Loading…
Name ID Label Description Type Access Class
poll_var_2 4122 Опрошенная переменная 2 This represents the variable code which will be read via HART for the compensation. R/W Enum 128
poll_type_code 411D Polling Type This parameter identifies which compensation algorithms will be enabled within the device based on the polling being done. R/W Enum 128
update_rate 4123 Update Rate This parameter is the update rate for process variables through the system. Set the update rate to NORMAL for most applications. Set the update rate to SPECIAL if you are using the device in proving applications or extremely short batch applications. Refer to the user's manual for more information before you change this parameter. R/W Enum 2048
update_rate_var 4124 100 Hz Variable This parameter identifies the transmitter variable that will be updated at 100 Hz. All others will be updated, but at a slower rate. R/W Enum 2048
flow_pres_factor 4125 Flow Pressure Factor Pressure compensation factor applied to flow rate (% change per PSI). R/W Float 8
dens_pres_factor 4126 Density Pressure Factor Pressure compensation factor applied to density (g/Cucm change per PSI). R/W Float 8
zero_pres_factor 4127 Flow Calibration Pressure Pressure at which flow calibration was performed. R/W Float 8
enable_pres_comp 41FC Компенсация давления This parameter allows you to enable/disable the pressure correction feature R/W Enum 8
static_pressure 41FD Давление компенсации This parameter allows you to enter a static pressure when using the pressure correction feature R/W Float 8
enable_extern_temp 4210 Внешняя температура This parameter allows you to enable/disable the external temperature feature R/W Enum 8
Name ID Label Description Type Access Class