Loading…
Name ID Label Description Type Access Class
hz_freq 4022 Коэф. частоты The number of cycles, in Hertz, that equal a proportional flow rate represented by the frequency/pulse output. R/W Float 512
hz_rate 4023 Коэф. скорости The flow rate that equals a set frequency if the frequency output represents mass or volume flow; or the mass or volume total that equals a set number of pulses if the frequency output represents mass or volume total. R/W Float 512
slughi 4024 Slug high limit A programmable high limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
sluglo 4025 Slug low limit A programmable low limit on density, which enables the transmitter to indicate slug flow (extremes in fluid density caused by slugs of gas or accumulation of solids in a liquid flow stream) if fluid density goes outside programmed slug flow limits. R/W Float 8
flocal 4026 FlowCal A 10-character factor that describes the sensitivity of the sensor to mass flow. The first 6 characters are the flow rate, in grams/second, per microsecond of time shift between velocity signals from the sensor. The 2nd four characters are the flow temperature coefficient. R/W ASCII 32
fixfreq 4027 Фикс. част A value (in Hertz) that will be indicated on the frequency output for the purpose of a loop test. R/W Float 4096
rt_freq 4028 Pres freq The frequency, in Hertz, presently being indicated on the frequency output. R Float 514
totctl 4029 Управление сумматором Allows the user to Reset all totalizers. NOTE - Inventory totals are NOT reset. R/W Enum 4096
dencal 402A Коэф. калиб. плотн. 14 characters describing the sensitivity of the sensor to density. R/W ASCII 32
rt_zero 402B Zero value A value, in microseconds, representing the phase shift between velocity signals from the sensor when measuring zero flow. R Float 2
Name ID Label Description Type Access Class