Loading…
Name ID Label Description Type Access Class
lab_value_3_in_percent_solids 402F Laboratory Value 3 Lab Value 3 - P152: The measured density of the third sample of the sludge. R/W Float 16
maximum_measurable_value_in_percent_solids 4035 Maximum % Solids Max % Solids - P160: The maximum % solids that the system is expected to measure. From this value the Control Unit can select the optimum frequency for the particular application. If the maximum % solids is low then a higher frequency will provide better resolution. R/W Float 16
attenuation_at_1mhz 407B Attenuation Attenuation @ Frequency A - D850: The latest value of attenuation measured by the system at a frequency of 1MHz (or 3.7MHz). R Float 3
attenuation_at_3mhz 407C Attenuation Attenuation @ Frequency B - D851: The latest value of attenuation measured by the system at a frequency of 3.3MHz. R Float 3
temperature_of_control_unit 401A Control Unit Temperature Temperature of Control Unit - D844: The internal temperature of the Control Unit. R Float 3
frequency_of_operation 407E Frequency in Use Frequency in use - D860: The sensor frequency that is currently being used by the Control Unit. R Enum 3
logging_memory_free 407F Logging Memory Free TBD R Float 3
maximum_measurable_density 4080 Maximum Possible Density Maximum measurable density - D861: The maximum density that can be measured by the system - this is calculated from the zero and span calibration data. R Float 3
attenuation_unsmoothed 4082 Attenuation Undamped Attenuation Undamped - D852: The latest value of attenuation being used by the system for density calculation. R Float 3
signal_level 4083 Amplitude Signal Level (Raw A/D bits) - D853: The amplitude of the received signal as measured by the Analog-to-Digital Convertor (ADC). R Float 3
Name ID Label Description Type Access Class