Loading…
Name ID Label Description Type Access Class
load_for_close_latch_number 4C2F LfC Latch Number The measurement must exceed either of the alarm limits as many times as the latch number indicates. R/W Float 2049
calibration_status 4C3A Calibration Status Codes R Unsigned 2048
calibration_sub_state 4C3B Calibration SubState Codes R Unsigned 2048
calibration_error_code 4C3C Calibration Error Codes R Unsigned 2048
calib_request 4C3F Calibration Request for CMD #232 Defines which calibration to start. See Table 11.9. in ND9100H(T) Field Device Specification. W Unsigned 2048
calib_parameter 4C40 Calibration Parameter for CMD #232 This parameter is required for some calibrations. W Float 2048
alarms_disabled 4C42 Statuses Disabled Enables (0) or disables (1) all warnings and alarms reported by Command #48. Disabling affects also to More Status Available -bit. R/W Enum 2048
test_start_code 4C45 Test start code. Defines which offline test is started. See Table 11.13 in ND9100H(T) Field Device Specification W Unsigned 2048
points_in_mpst 4C46 Number of Steps in Multipoint Step Test Number of steps in Multipoint Step test. Must be in range 1-10. W Unsigned 2048
test_status_code 4C49 Test status code. Offline test status code. See Table 11.14 in ND9100H(T) Field Device Specification. R Unsigned 2048
Name ID Label Description Type Access Class