which the alarms associated with the Analog Value, and the alarms associated with the Digital Value representation are derived. | R/W | Float | 32 |
TVloopCurrent | 2EF7 | TV output value | TV output value | R/W | Float | 66 |
TVloopUnits | 2EF8 | AO unit | R | Enum | 64 | |
TVloopDamping | 2EFB | Added damp | Analog Output Added Damping Value- Damping time constant applied the Analog Output. The units of this variable are always in seconds. | R | Float | 64 |
Name | ID | Label | Description | Type | Access | Class |