Loading…
Name ID Label Description Type Access Class
ao_1_fault_level 40CC Nível de falha This parameter allows you to select the lower or upper mA output level that will indicate a fault condition. The range is 1.0 to 3.6 mA for downscale or 21.0 to 24.0 for upscale. R/W Float 64
ao_2_fault_level 40CF Nível de falha This parameter allows you to select the lower or upper mA output level that will indicate a fault condition. The range is 1.0 to 3.6 mA for downscale or 21.0 to 24.0 for upscale. R/W Float 64
fo_fault_level 40D1 Nível de falha This parameter allows you to select the upper frequency output level that will indicate a fault condition. The maximum value is 15000 Hz. R/W Float 64
density_for_cal 40D3 R/W Float 4096
point_code 40D4 R/W Unsigned 4096
densityfd_for_cal 40D5 R/W Float 4096
temp_for_cal 40D6 Ref temperature User-entered temperature for the purpose of performing an on-line temperature calibration. R/W Float 4096
cutoff_code 40DA Tipo de corte baixo R/W Index 4096
D1 40DB D1 The density, in g/cc, of the air or other low-density fluid used during a 2-point density calibration. R/W Float 8
D2 40DC D2 The density, in g/cc, of the water or other high-density fluid used during a 2-point density calibration. R/W Float 8
Name ID Label Description Type Access Class