Loading…
Name ID Label Description Type Access Class
tube_amplitude_R 40BC Right Pickoff Amplitude R Float 10
drive_gain 40BD Drive The drive gain of the transmitter. R Float 10
live_zero 40BE Live Zero Flow Rate This flow value is not effected by the flow cutoff and is damped at 8 seconds. It is to be used for diagnostic purposes only and is not used in ANY flow calculations or totalization. R Float 10
board_temp_700 40BF Board Temperature The board temperature of the core processor. R Float 10
case_temp 40C0 Meter Temperature (T-Series) The meter temperature of the T-Series sensor. R Float 10
FD 40C1 FD A calibration constant generated during a flowing density calibration. R/W Float 8
tot_reset 40C2 Totalizer Reset When this parameter is enabled, you can use the display to reset the totalizer. R/W Enum 256
auto_scroll 40C3 Auto Scroll When this parameter is enabled, you do not need to press the scroll button to scroll through the configured process variables. R/W Enum 256
auto_scroll_rate 40C4 Scroll Time (1-10) This parameter allows you to set the rate at which the display will scroll from one process variable to the next. Display Auto Scroll must be enabled. R/W Unsigned 256
offline_menu 40C5 Offline Menu When this parameter is enabled, you can use the display to access the offline maintenance menu. R/W Enum 256
Name ID Label Description Type Access Class