Loading…
Name ID Label Description Type Access Class
pressure_damping_value 1398 Damping Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 8
pressure_serial_number 400A Sensor serial num Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
pressure_device_family 400B R Enum 8
pressure_update_time_period 400C R HartDate 8
pressure_LTP 400D Pres LTP Lower Trim Point- Applied process input at which the last lower trim of the device variable was performed. R Float 8
pressure_UTP 400E Pres UTP Upper Trim Point- Applied process input at which the last upper trim of the device variable was performed. R Float 8
pressure_TPS 400F Pres trim support Trim Points Supported- Indicates the trim points that are supported by the device variable during a trim procedure. R Enum 8
pressure_min_LTP 4010 Pres min LTP Minimum Lower Trim Point- The lowest applied process value that can be used duirng a low trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 8
pressure_max_LTP 4011 Pres max LTP Maximum Lower Trim Point- The highest applied process value that can be used duirng a low trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 8
pressure_min_UTP 4012 Pres min UTP Minimum Upper Trim Point- The lowest applied process value that can be used duirng a high trim procedure (ie, no value lower than this will be accepted by the instrument). R Float 8
Name ID Label Description Type Access Class