Loading…
Name ID Label Description Type Access Class
pressure_max_UTP 4013 Pres max UTP Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 8
pressure_min_TD 4014 Pres min TD Minimum Trim Differential- The minimum acceptable difference between the upper and lower trim points. R Float 8
temperature_value 4016 Temp Secondary Variable- Digital representation that tracks the Analog Output(if it exists) Number 2, under normal operating modes R Float 10
temperature_classification 4017 Temp class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R Enum 8
temperature_units 4018 Temp unit Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R/W Enum 8
temperature_PDQ 4019 Temp PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
temperature_LS 401A Temp LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
temperature_status 401B Temp Fmly stat Device Family Status- Indicates additional status information on a device variable for a specific device family. R BitEnum 10
temperature_upper_limit 401C Upper Sensor Limit Value- Defines the maximum usable value for the Upper Range Value. R Float 8
temperature_lower_limit 401D Lower Sensor Limit Value- Defines the minimum usable value for the Lower Range Value. R Float 8
Name ID Label Description Type Access Class