Loading…
Name ID Label Description Type Access Class
poll_type_code 40F5 Polling Type This parameter identifies which compensation algorithms will be enabled within the device based on the polling being done. R/W Enum 128
update_rate 40FB Update Rate This parameter is the update rate for process variables through the system. Set the update rate to NORMAL for most applications. Set the update rate to SPECIAL if you are using the device in proving applications or extremely short batch applications. Refer to the user's manual for more information before you change this parameter. R/W Enum 2048
update_rate_var 40FC Update rate var This parameter identifies the transmitter variable that will be updated at 100 Hz. All others will be updated, but at a slower rate. R/W Enum 2048
flow_pres_factor 40FD Flow factr Pressure compensation factor applied to flow rate (% change per PSI). R/W Float 8
dens_pres_factor 40FE Dens factr Pressure compensation factor applied to density (g/Cucm change per PSI). R/W Float 8
zero_pres_factor 40FF Flowcal pressure Pressure at which flow calibration was performed. R/W Float 8
enable_pres_comp 41BC Enable Pressure Comp This parameter allows you to enable/disable the pressure correction feature R/W Enum 8
static_pressure 41BD Static Pressure This parameter allows you to enter a static pressure when using the pressure correction feature R/W Float 8
enable_extern_temp 41CE Enable Ext Temp This parameter allows you to enable/disable the external temperature feature R/W Enum 8
static_temperature 41CF Static Temperature This parameter allows you to enter a static temperature when using the external temperature feature R/W Float 8
Name ID Label Description Type Access Class