Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
relay_2_minimum_on_time_3 | 40AC | Minimum On Time 2 | Relay 2 Minimum On Time - P423: Once Relay 2 is energised, this parameter defines the minimum time that it will remain energised. | R/W | Integer | 1024 |
relay_2_maximum_on_time | 40AD | Maximum On Time 2 | Relay 2 Maximum On Time - P424: Once Relay 2 is energised, this parameter defines the maximum time that it will remain energised. | R/W | Integer | 1024 |
relay_2_maximum_on_time_3 | 40AE | Maximum On Time 2 | Relay 2 Maximum On Time - P424: Once Relay 2 is energised, this parameter defines the maximum time that it will remain energised. | R/W | Integer | 1024 |
relay2_mode | 403F | Mode 2 | Relay 2 Mode - P420: The mode of operation of Relay 2. It may be assigned to Setpoint operation, Desludging or Alarm indication. Associated timing parameters are editable locally on the Control Unit. | R/W | Enum | 1024 |
relay2_on_point | 4041 | On Point 2 | Relay 2 On Point - P421: The value of PV beyond which Relay 2 contact is closed. Associated timing parameters are editable locally on the Control Unit. | R/W | Float | 1024 |
relay2_off_point | 4043 | Off Point 2 | Relay 2 Off Point - P422: The value of PV beyond which Relay 2 contact is open. Associated timing parameters are editable locally on the Control Unit. | R/W | Float | 1024 |
alarm_action_current | 4021 | Alarm Current | Alarm Current - P402: The value to be adopted by the Current Output when an Alarm condition is detected - the options are Low, High or Hold. | R/W | Enum | 64 |
current_output_range | 4022 | Current Span | Current Span - P403: The range of the Current Output - the options are 0-20 mA or 4-20 mA. | R/W | Enum | 64 |
memory_fault_alarm | 4038 | Memory Fault Alarm | Memory Fault Alarm Action - P560: This parameter defines which outputs are to be affected by the Memory Fault Alarm - options are Relay, Current Output, Both or None. | R/W | Enum | 64 |
pv_out_of_limits | 4036 | PV Out of Limits | PV Out of Limits Alarm Action - P540: This parameter defines which outputs are to be affected by the PV Out of Limits Alarm - options are Relay, Current Output, Both or None. | R/W | Enum | 64 |
Name | ID | Label | Description | Type | Access | Class |