Loading…
Loading…
Name | ID | Label | Description | Type | Access | Class |
---|---|---|---|---|---|---|
span_at_1mhz | 4085 | Span | Span @ Frequency A - D854: The average of the span calibrations at 1MHz (or 3.7MHz) sensor frequency - measured in units of dB. | R | Float | 3 |
span_at_3mhz | 4086 | Span | Span @ Frequency B - D855: The average of the span calibrations at 3.3MHz sensor frequency - measured in units of dB. | R | Float | 3 |
slope_at_1mhz | 4087 | Slope | Slope A - D858: The calibrated value of attenuation in the medium at 1MHz (or 3.7MHz) in units of dB/%. | R | Float | 3 |
slope_at_3mhz | 4088 | Slope | Slope B - D859: The calibrated value of attenuation in the medium at 3.3MHz in units of dB/%. | R | Float | 3 |
digital_input_status | 408A | Digital Input Status | Digital input status - D835: The status of the control unit Digital Inputs. OFF indicates that the Digital input is inactive and ON indicates that the Digital input is active. A digital input may be used to initiate a desludging operation. | R/W | BitEnum | 3 |
current_input | 408B | Current Input | TBD | R | Float | 3 |
start_on | 4044 | Start On | Start On - P250: The event or condition that will initiate a desludging sequence. This may typically be a Time of day, contact closure or measured density value. This parameter and associated timing parameters are only editable locally on the Control Unit. | R/W | Enum | 64 |
stop_on | 4045 | Stop On | Stop On - P251: The event or condition that will terminate a desludging sequence. This may typically be a Time Interval, a contact closure or measured density value. This parameter and associated timing parameters are only editable locally on the Control Unit. | R/W | Enum | 64 |
stop_if | 4046 | Stop If | Stop If - P252: The event or condition that will terminate a desludging sequence early. This may typically be a contact closure or measured density value. This parameter and associated timing parameters are only editable locally on the Control Unit. | R/W | Enum | 64 |
start_time_1 | 408E | Start Time 1 | Start Time 1 - P253: If starting a desludge sequence based on Time of Day, this is the Time at which the sequence will start. If set to 00:00 then that start time is not used. | R/W | Integer | 64 |
Name | ID | Label | Description | Type | Access | Class |