Loading…
Name ID Label Description Type Access Class
signal_processing_samples 1F54 ｻﾝﾌﾟﾙ Signal Processing Number of Samples- Number of input samples to be averaged. R/W Integer 32
signal_processing_percent 1F55 % ﾚｰﾄ Signal Processing Percent- This number sets up a limiting band around the average value to determine when an input sample is noisy. Inputs samples that are outside of this band are not included in the averaging algorithm. R/W Integer 32
signal_processing_limit 1F56 ﾀｲﾑ ﾘﾐｯﾄ Signal Processing Limit- The limit factor is used to catch step changes in flow. If the input signals are either above, or below the average value for more than the limit time the output will be driven to the new level, and averaging will start over at this point. R/W Integer 32
flow_tube_calibration_number 1F58 ｷｬﾘﾌﾞﾚｰｼｮﾝ ﾅﾝﾊﾞｰ Flow Tube Calibration Number- This number is uniquely associated with the flow tube, and is used to compensate for gain and zero shifts associated with the specific tube. The calibration number is calculated at the factory and is stamped on the flow tube. R/W ASCII 8
total_control 1F67 積算計ｺﾝﾄﾛｰﾙ Totalizer Control Code- Controls the operation of all available totalizers. W Enum 16
auxiliary_output 1F6A AUX ｱｳﾄ Auxiliary output- Discrete switch closure output that signals either reverse or 0 flow through the flow tube. R/W Enum 1024
operate_mode 1F6D ｵﾍﾟﾚｰﾄ ﾓｰﾄﾞ Noise Supression- Level or mode of noise supression. R/W Enum 8
flow_units 1F7B PV 単位 ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ単位 - 単位はﾃﾞｼﾞﾀﾙ値, 最小ｽﾊﾟﾝ, Upper ﾚﾝｼﾞ値, Lower ﾚﾝｼﾞ値, Lower ｾﾝｻｰ ﾘﾐｯﾄ, Upper ｾﾝｻｰ ﾘﾐｯﾄの表示に使用されます。 R/W Enum 32
flow_value 1F7C PV ﾌｨｰﾙﾄﾞ機器ﾊﾞﾘｱﾌﾞﾙ - ﾃﾞｼﾞﾀﾙ値は時間に大きく関係し, ﾕｰｻﾞｰの干渉には影響されません。 R/W Float 34
flow_analog_value 1F7D AO1 AO (ｱﾅﾛｸﾞ出力値) - ﾉｰﾏﾙ ｵﾍﾟﾚｰﾃｨﾝｸﾞ ﾓｰﾄﾞでのﾃﾞｼﾞﾀﾙ値で表示します。 R/W Float 66
Name ID Label Description Type Access Class