Loading…
Name ID Label Description Type Access Class
tube_amplitude_digital_units 44F0 LPO The pickoff voltage of the sensor measured in Voltage. R Enum 32
tube_amplitude_L 40D1 LPO R Float 10
tube_amplitude_R 40D2 RPO R Float 10
drive_gain 40D3 Drive The drive gain of the transmitter. R Float 10
live_zero 40D4 Live zero flow This flow value is not effected by the flow cutoff and is damped at 8 seconds. It is to be used for diagnostic purposes only and is not used in ANY flow calculations or totalization. R Float 10
board_temp_700 40D5 Board Temperature The board temperature of the core processor. R Float 10
case_temp 40D6 Meter Temp: T-Series The meter temperature of the T-Series sensor. R Float 10
FD 40D7 FD A calibration constant generated during a flowing density calibration. R/W Float 8
tot_reset 40D8 Disp. Total Reset When this parameter is enabled, you can use the display to reset the totalizer. R/W Enum 256
auto_scroll 40D9 Disp. Auto Scroll When this parameter is enabled, you do not need to press the scroll button to scroll through the configured process variables. R/W Enum 256
Name ID Label Description Type Access Class