Loading…
Name ID Label Description Type Access Class
pressureMaximumUTP 4032 Max upper trim Maximum Upper Trim Point- The highest applied process value that can be used duirng a high trim procedure (ie, no value higher than this will be accepted by the instrument). R Float 0
pressureMinimumTrimDiff 4033 Min trim diff Minimum Trim Differential- The minimum acceptable difference between the upper and lower trim points. R Float 0
pressureSimulated 4034 PV Simulate Fixes PV on desired value. W Enum 0
SensTemperUpdatePeriod_int 4036 Snsr Upd Period The Period During Which the Measured pressure Updates. R/W Unsigned 0
SensTemperDampingValue 4037 Snsr Temper Damping Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 0
SensTemperSimulated 4038 SV Simulate Fixes SV on desired value. W Enum 0
SensTemperSerialNumber 4039 Snsr s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R Unsigned 0
DevTemperUpdatePeriod_int 403B Snsr Upd Period The Period During Which the Measured pressure Updates. R/W Unsigned 0
DevTemperDampingValue 403C Snsr Temper Damping Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R Float 0
DevTemperSimulated 403D TV Simulate Fixes TV on desired value. W Enum 0
Name ID Label Description Type Access Class