Loading…
Name ID Label Description Type Access Class
sp_volume_fact 40CD Vol flo conv factr A programmable multiplier for the base volume unit in a special unit. R/W Float 32
sp_volume_rate_text 40CE Vol flo text A 1 to 8 character description of a special unit of flow. R/W ASCII 2048
sp_volume_total_text 40CF Vol totl text A 1 to 8 character description of a special unit of volume, which is based on the special unit of flow to represent total. R/W ASCII 2048
rt_freq 40D0 Pres freq The frequency, in Hertz, presently being indicated on the frequency output. R Float 514
fo_scaling_method 4025 FO Scale Method This parameter allows you to scale the frequency output by using freq=flow, pulses/unit, or units/pulse. This parameter must be sent to the device before you make scaling changes. R/W Enum 512
fo_polarity 40D2 Polarity This parameter allows you to set the polarity of the frequency output. R/W Enum 512
fo_mode 40D3 Mode This parameter allows you to set the mode of the second frequency output when dual frequency outputs are configured. R/W Enum 512
pulse_width 40D4 Max pulse width A programmable time period, in seconds, that defines the crossover frequency for the frequency output, where Crossover freq. = 1 / (2 x Pulse width). Below the crossover, the output has a constant ON state, and an OFF state that varies with frequency. R/W Float 512
fixfreq 40D5 Fixed freq A value (in Hertz) that will be indicated on the frequency output for the purpose of a loop test. R/W Float 4096
max_zero 40D6 Zero time The number of readings collected from the sensor during an Auto Zero operation. R/W Unsigned 12
Name ID Label Description Type Access Class