Loading…
Name ID Label Description Type Access Class
sensor_matl 40A3 Матер. сенс Configuration information identifying the material of which the sensor is constructed. Informational purposes only - does not affect flowmeter operation. R/W Enum 2048
sp_mass 40A4 Base mass unit A standard engineering unit that serves as the mass component in a special unit. R/W Enum 32
sp_mass_time 40A5 Base mass time A standard unit of time (seconds, minutes, hours, or days) that serves as the time component in a special unit. R/W Enum 32
sp_mass_fact 40A6 Mass flo conv factr A programmable multiplier for the base mass unit in a special unit. R/W Float 32
sp_mass_rate_text 40A7 Mass flo text A 1 to 8 character description of a special unit of flow. R/W ASCII 2048
sp_mass_total_text 40A8 Mass totl text A 1 to 8 character description of a special unit of mass, which is based on the special unit of flow to represent total. R/W ASCII 2048
met_direct 40A9 Направл. потока This paramater enables the user to determine whether the outputs and totalizers will indicate forward, reverse, bi-directional or absolute value flow. R/W Enum 32
slughi 40AA Slug high limit A programmable high limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
sluglo 40AB Slug low limit A programmable low limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
slug_duration 40AC Slug duration A programmable time period, from 0.00 to 60.00 seconds, during which outputs representing flow hold their last measured value before indicating slug flow. R/W Float 4
Name ID Label Description Type Access Class