Loading…
Name ID Label Description Type Access Class
poll_type_code 4192 Polling Type This parameter identifies which compensation algorithms will be enabled within the device based on the polling being done. R/W Enum 128
update_rate 4186 Update Rate This parameter is the update rate for process variables through the system. Set the update rate to NORMAL for most applications. Set the update rate to SPECIAL if you are using the device in proving applications or extremely short batch applications. Refer to the user's manual for more information before you change this parameter. R/W Enum 2048
update_rate_var 4187 Update rate var This parameter identifies the transmitter variable that will be updated at 100 Hz. All others will be updated, but at a slower rate. R/W Enum 2048
flow_pres_factor 4188 Flow factr Pressure compensation factor applied to flow rate (% change per PSI). R/W Float 8
dens_pres_factor 4189 Dens factr Pressure compensation factor applied to density (g/Cucm change per PSI). R/W Float 8
zero_pres_factor 418A Flowcal pressure Pressure at which flow calibration was performed. R/W Float 8
flow_switch_setpoint 418B Flow Switch Setpoint This parameter can be used to trigger a discrete output when the mass flow rate exceeds the configured setpoint. There is a fixed hysteresis of 5% for this setpoint. R/W Float 16
do1_assignment 418C DO is This parameter identifies which condition the discrete output will act upon. R/W Enum 1024
chan_a 418D Channel A This parameter identifies the physical output channel to be configured. Channel 1 is terminals 1 & 2, Channel 2 is terminals 3 & 4 and Channel 3 is terminals 5 & 6. R Enum 64
chan_b 418E Channel B This parameter identifies the physical output channel to be configured. Channel 1 is terminals 1 & 2, Channel 2 is terminals 3 & 4 and Channel 3 is terminals 5 & 6. R/W Enum 64
Name ID Label Description Type Access Class