Loading…
Name ID Label Description Type Access Class
api_thermal_exp_coeff 41C0 Thermal Expansion Coefficient This parameter allows you to select the Thermal Expansion Coefficient API. The units are the inverse of the temperature user units. R/W Float 8
api_ref_temp 41C1 Reference Temperature This parameter allows you to select the Reference Termperature for API. The units must be the same as the temperature user units. R/W Float 8
enable_api 41C2 Enable API This parameter allows you to enable/disable the api feature R/W Enum 8
rs485_protocol 41C3 Protocol This parameter defines the protocol that will be used on the RS485 physical layer. R/W Enum 2048
rs485_baudrate 41C4 Baud Rate This parameter defines the baud rate for the protocol that will be used on the RS485 physical layer. R/W Enum 2048
rs485_parity 41C5 Parity This parameter defines the parity for the protocol that will be used on the RS485 physical layer. R/W Enum 2048
rs485_stop 41C6 Stop Bits This parameter defines the number of stop bits for the protocol that will be used on the RS485 physical layer. R/W Unsigned 2048
modbus_address 41C7 Modbus Slave Address This parameter defines the Modbus slave address. Addresses 1-15,32-47,64-79, or 96-110 are allowed R/W Unsigned 2048
printer_type 41C8 Printer Type The type of printer being used. R/W Enum 2048
data_bits 41C9 Data Bits The number of data bits the printer communications protocol requires. 7 or 8 is valid R/W Unsigned 2048
Name ID Label Description Type Access Class