Loading…
Name ID Label Description Type Access Class
enable_pres_comp 4138 Pressure Compensation This parameter allows you to enable/disable the pressure correction feature R/W Enum 8
static_pressure 4139 Compensation Pressure This parameter allows you to enter a static pressure when using the pressure correction feature R/W Float 8
enable_extern_temp 413A External Temperature This parameter allows you to enable/disable the external temperature feature. R/W Enum 8
static_temperature 413B Correction Temperature This parameter allows you to enter a static temperature when using the external temperature feature. R/W Float 8
flow_switch_setpoint 413C Setpoint This parameter can be used to trigger a discrete output when the mass flow rate exceeds the configured setpoint. There is a fixed hysteresis of 5% for this setpoint. R/W Float 16
flow_switch_variable_assignment 413D Source The variable that is monitored to determine if a flow switch has occurred. R/W Enum 8
do1_assignment 413E Assignment This parameter identifies which condition the discrete output will act upon. R/W Enum 1024
do1_state 413F Discrete Output State This parameter identifies the state of the discrete output. R/W Enum 2
do1_polarity 4140 Polarity This parameter allows you to set the polarity of the discrete output. R/W Enum 1024
do1_FaultIndication 4141 Fault Action The state to which the discrete output will be set if the transmitter detects a fault with 'Alert Severity' = 'Fault'. If 'None' is selected, the behavior of the discrete output will be controlled by 'Discrete Output Source'. R/W Enum 1024
Name ID Label Description Type Access Class