Loading…
Name ID Label Description Type Access Class
update_rate_var 4187 Update rate var This parameter identifies the transmitter variable that will be updated at 100 Hz. All others will be updated, but at a slower rate. R/W Enum 2048
flow_pres_factor 4188 Flow factr Pressure compensation factor applied to flow rate (% change per PSI). R/W Float 8
dens_pres_factor 4189 Dens factr Pressure compensation factor applied to density (g/Cucm change per PSI). R/W Float 8
zero_pres_factor 418A Flowcal pressure Pressure at which flow calibration was performed. R/W Float 8
flow_switch_setpoint 418B Flow Switch Setpoint This parameter can be used to trigger a discrete output when the mass flow rate exceeds the configured setpoint. There is a fixed hysteresis of 5% for this setpoint. R/W Float 16
do1_assignment 418C DO is This parameter identifies which condition the discrete output will act upon. R/W Enum 1024
chan_a 418D Channel A This parameter identifies the physical output channel to be configured. Channel 1 is terminals 1 & 2, Channel 2 is terminals 3 & 4 and Channel 3 is terminals 5 & 6. R Enum 64
chan_b 418E Channel B This parameter identifies the physical output channel to be configured. Channel 1 is terminals 1 & 2, Channel 2 is terminals 3 & 4 and Channel 3 is terminals 5 & 6. R/W Enum 64
chan_c 418F Channel C This parameter identifies the physical output channel to be configured. Channel 1 is terminals 1 & 2, Channel 2 is terminals 3 & 4 and Channel 3 is terminals 5 & 6. R Enum 64
do_index 41B3 DO index R/W Index 4096
Name ID Label Description Type Access Class