Loading…
Name ID Label Description Type Access Class
rmt_flow_flange_type 1FAB Flange type Flange Type- Hardware, adjacent to the sensor, that physically connects the process to the sensor. R/W Enum 2048
rmt_flow_flange_material 1FAC Flnge matl Flange Material- Construction material described by the variable. flange_type R/W Enum 2048
rmt_flow_meter_installation 1FAA Meter type Meter Installation- Defines whether there is a meter installed or not and possibly what information the meter will display. R/W Enum 256
liner_material 1F41 Liner matl Liner Material- Material of construction of the liner. R/W Enum 2048
electrode_type 1F42 Electrode typ Electrode Type- Physical shape of the electrode. R/W Enum 2048
electrode_material 1F43 Electrode matl Electrode Material- Material of construction of the electrode. R/W Enum 2048
flow_tube_tag 1F44 Flo tube tag Flow Tube Tag- Text that is associated with the flow tube. R/W PackedAscii 2048
special_base_vol_unit 1F47 Base vol unit Process Variable Base Unit- Special units reference to create a custom unit. Process variable special units = variable special_process_variable_unit_conv_number * (variable special_process_variable_base_unit / variable special_process_varaible_base_time_unit). R/W Enum 32
special_base_time_units 1F48 Base time unit Base Time Unit- Special time reference to create a custom unit. Process variable special units = variable special_process_variable_unit_conv_number * (variable special_process_variable_base_unit / variable special_process_varaible_base_time_unit). R/W Enum 32
special_unit_conv_number 1F49 conversion number Special Unit Conversion Number- Arithmetic factor used in converting standard units to special units. R/W Float 32
special_vol_unit 1F4A Vol unit Special Volume Unit- Text string used to designate special volumetric unit. R/W ASCII 32
special_flow_rate_unit 1F4B Flo rate unit Special Flow Rate Unit- Text string used to designate special flow rate units. R/W ASCII 32
coil_drive_frequency 1F4D Coil driv freq Coil Drive Frequency- Frequency that the coils operate at. R/W Enum 8
pulse_output_units 1F4E FO1 Puls out unit Pulse Output Unit- Engineering units that the frequency andtotalizer outputs will be displayed with. R/W Enum 32
gross_total_units 1FAD ?? R/W Enum 0
pulse_scaling 1F4F Puls scaling Pulse Scaling Factor- Magnitude of process variable per pulse. R/W Float 512
pulse_width_value 1F50 Puls width Pulse Width- Width of the frequency output pulse on frequency output number 'X'. R/W Integer 512
low_flow_cutoff 1F51 Lo flo cutoff Low Flow Cutoff- Set point that determines when the process variable will indicate 0 rather than some nominally small value. R/W Float 64
flow_tube_size 1F52 Line size Line Size- Nominal inside diameter of the pipe adjacent to the sensor. R/W Integer 8
signal_processing_status 1F53 Status Signal Processing Status- Turns signal processing on or off. Signal processing is an averaging algorithm used to prevent noisy input signals from affecting the output. R/W Enum 32
signal_processing_samples 1F54 Samples Signal Processing Number of Samples- Number of input samples to be averaged. R/W Integer 32
signal_processing_percent 1F55 % rate Signal Processing Percent- This number sets up a limiting band around the average value to determine when an input sample is noisy. Inputs samples that are outside of this band are not included in the averaging algorithm. R/W Integer 32
signal_processing_limit 1F56 Time limit Signal Processing Limit- The limit factor is used to catch step changes in flow. If the input signals are either above, or below the average value for more than the limit time the output will be driven to the new level, and averaging will start over at this point. R/W Integer 32
flow_tube_calibration_number 1F58 Calib num Flow Tube Calibration Number- This number is uniquely associated with the flow tube, and is used to compensate for gain and zero shifts associated with the specific tube. The calibration number is calculated at the factory and is stamped on the flow tube. R/W ASCII 8
total_control 1F67 Totlizer cntrl Totalizer Control Code- Controls the operation of all available totalizers. W Enum 16
Name ID Label Description Type Access Class