Loading…
Name ID Label Description Type Access Class
set_frequency_of_operation 4030 Set Sensor Frequency Set Frequency of Operation - P630: This controls the frequency drive to the transmit crystal - options are 1MHz (or 3.7MHz), 3.3MHz or Automatic. If Automatic then the Control Unit chooses the optimum frequency for the application. R/W Enum 64
minimum_attenuation 403C Minimum dB Minimum dB - P640: The value of attenuation measured by the Sensor below which an Alarm condition will be reported. R/W Float 34
maximum_attenuation 403B Maximum dB Maximum dB - P641: The value of attenuation measured by the Sensor above which an Alarm condition will be reported. R/W Float 34
keypad_sound 40D7 Keypad Sound Keypad Sound - P735: The operation of the keypad can be accompanied by a beep to confirm that the keypress has been actioned. This function can be disabled. R/W Enum 64
display_backlight_mode 40D8 Backlight Control Backlight Control - P575: This controls the backlight for the LCD display. The options are On, Off or Automatic. If Automatic is selected then the backlight is normally off but will turn on when a key is pressed and remain on for two minutes following a keypress. If the Control Unit detects excessive temperature then it will prevent the backlight from remaining on. If the Control Unit detects particularly low temperature then it will turn the backlight from on even if it is not required by the User. R/W Enum 64
language_ 40D9 Language Language - P737: The Control Unit menu system and parameter display can be presented in a choice of languages - options are English, German, French, Swedish and Polish. R/W Enum 64
DD_revision 4104 DD Device Description R Integer 4096
TA_axis 4107 100 R Float 4096
cop_gary_arc_data 4108 R/W Float 4096
co_gary_arc_data 4109 R/W Float 4096
Name ID Label Description Type Access Class