Loading…
Name ID Label Description Type Access Class
Actual_Position_DampingValue 400A Temp damp Damping Value- Damping time constant applied to both the Digital Value representation and Analog Value of the respective Analog Output. The units of this variable are always in seconds. R/W Float 0
Actual_Position_SerialNumber 400B Sensor s/n Sensor Serial Number- Uniquely identifies the sensor from which the Digital Value representation or Field Device variable is primarily derived. R/W Unsigned 2048
Actual_Position_Simulated 400C Simulate W Enum 2052
Actual_Position_UpdatePeriod_int 413B Temp Update Period R Unsigned 0
Desired_Position_Value 400F Setpoint Instrument Primary Variable expressed in Engineering Units. Valid only if sensor. Calibration has been completed and accurate displacer and process fluid data have been entered in instrument memory R Float 10
Desired_Position_Units 4010 Setpoint Units Field Device Variable Unit- Engineering unit to be displayed with the Digital Value representation, Minimum Span, Upper Range Value, Lower Range Value, Lower Sensor Limit, and Upper Sensor Limit R Enum 8
Desired_Position_Family 4011 Device family Device Family- Indicates the family (i.e, pressure, temperature, flow, etc.) that the device variable belongs. R Enum 2048
Desired_Position_Classification 4012 Class Classification- Indicates the unit code expansion table used for a particular dynamic or device variable. R/W Enum 0
Desired_Position_PDQ 4013 PDQ Process Data Quality- Indicates the overall process data quality of the device variable value. R Enum 10
Desired_Position_LS 4014 LS Limit Status- Indicates whether the device variable is limited (i.e., not responding to a process). R Enum 10
Name ID Label Description Type Access Class